FOXBORO E69F-BI2-MS Current-to-Pneumatic Signal Converter
Technical Specifications
- Input Signal:
- Standard: 4-20 mA DC
- Optional ranges: 4-12 mA, 12-20 mA, 10-30 mA, or 30-50 mA DC (configurable via model code).
- Output Signal:
- Standard: 3-15 psi (0.2-1.0 bar or kg/cm²)
- Alternative ranges available upon request.
- Input Impedance: 170 Ω (typical).
- Response Time: Adjustable (typically 5-10 ms).
- Accuracy: ±0.5% of full scale.
- Repeatability: ±0.1% of full scale.
- Temperature Range:
- Operating: -40°C to 85°C
- Storage: -40°C to 90°C
Foxboro C2RPS-PSM Redundant Power Supply Module
Technical Specifications
- Input Voltage: 220V AC (50/60 Hz) or 24V DC (configurable based on model)
- Output Voltage: 250V AC / 24V DC (depending on configuration)
- Rated Current: 10A per channel
- Connectors: RJ45 (8-pin) for redundant power link
- Operating Temperature: -40°C to 85°C
- Storage Temperature: -40°C to 90°C
- Humidity: 5% to 95% non-condensing
- Certifications: UL, CE, CSA, and IEC 60320-1 compliance
- Dimensions: 22.5 mm x 16.5 mm x 8.5 mm
- Weight: 10g
Foxboro E69F-T12-JRS Temperature Transmitter
Product Type: Temperature Transmitter with RTD Input (Pt100/Pt1000)
Overview:
The Foxboro E69F-T12-JRS is a temperature transmitter from the Foxboro E Series product line. It accepts input from a Resistance Temperature Detector (RTD) sensor (Pt100 or Pt1000) and converts the resistance value into a standardized 4–20 mA DC output signal with HART communication capability. The "T12" designation indicates RTD input type, and "JRS" identifies the specific output and housing configuration.
Foxboro 1C31169G02 Industrial Control Module
Technical Specifications
- Input/Output Channels:
- Supports multiple discrete and analog I/O channels (specific configurations vary by model).
- Discrete inputs: 125 VAC/VDC (differential or single-ended).
- Discrete outputs: 5-60 VDC (relay or solid-state).
- Analog inputs: 4-20 mA, 0-10 V, or 0-5 V with HART communication capability.
- Analog outputs: 4-20 mA or 0-10 V.
- Power Supply:
- Dual redundant DC power inputs (24 VDC or 48 VDC) for fail-safe operation.
- Optional AC power supply (120/230 VAC, 50/60 Hz).
ExtremeNetworks A2H124-24FX Industrial Ethernet Switch
Technical Specifications
- Ports:
- 24 x 100BASE-FX fiber ports (multi-mode or single-mode, depending on module)
- 2 x Gigabit Ethernet SFP uplink ports (for high-speed backbone connections)
- Switching Capacity: Up to 17.6 Gbps
- Forwarding Rate: 9.5 Mpps (million packets per second)
- MAC Address Table: 16K entries
- VLAN Support: Up to 4096 virtual LANs for network segmentation
- Jumbo Frame Support: Up to 9216 bytes for efficient data transmission
- Stacking: Supports up to 8 units in a stack, creating a virtual switch with 140.8 Gbps bandwidth and 192 x fiber ports + 16 x Gigabit uplinks
- Power Supply:
- Dual DC 48V power inputs (redundant design for failover)
- AC power option available (120/230V, 50-60Hz)
ExtremeNetworks A4H124-24FXP0973JN
Technical Specifications
- Switching Capacity: Up to 17.6 Gbps
- Forwarding Rate: 9.5 Mpps (million packets per second)
- Port Configuration:
- 24 x 10/100 Ethernet ports (100Base-FX fiber ports)
- 4 x Gigabit Ethernet uplink ports (SFP slots for fiber or copper modules)
- MAC Address Table: 16K entries
- VLAN Support: Up to 4096 virtual LANs
- Jumbo Frame Support: Up to 9216 bytes
- Stacking Capability: Supports stacking up to 8 units, creating a virtual switch with up to 140.8 Gbps of capacity and 384 x 10/100 ports + 16 x Gigabit uplinks
