Show sidebar
Show 9 12 18 24

ProSoft PLX31-EIP-ASCII

  • Product Name:​ EtherNet/IP to ASCII Communication Gateway
  • Product Introduction:​ Standalone DIN-rail industrial protocol gateway that bridges EtherNet/IP-enabled PACs (Rockwell ControlLogix/CompactLogix, Schneider) with serial ASCII devices such as weigh scales, barcode readers, printers, and legacy terminals. Acts as EtherNet/IP Client/Server and ASCII Master/Slave simultaneously.
Read more
Quick view

ProSoft PLX31-EIP-SIE EtherNet/IP to Siemens Industrial Ethernet Gateway

Core Function

  • Protocol Conversion: Bridges EtherNet/IP (CIP, PCCC) and Siemens Industrial Ethernet protocols for seamless interoperability between Rockwell controllers and Siemens PACs .
  • Data Exchange: Supports high-speed bidirectional transfers of up to 10,000 16-bit registers, ideal for large-scale industrial data synchronization .
Read more
Quick view

ProSoft PLX32-EIP-PND EtherNet/IP to PROFINET Gateway

Functional Features

    1. Bidirectional Data Integration
      • Seamless data mapping between EtherNet/IP™ and PROFINET® I/O controllers without ladder logic programming .
      • Supports 100 configurable commands per client for customized data reads/writes .
    2. High Reliability & Redundancy
      • Dual Ethernet ports enable redundant network topologies, eliminating single-point failures .
      • SD Card Slot: Stores configurations for rapid recovery or transfer between gateways .
Read more
Quick view

ProSoft PLX32-EIP-SIE Industrial Ethernet Communication Gateway

Technical Specifications
  • Power and Physical Parameters
    • It operates on a 24 VDC power supply and has a power consumption of approximately 5W, which is compatible with standard industrial power supply systems.
    • Its dimensions are 118 mm x 85 mm x 75 mm, and it adopts a compact structural design that saves installation space. It can be flexibly installed in various industrial control cabinets.
    • It has an operating temperature range of -40°C to 85°C, which allows it to run stably in extreme temperature environments such as cold workshops and high-temperature processing areas. It also features strong environmental adaptability with protection against dust and moisture.
  • Communication Parameters
    • It is equipped with Ethernet RJ-45 interfaces, supporting 10/100 Mbps Ethernet transmission rates to meet the data transmission needs of most industrial scenarios.
    • It supports dual subnet capability, allowing each protocol to reside on separate Ethernet subnets, which enhances the flexibility of network configuration.
    • It is compatible with multiple protocols including EtherNet/IP, Siemens Industrial Ethernet and Modbus TCP/IP, and realizes smooth protocol conversion and data interaction between different networks.
Read more
Quick view

ProSoft PLX32-MBTCP-SIE

Product Name:​ ProSoft Technology PLX32-MBTCP-SIE Modbus TCP/IP to Siemens S7 Industrial Ethernet Communication Gateway
Product Introduction:​
An industrial protocol gateway that enables bidirectional data exchange between Modbus TCP devices (Client and/or Server) and Siemens S7 PLCs (S7-300/400/1200/1500) over Siemens Industrial Ethernet. Eliminates need for custom drivers in mixed-vendor automation networks.
Read more
Quick view

ProSoft PTQ-PDPMV1

Product Brief:​ Single-slot Quantum backplane module that turns a Schneider Quantum PLC into a PROFIBUS DP-V1 Class 1 Master. Enables cyclic I/O exchange and acyclic services (alarms, parameterization, diagnostics) with up to 125 PROFIBUS slave devices.
Read more
Quick view

ProSoft PTQ-PDPMV1 PROFIBUS DPV1 Master Network Interface Module for Quantum Processors

Technical Specifications
  • Power and Physical Parameters
    • It uses a 24VDC power supply and has a power consumption of 1.5W, which is compatible with standard industrial power supply configurations.
    • Its dimensions are 110 mm × 95 mm × 50 mm and weighs 0.5 kg. The compact size allows for flexible installation in industrial control cabinets.
    • It operates within a temperature range of -40°C to 85°C and can withstand a humidity range of 5% to 95% without condensation, adapting to harsh industrial environmental conditions.
  • Communication Parameters
    • It serves as a PROFIBUS DPV1 master interface and supports baud rates ranging from 9600 bps to 12 Mbps, with automatic baud rate detection for all valid PROFIBUS DPV1 rates.
    • It can connect up to 125 slave devices when using repeaters, and can also connect PROFIBUS PA slaves to the network through DP/PA couplers or links.
    • It requires Ethernet connectivity for normal operation, and uses UDP messaging to back up data in status registers between modules to determine switchover conditions.
Read more
Quick view

ProSoft RLX2-IHNF-A 802.11abgn Fast Industrial Hotspot

  • Technical Specifications
    • Physical and Environmental Parameters
      • It adopts a die-cast aluminum-plastic housing and DIN rail mounting. Its dimensions are 14.8 cm × 11.8 cm × 3.8 cm, and it weighs 499 grams, which is compact and easy to install in control cabinets.
      • The operating temperature range is -40°C to 70°C, and it can withstand up to 100% relative humidity without condensation. It complies with IEC 60068 anti-shock and anti-vibration standards, resisting 20g three-axis shock and 5g vibration from 10Hz to 150Hz.
    • Power Parameters
      • It supports 10 - 24 VDC power supply and is compatible with the 802.3af PoE standard. It can be powered by a PoE injector, reducing wiring complexity.
      • Its power consumption is less than 8W for Series C and less than 9W for Series B, featuring low energy consumption and adapting to long-term continuous operation in industrial systems.
    • Communication Parameters
      • It supports multiple wireless standards such as 802.11a, 802.11g, 802.11n, 802.11h and 802.11i, and is equipped with 3 RP-SMA antenna connectors for MIMO technology.
      • The adjustable transmit power ranges from 17 dBm to 22 dBm, and the receiver sensitivity is as low as -92 dBm at low transmission rates, ensuring stable signal reception.
      • It is equipped with one 10/100/1000 Base-T shielded RJ45 Ethernet port and one RS232 DB9 female serial port, supporting direct communication conversion between Modbus TCP/IP and Modbus RTU.
Read more
Quick view

ProSoft RLX2-IHNF-W-E

Read more
Quick view

ProSoft Technology ILX34-MBS485

Product Name:​ Modbus Serial Communication Module for Allen-Bradley 1734 Point I/O & CompactLogix L1
Product Introduction:​ Slot-in RS-485 Modbus RTU/ASCII master or slave module that bridges serial field devices (meters, VFDs, sensors) into Rockwell EtherNet/IP or ControlNet architectures via the 1734 Point I/O backplane. No external gateway required.
Read more
Quick view

R.STAHL 80701‑1‑HR311

Product Name: Explosion‑Proof Field Bus Module / Intrinsically Safe Module Product Description: R.STAHL 80701‑1‑HR311 is intrinsically‑safe explosion‑proof field bus component for hazardous area, apply in explosive gas atmosphere, realize field‑bus signal connection and signal isolation for explosion‑risk zone. Technical Specifications: ATEX / IECEx explosion‑proof certification; intrinsically‑safe circuit parameter; operating temperature for hazardous location; bus interface specification.
Read more
Quick view

R.STAHL ESVP‑1502‑NWB‑5

Product Name: Explosion‑Protected Field Solenoid Valve Control Unit Product Description: ATEX and IECEx certified explosion‑proof field‑mount control device for hazardous area environments, designed for on‑site valve actuation and signal feedback in explosive gas or combustible dust classified zones. Technical Specifications: Explosion protection certification compliant with ATEX and IECEx standards; protection rating IP66 / IP67; rated operating voltage 24 V DC; operating ambient temperature ‑40 °C ~ +60 °C; threaded interface mechanical mounting.
Read more
Quick view