• Processor Architecture: Triple-redundant design with three independent processors running in parallel.
• Voltage Range: 20 V DC to 32 V DC.
• Power Consumption: 80 W (maximum load).
• Processor Clock Speed: 100 MHz.
• I/O Interface: Triple-redundant module-to-module communication bus.
• SOE Buffer Size: 1000 events (expandable to 4000 events in CI buffer).
• Operating Temperature: 0 °C to 60 °C (32 °F to 140 °F).
• Storage Temperature: -25 °C to 70 °C (-13 °F to 158 °F).
• Dimensions (L × W × H): 30.3 cm × 9.3 cm × 26.6 cm.
• Weight: 2.94 kg (shipping weight: 4 kg).
• Communication Protocols: Supports Modbus TCP/IP, Ethernet, and serial interfaces for seamless integration with other systems.

Technical Specifications

1. Electrical Specifications
   • Operating Voltage: 20–32 VDC (rated 24 VDC)
   • Power Consumption: 30 VA (max)
   • Memory Capacity: 32 MB RAM, 128 MB flash memory for program and data storage
   • Processor Architecture: Hardware - Implemented Fault - Tolerant (HIFT) with triple redundant processing cores
   • Communication Interfaces: Front - panel RS232 serial port, Ethernet (TCP/IP), Modbus TCP/IP; supports redundant communication links
   • Time Synchronization: IRIG - B002 and B122 time code input for precise event correlation
   • Isolation: Reinforced electrical isolation between field circuits, backplane, and module core
2. Mechanical Specifications
   • Chassis Compatibility: Exclusively designed for T8100 Trusted TMR controller chassis
   • Form Factor: Standard T8000 - series module size, 19" rack - mount compatible
   • Weight: Approximately 1.9 kg (varies slightly by revision)
   • Mounting: Hot - swappable via push - button "education" function; no system shutdown required for replacement
   • Indicators: Front - panel LEDs for power status, module health, fault alerts, voting status, and communication link integrity

Technical Specifications

1. Electrical Specifications
   • Operating Voltage: 20–32 VDC (rated 24 VDC, supplied by T8100 chassis backplane)
   • Power Consumption: 24 W (excludes T8153 adapter power draw)
   • Communication Interfaces: 2×10/100BaseT Ethernet (copper), 4×RS422/485 (via T8153), 1×RS232 front‑panel diagnostic port
   • Ethernet Data Rate: 10/100 Mbit/s (auto‑sensing)
   • Serial Port Baud Rate: 1.2–115.2 kbps (configurable)
   • Processor: Motorola PowerPC (dedicated communication processor)
   • Memory: Flash memory (firmware), RAM (runtime data), EPROM (bootstrap software)
   • Signal Isolation: Reinforced 1500 VDC isolation between communication circuits and chassis ground
2. Mechanical Specifications
   • Form Factor: 3U Eurocard single‑width module
   • Mounting: Installs in any single‑width slot of T8100 controller/expander chassis
   • Dimensions (H×W×D): 241 mm × 30 mm × 300 mm (9.5 in × 1.2 in × 11.8 in)
   • Weight: 1.23 kg (2.71 lbs)
   • Indicators: Front‑panel LEDs for power, Ethernet link/activity, serial port activity, module fault, and system status
   • Companion Adapter: T8151B requires T8153 rear‑mounted adapter for external serial/Ethernet connections

Technical Specifications

1. Electrical Specifications
   • Power Rating: 750W continuous output (24Vdc main output)
   • Input Voltage: 110/240Vac (auto-switching, 47–63Hz)
   • Input Current: 7.5A (110Vac), 3.75A (240Vac) (full load)
   • Output Voltages: 24Vdc ±0.5V (main, regulated); 28Vdc ±1V (adjustable field power)
   • Output Current: 31.25A (24Vdc, max); 26.8A (28Vdc, max)
   • Power Factor Correction: ≥0.95 (at full load)
   • Ripple & Noise: ≤50mV peak-to-peak (24Vdc output)
   • Current Sharing: Active current sharing (±5% load balance across redundant modules)
   • Protection Features: Overvoltage (27Vdc threshold), overcurrent (35A threshold), overtemperature (85°C threshold), short-circuit protection (auto-recovery)