GE IC694BEM331 RX3i Genius Bus Controller Module
The IC694BEM331 is a Genius Bus Controller (GBC) module manufactured by GE Fanuc (now Emerson Automation Solutions) for the PACSystems RX3i control platform . This module enables the RX3i controller to communicate with a wide range of industrial devices over the proprietary Genius serial bus network . It serves as the communication nexus between the central PLC and distributed field I/O stations, translating data and managing the high-speed serial link to equipment such as VersaMax I/O stations, Genius I/O blocks, Field Control stations, and Genius Handheld Monitors (HHM) .
GE IC693PBM200 PROFIBUS-DP Master Module
The IC693PBM200 is a PROFIBUS-DP Master communication module designed for the GE Fanuc Series 90-30 PLC system. It functions as the primary interface between the PLC and a PROFIBUS-DP fieldbus network, enabling high-speed data exchange with distributed field devices, remote I/O stations, drives, and other automation equipment. The module scans all configured slave devices, sending outputs and reading inputs, with support for up to 125 DP slaves and 244 bytes of input plus 244 bytes of output data per slave.
GE IC693MDL930 4 Amp Isolated Relay Output Module
Product Introduction
The IC693MDL930 is a discrete output module manufactured by GE Fanuc (now Emerson Automation Solutions) for the Series 90-30 Programmable Logic Controller (PLC) system. It provides 8 normally-open (Form A) relay circuits for controlling user-supplied output loads. Each output point is individually isolated from all other points, and each features a separate common power output terminal.
GE IC693CPU372 PLUS Central Processing Unit
Product Introduction
The IC693CPU372 is a high-performance central processing unit for the GE Fanuc Series 90-30 PLC system . This single-slot CPU serves as the core controller, executing user logic programs, processing I/O data, and managing network communications . It features an embedded enhanced Ethernet interface with two auto-sensing 10/100 Mbps RJ-45 ports, enabling direct TCP/IP communication with Series 90, PACSystems, and VersaMax PLCs, as well as host computers running CIMPLICITY software or programming tools . The built-in Ethernet switch supports daisy-chaining of Ethernet nodes, reducing the need for external network hardware .
GE IC693CMM311 Communications Coprocessor Module
Product Introduction
The IC693CMM311 is a Communications Coprocessor Module (CMM) manufactured by GE Fanuc (now Emerson Automation Solutions) for the Series 90-30 PLC system . It provides high-performance communication capabilities by offloading serial communication tasks from the main CPU, enabling efficient data exchange with external devices . The module features two serial ports: Port 1 is dedicated to RS-232, while Port 2 is configurable for RS-232 or RS-485 applications . An IC693CBL305 Wye cable is supplied with the module to separate the two ports from the single connector, simplifying field wiring .
GE IC693BEM331D Genius Bus Controller Module
Product Introduction
The IC693BEM331D is a Genius Bus Controller module from GE Fanuc, designed for the Series 90-30 Programmable Logic Controller (PLC) system. It provides the interface between the PLC and the Genius I/O bus, enabling high-speed serial communication and data exchange with up to 31 connected Genius I/O devices. This module allows the central controller to manage remote distributed I/O, including discrete, analog, and special-purpose field modules.
GE IC693ALG221J 4-Channel Analog Current Input Module
Product Introduction
The IC693ALG221J is an analog current input module designed for the GE Fanuc Series 90-30 PLC system . It provides four independent channels specifically optimized for 4–20 mA and 0–20 mA current loops, converting field signals from transmitters and sensors into digital data for the CPU . Typical applications include monitoring continuous industrial variables such as pressure, temperature, and flow .
GE IC693ACC302 Auxiliary Battery Module
Product Introduction The IC693ACC302 is an auxiliary battery module manufactured by GE Fanuc, designed to provide extended backup power for the volatile memory in PACSystems and Series 90-30 CPUs . It serves as a high-capacity alternative to standard memory backup batteries, ensuring that user programs and data are retained during power outages for significantly longer periods .
Technical Specifications Product Type: Auxiliary Battery Module
GE IC670GBI002H Field Control Bus Interface Unit
Product Introduction The IC670GBI002H is a Bus Interface Unit designed as part of the GE Fanuc Field Control series. It functions as the primary communication and control head for a remote I/O station, managing the data exchange between a host controller and up to eight locally mounted Field I/O modules across a Genius Bus network .
Technical Specifications Product Type: Bus Interface Unit
GE IC660ELB921H Relay Output Module
Product Introduction
This configuration identifies the IC660ELB921H as a relay output module for industrial automation systems. It provides control signals for various field devices through normally open contact relays. The module supports CPU redundancy and is configurable via PCIM Configuration Software, designed for integrating control outputs within GE automation architectures.
GE IC660BBD024 12/24 VDC 32-Circuit Source I/O Block
The IC660BBD024 is an intelligent, configurable I/O block from the GE Genius I/O series, now under Emerson Automation . This module serves as a compact interface between a controller and field devices that send or receive binary signals. It features 32 identical discrete circuits, each configurable as an input, output, or output with feedback, providing exceptional application flexibility . The block is specifically a sourcing type, meaning it sends current to field output devices such as relays, contactors, lamps, and low-power control devices .
GE IC200MDL740E 16-Point Discrete Output Module
Product Introduction
The IC200MDL740E is a discrete output module from the GE Fanuc VersaMax I/O series, designed to translate internal PLC logic signals into physical switching actions for external industrial devices. This module features 16 independent output points with positive logic (sourcing) characteristics, operating at a nominal supply voltage of 24 VDC to drive a wide range of actuators and indicators .
