AutomationDirect EZ-S6M-F - Image 1
AutomationDirect EZ-S6M-F - Image 2
Click to enlarge
AutomationDirect EZ-S6M-F
AutomationDirect EZ-S6M-F - Image 2
Schischek EXL-IRU-1
Schischek EXL-IRU-1
Back to products
HIMA F60MI24014 982400006
HIMA F60MI24014 982400006

AutomationDirect EZ-S6M-F

Product Brief:​ A DIN-rail mount safety relay module designed to monitor one or two safety mats or safety edges and provide a fail-safe output to stop a machine or process. Compatible with ASO Safety Solutions safety mats (typically 0.4–2.5 kΩ loop resistance). Conforms to EN ISO 13849-1 Performance Level (typically PL d) and IEC 61508SIL CL2.

Category:
Description
Specifications:
  • Inputs:​ 1 or 2-channel safety mat/edge loop (resistance-monitored)
  • Reset:​ Manual or automatic reset selectable via DIP switch
  • Outputs:​ 2 NO (normally open) safety contacts + 1 NC auxiliary contact (typical for EZ-S6M variants)
  • Contact Rating:​ 6 A @ 250 VAC (resistive)
  • Supply Voltage:​ 24 VDC (or 24 VAC on some versions — confirm label)
  • Response Time:​ ≤ 30 ms (mat activation to safety output drop-out)
  • Short-circuit Monitoring:​ Yes — cross-short detection between input lines
  • LED Indicators:​ Power, Mat OK, Output Energized, Fault
  • Mounting:​ 35 mm DIN rail (EN 50022)
  • Width:​ Typically 22.5 mm
  • Temp Range:​ 0 to +55 °C
  • Certifications:​ cULus, CE, TÜV (PL d / Cat. 3)
Features:
  • Dual-channel monitoring with cross-fault detection
  • Start-up test and cyclic self-check
  • External device monitoring (EDM) optional on some EZ-series variants
Application:​ Perimeter guarding — operator steps on safety mat → machine stops; loading station with safety edge on press bed.
Installation Notes:
  • Connect mat loop to S11/S12 (Ch1) and S21/S22 (Ch2) terminals per wiring diagram.
  • Use only listed safety mats with specified loop resistance. Do NOT parallel multiple mats on same channel unless approved by risk assessment.
  • Perform function test (step-on mat → verify safety output opens) after commissioning.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “AutomationDirect EZ-S6M-F”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

AMAT 0100-71267 Semiconductor Control Module

echnical Specifications:
  • Compatibility: Designed specifically for integration with Applied Materials' semiconductor processing systems.
  • Electrical Characteristics: Details about voltage requirements, current ratings, and power consumption would be specified in technical documentation tailored to its specific application within the system.
  • Physical Attributes: Dimensions and weight suitable for installation within semiconductor manufacturing equipment, ensuring compatibility with existing hardware and facilitating ease of replacement or maintenance.
  • Environmental Tolerance: Engineered to withstand the demanding conditions inside semiconductor fabrication facilities, including resistance to electromagnetic interference, temperature variations, and particulate matter.
Read more
Quick view

CONTROL 9180B-8

  • Power Supply: Supports AC 220V/50Hz or DC 24V, depending on design requirements.
  • Communication Interfaces: Equipped with RS-485, Ethernet, and Modbus protocols for seamless integration with other devices or systems.
  • Processor: High-performance CPU ensures rapid response and accurate control.
  • Protection Rating: IP65 or higher for dust and water resistance, suitable for harsh industrial conditions.
  • Operating Temperature: Wide temperature range to adapt to diverse industrial settings.
Read more
Quick view

KEBA FB201 — Comprehensive Data Sheet

Procurement Guidance

  1. Compatibility Notes
    • Verify suffix codes (e.g., FB201/xxx) for I/O capacity and environmental ratings .
    • Requires KEBA RobotStudio or ECL-3 software for configuration .
  2. Critical Accessories
    • Backplane Adapter (e.g., SDCS-PIN-24) for PLC integration .
    • IP65 Housing for harsh environments (e.g., oil rigs, substations) .
  3. Avoid Mismatches
    • Servo drives → Refer to KEBA KeDrive.
    • HMIs → Use KEBA ETT Series.
Read more
Quick view

MOLEX SST-PFB-SLC

Product Introduction

The MOLEX SST-PFB-SLC is a Profibus scanner module designed for use with the Allen-Bradley SLC 500 controller series. It is manufactured by SST, a brand under Molex. The module enables communication between an SLC processor (SLC 5/03 or later) and DP remote I/O devices on a Profibus network, acting as a Profibus DP remote I/O scanner.
Read more
Quick view

NOUENVOG AAP3798102-00131

Application Scenarios

  1. Compressor Control Systems
    • Cameron TA-Series: Manages inlet valve positioning, oil pressure, and vibration monitoring in TA2000/TA3000 compressors .
  2. Energy Infrastructure
    • Pump Stations: Regulates flow/pressure in pipeline transport .
    • Gas Turbine Backup: Synchronizes auxiliary systems during grid failures .
  3. Industrial Automation
    • Production Lines: Interfaces with Schneider/Bently Nevada PLCs for safety interlocks .
    • Remote Monitoring: Transmits operational data to SCADA via Modbus .
Read more
Quick view

Radisys SBC486DX66 Industrial Single-Board Computer

Technical Specifications (for a typical Radisys SBC):
  • Processor Architecture: High-performance multi-core processors optimized for handling large volumes of session traffic.
  • Memory: Equipped with ample RAM and storage to support real-time processing, session management, and logging activities.
  • Network Interfaces: Multiple Gigabit Ethernet ports supporting SIP, RTP, and other communication protocols to facilitate seamless connectivity between different network segments.
  • Security Features: Comprehensive security measures including encryption, authentication, and denial-of-service protection.
  • Scalability: Designed to scale from small businesses up to large enterprises and service providers, managing thousands of sessions simultaneously.
  • Environmental Tolerance: Built to operate reliably in standard data center environments
Read more
Quick view

SAACKE FSC-01

Technical Specifications:
  • Supply Voltage: 24 V DC (typical), with options for 110–230 V AC in certain configurations
  • Power Consumption: Low power draw, optimized for continuous operation
  • Operating Temperature: -10°C to +55°C
  • Storage Temperature: -25°C to +70°C
  • Humidity Range: 5% to 95% relative humidity, non-condensing
  • Protection Rating: IP20 (suitable for indoor panel mounting)
  • Input Compatibility: Accepts signals from flame detectors including UV, IR, and ionization sensors
  • Output Relays: Equipped with safety-rated relay outputs for burner activation, alarm signaling, and system shutdown
Read more
Quick view

XP POWER F8B6D4A3G3

Technical Specifications

  • Output Characteristics: It is a quad - output power supply, but specific output voltage and current values are not clearly provided in the existing information.
  • Dimensions: Approximately 15 × 11 × 7 inches (LxWxH).
  • Weight: About 8 lbs.
Read more
Quick view