GE IC695RMX128

  • Product Introduction: The IC695RMX128 is a single-slot reflective memory module for GE PACSystems RX3i universal backplanes, delivering 128 MB user memory for real-time data sharing across redundant CPU pairs and reflective memory networks. It uses 2.12 Gbaud fiber-optic links (LC connectors) for 2.1 GB/s deterministic data transfer, supports hot insertion/removal, dynamic packet sizing, and network error detection, enabling seamless failover and data synchronization in mission-critical industrial control systems.
  • Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
  • Module Type: Single-slot reflective memory module for RX3i redundant CPU systems and reflective memory networks

GE IC697ALG320

  • Product Introduction: The IC697ALG320 is a high-level analog output module for GE Series 90-70 PLC systems, featuring 4 individually configurable channels for voltage or current outputs, with no jumpers/DIP switches needed for setup. It offers 16-bit DAC resolution (14-bit monotonicity), output-backplane isolation, factory calibration data stored in EEPROM, and supports unipolar/bipolar voltage (0-10 VDC, ±10 VDC) and current (0-22.5 mA, 4-20 mA) signals, designed for precise control of industrial actuators, valves, and process control loops.
  • Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
  • Module Type: Single-slot high-level analog output module for Series 90-70 PLC baseplates

GE IC697BEM711

  • Product Overview: A single-slot Bus Receiver Module for GE Series 90-70 PLCs, enabling high-speed parallel bus expansion from the main CPU rack to up to 7 expansion racks with 500 Kbytes/sec data transfer and 15m (50 ft) cable distance. It must be installed in Slot 1 of each expansion rack, uses software configuration (no DIP switches), supports output hold-last-state on CPU loss, and requires the IC697ACC702 terminator in the last rack.
  • Technical Specifications - Form Factor: Single slot, weight 1.06 lbs (0.48 kg), shielded metal enclosure
  • Technical Specifications - Slot Requirement: Must be installed in Slot 1 of Series 90-70 racks

GE IC697BEM713

  • Product Overview: A single-slot Bus Transmitter Module for GE Series 90-70 PLCs, installed in the main CPU rack to drive parallel bus expansion to up to 7 Bus Receiver (IC697BEM711) expansion racks. It provides a high-performance parallel programming port and an expansion port for daisy-chaining, with 500 Kbytes/sec data transfer and 15m (50 ft) max cable distance. It uses software configuration, has 3 status LEDs, and requires +5 VDC backplane power.
  • Technical Specifications - Form Factor: Single slot, weight 0.85 lbs (0.38 kg), shielded metal enclosure
  • Technical Specifications - Installation Slot: Main CPU rack (Slot 2 recommended, Slot 1-4 allowed)

GE IC697BEM721

  • Product Introduction: The IC697BEM721 is a single-slot I/O Link Interface Module designed for GE Series 90-70 PLC systems, providing a high-speed serial interface between the PLC and up to 16 CNC-compatible I/O Link devices. It features dual RS-422/485 ports, conformal coating for harsh environments, and three LED indicators for real-time status monitoring, enabling seamless integration and data exchange in industrial automation applications.
  • Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
  • Module Type: I/O Link Interface Module for Series 90-70 PLCs

GE IC697CHS770

  • Product Overview: A 17-slot rear-mount rack for GE Series 90-70 PLCs, supporting IC697 PLC modules and IC687 VME I/O/communication modules. It accepts plug-in AC/DC or DC IC697 power supplies, works with external supplies via adaptors, and enables redundancy with IC687 redundancy comms and bus transmitters. It has a 5 VDC backplane, 17 standard 0.8-inch slots, and is certified for industrial use.
  • Technical Specifications - Slot Configuration: 17 standard slots, 0.8-inch spacing
  • Technical Specifications - Mounting Style: Rear-mount, fits standard 19-inch racks

GE IC697CMM711

  • Product Introduction: The IC697CMM711 is a single-slot communications coprocessor module for GE Series 90-70 PLC systems, equipped with a 12 MHz 80C186 microprocessor and dual configurable RS-232/RS-422/RS-485 serial ports (25-pin D-shell female connectors). It supports CCM (master/slave/peer), SNP/SNP‑X (master/slave), and Modbus RTU (slave only) protocols, enabling multi‑drop network data exchange between the PLC and other industrial devices, with software configuration eliminating manual jumpers/switches.
  • Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
  • Module Type: Single‑slot communications coprocessor module for Series 90-70 baseplates
  • Microprocessor: 12 MHz 80C186

GE IC697CMM742

  • roduct Introduction: The IC697CMM742 is a single‑slot TCP/IP Ethernet (Type 2) Interface Module for GE Series 90‑70 PLC systems, delivering 10 Mbps Ethernet connectivity compliant with IEEE 802.3 standard. It has three network ports (10BaseT RJ‑45, 10Base2 BNC, AUI 15‑pin D), one RJ‑11 RS‑232 Local Station Manager Port, and one 15‑pin D‑type Serial Software Load Port, supporting TCP/IP, SRTP, EGD, and Modbus TCP/IP protocols for seamless integration with Ethernet LAN, SCADA, HMI, and other industrial devices.
  • Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
  • Module Type: Single‑slot Ethernet Interface Module (Type 2) for Series 90‑70 PLC baseplates

GE IC697CPX928-FE

  • Product Overview: Single-slot CPU module for GE Series 90-70 PLC systems, equipped with a 96MHz 80486DX4 microprocessor, 6MB battery-backed RAM, and 256KB non-volatile user flash memory. It delivers 0.4µs per Boolean function execution, supports 12K mixed I/O and 8K analog I/O, and offers 3 serial ports (1 RS232, 2 RS485) plus a factory reset port. Controlled via a 3-position run/stop switch or software, it uses 7 LEDs for status monitoring and is configured entirely via software.
  • Technical Specifications - Processor: 80486DX4 microprocessor, 96MHz clock speed, 0.4µs per Boolean function execution, 32-bit instruction set, 32-bit floating-point support

GE IC697MDL653

  • Product Overview: Single-slot discrete input module for GE Series 90-70 PLC systems, delivering 32 24VDC input points divided into 4 isolated groups of 8 points each. It supports both positive and negative logic wiring, is compatible with proximity switches, and offers selectable 1ms/10ms input filtering plus one interrupt-configurable input. It has 1500V input-to-backplane isolation and 500V isolation between groups, operates on 24VDC nominal input (-3 to +30VDC range), and uses 0.3A from the 5V backplane.
  • Technical Specifications - Input Configuration: 32 discrete input points, split into 4 isolated groups of 8 points each

GE IC697PWR711

  • Product Overview: 100W rack-mounted power supply for GE Series 90-70 PLC systems, installed in the leftmost slot of standard IC697 racks, providing +5VDC, +12VDC, -12VDC outputs and logic sequencing signals to the backplane. It accepts selectable 120/240 VAC or 125 VDC input, features electronic short-circuit/overcurrent protection, power factor correction, and supports single or dual-rack operation with a prewired interconnection cable. It maintains output through at least one input line cycle during power loss and meets industrial safety standards.
  • Technical Specifications - Input Voltage: AC: 90-264 VAC (47-63 Hz); DC: 100-150 VDC; selectable via external jumper

GE IC697PWR711K

  • Product Introduction: The IC697PWR711K is a 100W rack-mounted switching power supply module designed for GE Series 90-70 PLC systems, installed in the leftmost slot of standard IC697 or VME Integrator racks via a 48-pin backplane connector. It delivers +5 VDC, +12 VDC, and -12 VDC regulated outputs to power PLC CPUs, I/O modules, and peripherals, with support for 120/240 VAC or 125 VDC input, power factor correction, and ride-through capability for transient power loss. It can power one or two racks when total load stays within 100W rating, connected via a prewired inter-rack cable.
  • Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
  • Module Type: 100W switching power supply for Series 90-70 PLC backplanes