ZIEHL MSF-220-SE
Product Brief: Monitors up to two independent strings of PTC thermistors (DIN 44081/44082) embedded in motors, dry-type transformers, or bearings. If any PTC resistance exceeds the trip threshold (> 1,800 Ω typical, switching point < 4,000 Ω) the relay drops out and triggers alarm/shutdown. Includes power-on delay to suppress nuisance tripping when supply is applied (transformer secondary used as supply). Two independently configurable changeover relays for pre-alarm and trip/off functions.
KONGSBERG MRU-M-MB3
Product Brief: High-precision solid-state Motion Reference Unit providing real-time six degrees of freedom (roll, pitch, yaw, heave, surge, sway) and linear accelerations. Designed for marine dynamic positioning, crane heave compensation, ROV/AUV navigation aiding, antenna stabilization, and wave monitoring. Uses MEMS inertial sensors with Kalman-filter sensor fusion; optionally aided by external GNSS/DVL for enhanced heave accuracy.
Vibro-Meter MPC4 VM600 200-510-076-114
Product Brief: The MPC4 is a plug-in 6U Eurocard that acquires up to four dynamic (AC) signals from vibration/position sensors (accelerometers, velocity pickups, eddy-current probes) plus two tacho/keyphasor inputs. It performs digital filtering (high-pass / low-pass / band-pass, 6–60 dB/octave, software-configurable), integration/differentiation, true RMS / peak / peak-peak calculation, order tracking, and compares against programmable Alert/Danger setpoints. Communicates with VM600 IOC4T/IOT modules via backplane for alarm relays, analog outputs, and host communication. Fully compliant with API 670.
GE MMY30-R2B2G
Product Brief: Industrial-grade, microprocessor-based dew point transmitter designed for continuous online measurement of moisture in gases. Utilizes a thin-film aluminum oxide (Al₂O₃) capacitive sensor. Loop-powered (2-wire) with 4–20 mA output proportional to dew point temperature or ppmv. Option code R2B2G typically denotes specific housing/config (R2 = ½″ NPT process connection / sampling arrangement; B2 = display & keypad; G = general purpose / metric units — verify against official option table).
EPRO MMS3210-020-020
Product Series: EPRO MMS3000 Transmitter Series (MMS3210 sub-family)
Product Brief: Stand-alone or rack-mountable transmitter that accepts two eddy-current probe inputs (PR 6422/23/24/25/26 series with appropriate preamplifier) and converts shaft relative vibration/displacement signals into two independent proportional 0/4–20 mA analog outputs. Can be configured for single max-value output or dual independent outputs. Includes built-in self-test and "OK" status contact. Conforms to API 670.
EPRO MMS6210
Product Series: EPRO MMS6000 Series — part of AMS 6500 / MMS3000 machinery protection system
Product Brief: Plug-in measurement module for continuous monitoring of relative shaft displacement (axial thrust position / differential expansion) using two independent eddy-current proximity probe inputs. Provides conditioned DC position signal, alarm/danger evaluation per channel, and 0/4–20 mA plus 0–10 V outputs for integration into DCS/PLC. Compliant with API 670.
Hirschmann MM20-Z6Z6Z6Z6SBH
Product Brief: Hot-swappable expansion module that adds four independent 100 Mbps Fast Ethernet fiber ports via SFP slots to a Hirschmann MS20 or MS30 chassis. SFP transceivers (not included) are user-installable for multimode or singlemode fiber as required.
Model Decoding: MM20 = Media Module 20-series; Z6 = 100BASE-FX SFP slot; 4× Z6 = four SFP ports; SBH = hardware revision / conformal coating option for industrial environments
MDB MLSI-DR11-W
Product Series: MDB MLSI Series — legacy-compatible interface / modern DIN-rail I/O variant
Product Brief: Compact DIN-rail mounted digital input/output and relay interface used for machine panel control, OEM equipment integration, or as a modern replacement/adaptation of classic DEC DR11-W parallel I/O concepts in industrial cabinets. Provides optically isolated 24 VDC digital inputs and relay contact outputs (SPST/SPDT per variant) for low-voltage load switching.
Microsonic MIC+130/IU/TC
Product Series: microsonic mic+ Series — cylindrical M30 version
Product Brief: Non-contact ultrasonic proximity/distance sensor for level, position, and object detection; measures distance via time-of-flight (echo propagation time) and provides one configurable analog output (4–20 mA / 0–10 V) plus two programmable switching (NPN/PNP) outputs. Equipped with TouchControl pushbuttons and 3-digit LED display for teach-in configuration.
Honeywell CC-TUIO31
Product Brief
9-inch non-redundant multi-signal wiring terminal base exclusively designed for CC-PUIO31 32-channel universal IOM; supports mixed analog input, analog output, digital input, digital output and pulse frequency signal termination on single terminal unit; integrates multi-type signal surge protection, HART coupling, channel isolation and pulse signal conditioning circuits, unified mechanical wiring interface for all universal field signal types.
Honeywell CC-TDOB01
Product Brief
9-inch non-redundant wiring terminal base for 24 VDC discrete digital output control signals; provides screw terminal connections for solenoid valves, motor starter coils, indicator lights and discrete field actuators; integrates per-channel short-circuit protection, inductive load flyback suppression and channel isolation circuits, mechanical interface between digital output IOM and discrete field actuator wiring.
Honeywell CC-TDIL01
Product Brief
9-inch non-redundant field wiring terminal base dedicated to 24 VDC discrete digital input signals; provides screw terminal connections for binary field devices (limit switches, pressure trip contacts, motor status feedback), integrates debounce filtering, overvoltage surge protection and channel isolation circuits, mechanical interface between digital input IOM and discrete field wiring.
