GE Hydran M2 Transformer Monitoring Device
Technical Specifications:
- Gas Detection Range: 0-2000 ppm (equivalent to hydrogen, H₂)
- Humidity Detection Range: 0-100% relative humidity (%RH)
- Gas Detection Accuracy: ±10% of reading ±25 ppm (equivalent to hydrogen)
- Humidity Detection Accuracy: ±2% relative humidity (%RH)
- Gas Detection Repeatability: Better than ±5% or ±5 ppm
- Humidity Detection Repeatability: 2% relative humidity (%RH)
GE IC693CHS397 Modular CPU Backplane
Technical Specifications
- Number of Slots: Five slots for installing I/O modules, one dedicated slot for the power supply module on the far left, and one expansion port.
- Power Supply: The power slot on the left side requires a dedicated power module. The rated current is 170 mA at 5 VDC.
- Expansion Capability: Can be connected to additional expansion baseplates through the 25-pin D-type female expansion connector on the right side, with a maximum cable length of 50 feet (15 meters).
- Compatibility: Supports various GE Series 90-30 I/O modules and special-purpose modules. The number of expandable baseplates depends on the CPU type (e.g., up to four baseplates with CPU 331, 340, and 341, or up to seven baseplates with CPU 350 and above).
GE IC693CHS391 Modular CPU Backplane
Technical Specifications
- Number of Slots: Ten slots for installing modules, including a dedicated slot for the power supply module on the far left.
- Power Supply: Rated current of 420 mA and rated voltage of 5 VDC for the power supply module slot.
- CPU Support: The first slot supports CPU modules marked as CPU/1. The number of additional baseplates supported depends on the CPU type (e.g., up to four baseplates with CPU 341, 340, and 331, or up to seven baseplates with CPU 350).
GE IC693BEM341 FIP Bus Controller Module
Technical Specifications
- FIP Frequency: 2.5 MHz
- Interface Type: Two 9-pin D-type FIP connectors, one RS485 communication port
- Work Voltage: 24V DC (allowable fluctuation range: 19.2V DC – 28.8V DC)
- Current Consumption: Approximately 100mA (at 24V DC work voltage)
- Operating Temperature: 0°C to 55°C
- Storage Temperature: -40°C to 70°C
GE IC693BEM331G Ethernet Communications Module
Technical Specifications
- Network Interface: Dual 10/100 Mbps Ethernet ports with auto-negotiation
- Communication Protocols: Supports TCP/IP, UDP/IP, and GE's proprietary SRTP (Secure Real-Time Transport Protocol)
- Memory: 2 MB of flash memory for firmware and configuration storage
- Power Consumption: 3.5 W typical, 4.5 W maximum
- Operating Temperature: 0°C to 60°C (32°F to 140°F)
- Storage Temperature: -40°C to 85°C (-40°F to 185°F)
GE IC693ALG392 Analog Output Module
Technical Specifications
- Output Channels: Eight single-ended output channels
- Output Range:
- Voltage: 0 to 10 V (unipolar), -10 to +10 V (bipolar)
- Current: 0 to 20 mA, 4 to 20 mA
- Resolution: 15 to 16 bits per channel
- Update Rate: 8 milliseconds for all channels
- Power Supply: Isolated 24 VDC power supply
GE IC693ALG390 Analog Output Module
Technical Specifications
- Number of Channels: The module typically features multiple analog output channels, enabling it to control several devices simultaneously.
- Output Range: Supports a wide range of analog output signals, such as 0-20 mA, 4-20 mA, or 0-10 VDC, depending on the specific configuration and requirements.
- Resolution: Offers high-resolution output, ensuring precise control over connected devices.
- Accuracy: Provides accurate analog signal conversion, minimizing errors in control applications.
- Operating Temperature: Designed to operate reliably in a broad temperature range, typically from 0°C to 60°C.
GE IC693ACC301 Programmable Logic Controller (PLC) Module
Technical Specifications
- Input/Output Channels: 8 channels, freely combinable for inputs and outputs
- Power Supply: 24V DC, non-isolated power supply
- Safety Rating: Certified for use in SIL 2 safety-rated environments
- Operating Temperature: 0°C to 60°C
- Storage Temperature: -40°C to 85°C
- Humidity: 5% to 95% non-condensing
GE IC687RCM711 Redundant Communication Module
Technical Specifications
- Communication Protocol: Supports Ethernet/IP (compliant with ODVA standards), including Class 1 (real-time control) and Class 3 (non-real-time data) modes.
- Network Interface: Two RJ45 Ethernet ports, supporting 10/100 Mbit/s adaptive speed with Auto-MDIX auto-crossover functionality.
- Processor: 32-bit microprocessor with a main frequency of 200 MHz.
- Memory: 128 MB RAM for data caching and 64 MB Flash for configuration storage.
- Power Supply: Draws power from the internal 5V DC bus of GE RX3i PLC, with a maximum power consumption current of ≤300 mA.
GE IC670MDL740K Digital Output Module
Technical Specifications
- Number of Output Channels: 16 digital output channels
- Output Signal Types: Supports 24 VDC output signals
- Output Current: 0.5 A per channel
- Maximum Total Output Current: 8 A (for all channels combined)
- Output Voltage Range: 10 VDC to 30 VDC
- Power Consumption: 111 mA from the Bus Interface Unit (BIU) power supply
GE IC670MDL640 Digital Input Module
Technical Specifications
- Number of Input Channels: 16 digital input channels
- Input Signal Types: Accepts 24 VDC input signals
- Input Voltage Range: 0 to 30 VDC, with a nominal voltage of 24 VDC
- User Input Current: 7.5 mA per point
- Current Consumption: 75 mA from the Bus Interface Unit (BIU) power supply with all inputs active; maximum current consumption of 83 mA
- On-State Voltage Rating: +15 VDC to +30 VDC for positive logic; -15 VDC to -30 VDC for negative logic
GE IC670CHS002 I/O Terminal Module
Technical Specifications
- Terminal Count: 37 terminals
- Supported Modules: Can accommodate two field control modules
- Installation Method: Supports DIN rail or panel mounting, designed for horizontal installation
- Wire Specifications: Each terminal can accommodate two solid or stranded copper wires ranging from AWG #14 (2.1 mm²) to AWG #22 (0.35 mm²)
- Operating Temperature: 0°C to 60°C
- Storage Temperature: -40°C to 85°C
