GE PQMII-T20-C
Product Overview
The GE PQMII-T20-C is a high-precision power quality meter from the PQM II Series, engineered for continuous monitoring, analysis, and control of three-phase electrical systems in industrial, commercial, and utility applications. It delivers comprehensive measurement of voltage, current, power, energy, frequency, harmonics, and power quality events (sags, swells, transients) with industry-leading accuracy. The unit supports 20 current inputs and 4 voltage inputs for multi-circuit monitoring, integrates 4 isolated analog outputs, 4 relay outputs, and 4 switch inputs for control/alarming, and offers Modbus RTU communication via RS232/RS485. It includes advanced features such as 63rd harmonic analysis, voltage disturbance recording (VDR), event logging, and waveform capture to diagnose power quality issues and protect critical assets.
DEIF PPU/2/GS
Product Overview
The DEIF PPU/2/GS (GE PPU2GS) is a compact, rugged generator paralleling and protection unit designed for precise control, synchronization, and protection of single or multiple generator sets in marine, industrial, and offshore power systems. It enables seamless paralleling of generators to share load, optimizes fuel efficiency, and provides comprehensive protection against electrical faults and operational anomalies. The unit integrates voltage, current, frequency, and power factor monitoring with advanced protection algorithms, ensuring safe and reliable power distribution. It supports manual or automatic synchronization, load sharing, and generator shedding based on predefined parameters, and interfaces with SCADA systems via analog outputs and optional communication modules.
GE PCH1026
Product Overview
The GE PCH1026 is a highly configurable digital structural vibration monitor engineered for low‑frequency (0.05–1000 Hz) monitoring in wind turbines, developed in collaboration with global turbine manufacturers and protecting over 100,000 units worldwide. It integrates a 3‑axis internal accelerometer (X/Y/Z) and up to 4 external sensor inputs to capture acceleration, velocity, and displacement across critical turbine structuresPCH Engineering A/S. The unit uses advanced DSP with 50% overlap FFT, 127 zoom ranges, and programmable filters to isolate structural modes from operational noise, delivering precise RMS/Peak/Peak‑to‑Peak measurements.
GE MX150
Product Overview
The GE MX150 is a microprocessor-based controller designed for GE Zenith ZTG/ZTGD/ZTGSE/ZTGDSE series automatic transfer switches (ATS), serving as the core control unit for emergency and standby power systems. It replaces the legacy MX100 controller and integrates a microprocessor board, LCD/keypad interface, and isolated I/O for seamless interaction with dual power sources (S1: normal, S2: emergency). The controller monitors voltage, frequency, and phase synchronization of both sources, automatically transferring loads to the backup source when the normal source fails, and retransferring once the normal source stabilizes within preset parameters.
Motorola MVME51005E-0163
roduct Overview
The MVME51005E-0163 is a high-performance 6U VME64x single-board computer (SBC) from GE (formerly Motorola Computer Group, later Emerson/Artesyn), built for mission-critical embedded systems requiring deterministic processing, rugged reliability, and long-term availability. It features the Freescale PowerPC 7455 (G4) processor running at 1.0 GHz, with 32KB L1 (I/D) cache, 2MB on-die L2 cache, and an AltiVec 128-bit SIMD unit for accelerated signal processing. The board integrates 512MB ECC DDR SDRAM (expandable to 1GB/2GB), 8MB Flash, and CompactFlash Type I/II storage for reliable data retention and boot capabilities. It includes dual 10/100/1000Base-T Ethernet ports, two RS-232/422 serial ports, USB 2.0, and a 64-bit PMC slot for I/O expansion, alongside a VME64x interface (64-bit/66MHz, 2eSST support) for seamless integration with legacy and modern VME systems.
Motorola MVME-2400
Product Overview
The MVME-2400 is a high-performance VME single-board computer (SBC) from GE (formerly Motorola Computer Group), designed for embedded computing in industrial automation, military/aerospace, telecommunications, and medical systems. It features the low-power, high-performance MPC750 PowerPC microprocessor (233/350/450 MHz) with 32KB/32KB L1 cache and 1MB L2 cache, delivering robust processing for real-time control and data acquisition. The board integrates 32MB–512MB ECC SDRAM (100 MHz PC100), 8MB Flash, and 1MB PROM for reliable operation in harsh environments, and includes dual PMC (PCI Mezzanine Card) slots for flexible I/O expansion—supporting up to six PMCs with optional PMCspan modules. It provides 10/100Base-T Ethernet, RS232/RS485 serial ports, and VME64 interface (64-bit/66MHz, 40MB/s max) for seamless integration with legacy and modern systems.
GE MM2-PD-1-2-120
Product Overview
The MM2-PD-1-2-120 is a microprocessor-based intelligent motor management system from GE Multilin’s Motor Manager 2 (MM2) series, engineered for real-time protection, control, and monitoring of industrial motors in motor control centers (MCCs) and panel-mount applications. It integrates process control (10 process inputs, undervoltage autorestart) and enhanced protection (power measurement, thermistor monitoring, 2nd contactor control, 2 process inputs) in a single device, with a 120V AC control voltage for global compatibility. The unit features a full-faceplate LCD display for real-time visualization of phase/ground current, thermal capacity, power, and energy, and supports Modbus RTU communication for SCADA integration.
GE ML2400-F-AC-XX-A6-A4-XX-XX-X
Product Overview
The ML2400-F-AC-XX-A6-A4-XX-XX-X is a fully managed, rugged Ethernet switch from GE Multilin’s MultiLink series, designed for harsh industrial and utility environments, including power substations, manufacturing plants, and critical infrastructure. It features a front-mounted port configuration for easy access, an AC power supply (100–240V AC), and a modular design with A6 (16-port 10/100Base-TX copper) and A4 (8-port 100Base-FX fiber) communication modules. The switch delivers deterministic network performance with IEEE 802.1p QoS, SMART RSTP for fast network recovery, and Link-Loss-Alert for rapid fault detection. It supports IEC 61850 (GOOSE/MMS), Modbus, and DNP3 protocols for seamless integration with SCADA/DCS systems, and offers advanced security features including port security, RADIUS/TACACS+ authentication, and SSH/HTTPS encryption.
GE MIFIIPI55E00HI00
Product Overview
The MIFIIPI55E00HI00 is a microprocessor-based digital feeder protection relay from GE Multilin’s MIF II product line, engineered for comprehensive protection, control, and monitoring of medium-voltage and low-voltage distribution feeders. It delivers primary protection for feeders and backup protection for transformers, busbars, generators, and large motors, integrating overcurrent, earth fault, directional protection, and breaker control functions in a single device. The relay uses a high-speed microprocessor for real-time fault detection, supports multiple communication protocols (IEC 61850, Modbus RTU/TCP, DNP3), and features an LCD interface with a keypad for local configuration and diagnostics.
GE IS420YDOAS1B
Product Overview
The IS420YDOAS1B is a high-reliability discrete output I/O pack developed by General Electric (GE Vernova, Boards & Turbine Control) for Mark VIe and Mark VIeS Speedtronic turbine control systems, designed to provide precise relay-based output control and real-time coil monitoring in industrial automation and turbine control applications. It features 12 individually controllable relay outputs with dedicated coil monitoring, enabling direct interface with process actuators (e.g., solenoid valves, contactors, indicators) while providing feedback for fault detection. The module integrates with Mark VIe IONet architecture for deterministic data transmission, uses a BPPC processor board for fast response, and supports both simplex and TMR (Triple Modular Redundancy) configurations for enhanced availability.
GE IS420UCSBH1A
Product Overview
The IS420UCSBH1A is a high-performance simplex controller module engineered by General Electric (GE Vernova, Boards & Turbine Control) for Mark VIe, Mark VIeS, EX2100e, and LS2100e control systems, designed to execute complex control logic with deterministic response times in industrial automation and turbine control applications. It features a 600 MHz Intel EP80579 processor, 256 MB ECC DDR2 SDRAM, and 2 GB NAND flash, running the QNX Neutrino real-time operating system (RTOS) for reliable, low-latency operation. The controller does not host application I/O directly; instead, it communicates with I/O modules via IONet networks (R, S, T) using IEEE 1588 precision time protocol to synchronize distributed components to within 100 microseconds.
GE IS420PUAAH1A
Product Overview
The IS420PUAAH1A is a high-performance universal I/O pack engineered by General Electric (GE Vernova, Boards & Turbine Control) for seamless integration with Mark VIe and Mark VIeS Speedtronic turbine control systems, designed to deliver flexible, high-precision signal acquisition and control in industrial automation environments. It features 16 individually configurable simplex analog channels, supporting a wide range of signal types including thermocouple, RTD, voltage, 4-20 mA current input, 0-20 mA current output, pulse accumulator, and digital input, eliminating the need for multiple specialized I/O modules and reducing system complexity. The module operates on 5V DC (supplied by Mark VIe controller backplane), integrates with IONet architecture for deterministic data transmission, and is compliant with ControlST software version V07.02.00C or later for configuration and monitoring.
