GE PCH1026CHF861016
Product Introduction
The PCH1026CHF861016 is a high-precision triaxial digital structural vibration monitor engineered by GE Vernova for low-frequency vibration monitoring in wind energy and industrial applications. It integrates three internal accelerometers (X, Y, Z axes) to capture comprehensive structural motion data, supporting up to 4 independent frequency bands per sensor for detailed analysis. The module employs advanced DSP technology and field-proven filtering algorithms to measure RMS, peak, and peak-to-peak values with exceptional accuracy.
GE P110-6052
Product Introduction
The P110-6052 is a high-reliability 24 VDC redundant power supply module designed by GE Vernova for industrial automation and turbine control systems. It delivers a stable 24 VDC output to support critical loads in PACSystems RX3i/RX7i programmable automation controllers and Mark VIe turbine control systems. The module features redundant architecture, enabling seamless switchover between two power inputs to eliminate single points of failure and maximize system availability. It integrates advanced protection mechanisms against overvoltage, overcurrent, short circuits, and over-temperature, ensuring the safety of connected devices and the power supply itself.
GE NE724A
Product Introduction
The NE724A is a high-density, 48 VDC digital input module from GE Vernova, engineered for reliable monitoring of discrete signals in industrial automation and turbine control systems. It features 16 isolated input channels, each with optical isolation to eliminate ground loops and noise interference, ensuring accurate signal acquisition in harsh industrial environments. The module integrates seamlessly with GE’s Mark VIe turbine control systems and PACSystems RX3i/RX7i programmable automation controllers, supporting ToolboxST configuration software for quick setup and diagnostics.
Motorola MVME-6100
Product Introduction
The MVME - 6100 is a high - performance VMEbus single - board computer originally developed by Motorola, now under GE (via Emerson Network Power acquisition). It is the first VMEbus SBC to feature the Tundra Tsi148 interface chip supporting the 2eSST (two edge source synchronous transfer) protocol, which boosts VMEbus practical bandwidth to 320MB/s. Powered by a 1.267 GHz MPC7457 PowerPC processor with a 128 - bit AltiVec parallel processing coprocessor, it delivers robust computing power for real - time data processing and control. It comes with up to 2GB DDR ECC SDRAM, 128MB on - board flash memory, dual Gigabit Ethernet ports, and dual PMC/XMC expansion slots, making it suitable for mission - critical scenarios that demand high reliability, determinism, and scalability.
GE MVAX31S1DE0754A
Product Introduction
The MVAX31S1DE0754A is a dedicated trip circuit supervision relay from GE Grid Solutions (formerly AREVA) designed to continuously monitor the integrity of medium-voltage circuit breaker trip circuits in power systems. It verifies the functionality of trip coils, wiring, and auxiliary contacts under both open and closed breaker states, detecting faults such as open circuits, short circuits, and ground faults in real time. The relay generates alarm and trip block signals upon fault detection to prevent failed breaker operations and enhance system reliability. It integrates with substation automation systems via standard communication protocols, supports seamless integration with existing protection schemes, and operates in harsh industrial environments with robust design and global certifications.
GE MLJ1005B010H00C
Product Introduction
The MLJ1005B010H00C is a high-precision digital synchronism check relay from GE Multilin, designed to ensure safe and reliable synchronization of AC power systems during generator-to-grid or grid-to-grid interconnections. It accurately monitors voltage magnitude, frequency, phase angle, and frequency slip between two AC systems, initiating a closure signal only when all synchronization parameters fall within predefined thresholds. The relay integrates advanced digital signal processing for real-time measurement and control, with flexible configuration options for under/overvoltage supervision, phase angle matching, and frequency slip limits.
GE MIFIIPI55E10HI00
Product Introduction
The MIFIIPI55E10HI00 is a high-performance feeder management relay from GE Multilin’s MiF II series, engineered for protection, control, monitoring, and diagnostics of medium-voltage feeders in power distribution systems. It combines comprehensive protection functions, precise measurement capabilities, and flexible communication protocols to ensure reliable operation of distribution networks. The relay supports IEC 61850, Modbus RTU, and Profibus DP for seamless integration with SCADA and substation automation systems, and includes advanced features such as auto reclose, fault location, load shedding, and event recording for enhanced network management.
ELAU MC-4/11/22/400
Product Introduction
The MC-41122400 is a high-performance PACDrive servo controller originally designed by ELAU (acquired by Schneider Electric, integrated into GE industrial automation portfolios) for precision motion control in industrial applications. It functions as a multi-axis motion controller and servo drive interface, supporting 1–32 control axes with flexible control modes (position, speed, torque, velocity). The module integrates with PACDrive servo motors and industrial networks, delivering deterministic motion control for high-speed packaging, printing, and converting machinery. It features a compact, rugged design with conformal coating, supporting 380–480 V AC input (48/62 Hz) and communication via CANopen, Ethernet, Modbus, Profibus, and SERCOS protocols.
GE M2X-O1-S1-A1-B0-C0-D1-P2-G0-VC0-V0-E0-M0-L2
Product Introduction
The M2X‑O1‑S1‑A1‑B0‑C0‑D1‑P2‑G0‑VC0‑V0‑E0‑M0‑L2 is a high‑performance DGA and moisture monitoring unit designed by GE Vernova for utility and industrial power transformers, serving as a critical component for asset health management. It integrates a single composite gas sensor (measuring H₂, CO, C₂H₂, C₂H₄) and a built‑in moisture sensor to continuously track dissolved fault gases and water content in transformer oil, with readings displayed in %RH and ppm. The unit features a compact, rugged enclosure with no moving parts, reducing maintenance requirements and extending operational lifespan.
GE IS420UCSBH4A
Product Introduction
The IS420UCSBH4A is a high-performance UCSB controller module designed by General Electric for Mark VIe, EX2100e, and LS2100e control systems, serving as the core processing unit for industrial automation and turbine control applications. It is powered by a 1066 MHz Intel EP80579 processor running the QNX Neutrino real-time operating system, delivering deterministic control with microsecond-level task scheduling for critical turbine operations. The module features a compact, rugged design with conformal coating, dual redundant 24 V DC power inputs, and seamless integration with Mark VIe I/O modules via IONet.
GE IS420TBCIS2C
Product Introduction
The IS420TBCIS2C is a high-reliability discrete input terminal board engineered by General Electric for the Mark VIeS Speedtronic Control System, serving as the interface between field wiring and Mark VIeS I/O modules. It provides 32 channels of isolated contact input termination, each with built-in surge suppression and high-frequency noise filtering to ensure accurate signal acquisition in harsh industrial environments. The board features two terminal blocks (TB1 and TB2) for secure field connection, and integrates seamlessly with Mark VIeS I/O modules (e.g., IS420TBCH1A) to deliver precise discrete input data for turbine control, safety interlocks, and monitoring functions.
GE IS420ESWBH2A
Product Introduction
The IS420ESWBH2A is a rugged, unmanaged Industrial Ethernet Switch (IONet Switch) developed by General Electric for seamless integration with Mark VIe and Mark VIeS Speedtronic Control Systems. It functions as a core communication hub, offering 16 copper ports and 2 fiber ports to connect controllers, I/O modules, operator interfaces, and auxiliary devices within industrial control networks. The switch uses a store‑and‑forward architecture with a 4K MAC address table and 256 KB buffer memory to ensure deterministic IONet data transfer, critical for real‑time turbine control and safety interlocks. It supports dual redundant 24 V DC power inputs and features conformal coating to withstand harsh industrial environments with extreme temperatures, dust, moisture, and electromagnetic interference.
