NI PXIe-1082

Technical Specifications: Total Slots: 8 slots, including 4 hybrid slots, 2 PXIe slots, 1 PXIe system timing slot System Bandwidth: Up to 8 GB/s Power Output: +3.3 V 32 A, +5 V 27 A, +12 V 32 A, -12 V 2 A Per Slot Cooling Power Budget: 38 W AC Input: 100 VAC to 240 VAC, 50 / 60 Hz Reference Clock: 10 MHz BNC IN/OUT

Function Features: Hybrid backplane accepts both PXIe modules and legacy PXI hybrid compatible modules. Modular removable power supply and fan unit. Remote power inhibit and monitoring via rear DB9 connector. System voltage, temperature and fan speed monitoring. Built-in 10 MHz reference clock for multi-module synchronization.

Application Scenarios: Mixed PXI/PXIe automated test system, aerospace validation, semiconductor test, electronic product functional test, portable high-performance measurement system.

Material Composition: Chassis housing: steel sheet metal. Front and rear panel: aluminum alloy. Backplane: multi-layer high-speed PCB. Power module: switch-mode power supply unit.

Structural Features: 3U rack-mount enclosure. Modular power shuttle. Rear panel with BNC clock port, DB9 remote control and AC inlet. Internal forced air cooling fans. PXI/PXIe high-speed backplane.

Working Principle: Backplane provides PCI Express bus, PXI trigger bus, timing clock and power distribution to each slot. Power supply converts AC input to regulated DC rails for modules. Fans push airflow through module slots for thermal dissipation. 10 MHz reference clock distributes synchronous timing signal across all slots.

Installation Requirements: Mount on standard 19 inch equipment rack. Connect AC power. Install PXI/PXIe modules into slots. Connect external 10 MHz reference if required.

Usage Notes: Do not exceed total power consumption sum of all installed modules. Maintain front and rear ventilation clearance. Replace fan/power shuttle if fan fault reported. Use proper rack grounding.