Hilscher NT100-RE-DP - Image 1
Hilscher NT100-RE-DP - Image 2
Click to enlarge
Hilscher NT100-RE-DP
Hilscher NT100-RE-DP - Image 2
CONSILIUM NSAC-1
CONSILIUM NSAC-1
Back to products
FOXBORO FBM242 P0101AG
FOXBORO FBM242 P0101AG

Hilscher NT100-RE-DP

Product Name:​ netTAP 100 Gateway – Real-Time Ethernet to PROFIBUS-DP
Product Introduction:
DIN-rail protocol converter bridging one real-time Ethernet side (2-port switch) to one PROFIBUS-DP slave/master side. Firmware loaded via SD/MMC defines which RTE protocol is active (EtherCAT, PROFINET IO, EtherNet/IP, Modbus TCP, Sercos III).
Category:
Description
Technical Specifications:
  • Controller:​ Hilscher netX 100
  • Memory:​ 8 MB SDRAM, 4 MB serial flash, SD/MMC up to 2 GB
  • RTE side:​ 2 × RJ45, 10/100 BASE-TX, electrically isolated
  • PB side:​ 9-pin D-Sub RS-485, optical isolation
  • PB capacity:​ Master up to 125 slaves; slave mode supported
  • Conversion time:​ < 10 ms typical
  • Supply:​ 24 V DC ±6 V, 130 mA, 3.2 W, reverse-polarity protected
  • Service:​ Mini-USB diagnostic, rotary node-address switches
  • LEDs:​ SYS, APL, LINK, ACT, COM (dual color)
  • Temp:​ 0–60 °C, non-condensing, pollution degree 2
Features:​ Swappable SD card holds firmware+config for seconds-swap replacement, SYCON.net engineering, multi-RTE license selectable.
Applications:​ Retrofit PROFIBUS-DP drives into EtherCAT cell, PROFINET controller talking to legacy DP valve manifold, Modbus TCP SCADA to DP instruments.
Installation Notes:​ DIN rail only; 24 V isolated source for UL; set node address before power; terminate PROFIBUS with 120 Ω at ends; do not mix RTE firmware without SD reload.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Hilscher NT100-RE-DP”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

AMAT 0100-71267 Semiconductor Control Module

echnical Specifications:
  • Compatibility: Designed specifically for integration with Applied Materials' semiconductor processing systems.
  • Electrical Characteristics: Details about voltage requirements, current ratings, and power consumption would be specified in technical documentation tailored to its specific application within the system.
  • Physical Attributes: Dimensions and weight suitable for installation within semiconductor manufacturing equipment, ensuring compatibility with existing hardware and facilitating ease of replacement or maintenance.
  • Environmental Tolerance: Engineered to withstand the demanding conditions inside semiconductor fabrication facilities, including resistance to electromagnetic interference, temperature variations, and particulate matter.
Read more
Quick view

BENDER IRDH575B1W-435

Technical Specifications:
    • Rated Voltage: Up to 690 V AC, 24–300 V DC
    • Measuring Range: 0 to 999 kΩ (depending on voltage level)
    • Response Time: Rapid detection time for insulation faults
    • Operating Temperature: -10°C to +60°C
    • Storage Temperature: -25°C to +70°C
    • Humidity Range: 0% to 95% relative humidity, non-condensing
    • Communication Interfaces: RS-485, Modbus RTU, Ethernet interface for network integration
    • Display: LCD display for status indication and parameter setting
Read more
Quick view

CCC IOC-555-D 17-550555-001 Simplex I/O Card / Communication Control Board

Technical Specifications:
  • The module offers 16 serial input/output channels.
  • It integrates a processor, memory, and I/O interfaces into a compact form factor suitable for embedded systems.
  • It supports high computing performance with low power consumption characteristics.
  • Storage options include flash memory and RAM for storing the operating system, applications, and data.
Read more
Quick view

CUTLER HAMMER JD3250F – Industrial Molded Case Circuit Breaker Frame

Technical Specifications • Voltage Ratings: 600 VAC, 250 VDC • Current Rating: 250 A (frame only; trip unit ordered separately) • Poles: 3 • Interrupting Capacity: 65 kA @ 240 VAC / 35 kA @ 480 VAC / 25 kA @ 600 VAC • Trip Functions: LI (Long-Time & Instantaneous) via field-installable trip units • Mounting: Bolt-on or plug-on; suitable for reverse feed • Standards: UL 489, CSA, IEC 60947-2 • Dimensions: 4.13" × 10" × 4.06" (H×W×D) • Weight: ~3.5 kg (frame only)
Read more
Quick view

DEIF DLQ144-PC-NB

Technical Specifications:

  • Supply Voltage: 24 V DC (standard industrial voltage)
  • Power Consumption: Low consumption suitable for energy-efficient applications
  • Operating Temperature: -25°C to +70°C, ensuring performance in diverse environments
  • Storage Temperature: -40°C to +85°C
  • Humidity Range: 5% to 95% relative humidity, non-condensing
  • Communication Protocols: Supports Modbus RTU, Modbus TCP, and other standard protocols for integration with SCADA systems
  • Dimensions (WxHxD): Compact design suitable for mounting in switchgear cabinets or control panels
  • Certifications: CE, UL, and other relevant industry standards
Read more
Quick view

KONGSBERG MRU-E-JB3

Technical Specifications:
  • Measurement Axes: 6 DOF (Degrees of Freedom) - heave, surge, sway, roll, pitch, and yaw
  • Accuracy: High accuracy across all axes with minimal latency
  • Update Rate: Configurable up to 100 Hz for real-time applications
  • Operating Voltage: Typically 12 to 36 VDC
  • Power Consumption: Low power consumption suitable for extended operation
  • Operating Temperature: -40°C to +70°C, ensuring performance in extreme environments
  • Storage Temperature: -50°C to +85°C
  • Humidity Range: 0% to 100% relative humidity, waterproof design
  • Environmental Protection: IP68 rated for underwater use and protection against dust and water ingress
  • Communication Interfaces: RS-232, RS-422, Ethernet, NMEA 0183, and others depending on configuration
Read more
Quick view

MOLEX SST-PFB-SLC

Product Introduction

The MOLEX SST-PFB-SLC is a Profibus scanner module designed for use with the Allen-Bradley SLC 500 controller series. It is manufactured by SST, a brand under Molex. The module enables communication between an SLC processor (SLC 5/03 or later) and DP remote I/O devices on a Profibus network, acting as a Profibus DP remote I/O scanner.
Read more
Quick view

Monico CDL-MCLE-FWM

Technical Specifications
  • Input Protocol: Caterpillar® CDL (Cat Data Link).
  • Output Protocols: Supports Modbus (RTU/TCP), CANopen, and other industrial protocols via configurable modules.
  • Data Polling Rate: High-speed, multi-threaded polling at 20–60 parameters per second for real-time monitoring.
  • Pre-configured Registers: Over 400 CDL-based registers for rapid deployment, with customizable mapping for specific applications.
Read more
Quick view