Yokogawa PSCCM22AAN - Image 1
Yokogawa PSCCM22AAN - Image 2
Yokogawa PSCCM22AAN - Image 3
Click to enlarge
Yokogawa PSCCM22AAN
Yokogawa PSCCM22AAN - Image 2
Yokogawa PSCCM22AAN - Image 3
NI PXIe-8133
NI PXIe-8133
Back to products
Phoenix Contact PSR-SPP-24UC/URM4/5X1/2X2/B
Phoenix Contact PSR-SPP-24UC/URM4/5X1/2X2/B

Yokogawa PSCCM22AAN

Product Introduction:
The PSCCM22AAN is a specialized control/module assembly belonging to Yokogawa’s distributed control system (DCS) accessory family. It is commonly deployed inside CENTUM VP or CS 3000 rack infrastructure as a processor support, communication coupler, or system timing module depending on the installed firmware and baseplate.
Category:
Description
Technical Specifications:
  • Manufacturer:​ Yokogawa Electric Corporation
  • Series:​ CENTUM/CS module family
  • Mounting:​ Backplane slot mount (FCU or Node Unit)
  • Operating Temp:​ -10 °C to +55 °C
  • Storage Temp:​ -20 °C to +70 °C
  • Humidity:​ 5% to 95% RH non-condensing
  • Power Source:​ Derived from rack power supply (no standalone AC input)
  • Isolation:​ Galvanic isolation between field and system side
Functional Features:
  • Designed for high-reliability process control environments
  • Hot-swappable in redundant configurations
  • Status LEDs for run, error, and communication
  • Compatible with Yokogawa FIO and ESB bus architecture
Application Scenarios:
  • Oil & gas refining DCS cabinets
  • Petrochemical process control
  • Power plant turbine auxiliary control
  • Continuous process automation lines
Installation Requirements:
  • Install only in designated Yokogawa baseplate slot
  • Ensure proper earth grounding of the cabinet
  • Do not mix with incompatible firmware nodes
Usage Notes:
  • Verify node address before insertion
  • Avoid static discharge during handling
  • Replace under de-energized condition unless redundant pair is active
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Yokogawa PSCCM22AAN”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Yokogawa ADV551-P60

ADV551-P60 is a core discrete digital output module under Yokogawa Centum VP distributed control system platform, serving as electrical interface between DCS field control unit (FCU) and field 24 V DC solenoid valves, relay contactors, indicator lamps and digital actuators. It converts DCS internal logic control commands into isolated transistor sink digital switch signals, providing high-density multi-channel on-site digital driving capacity for process safety interlock and sequence control loops in chemical, power and petrochemical plants.
Read more
Quick view

Yokogawa ADV569-P00

ADV569-P00 is a supplementary high-reliability digital output expansion module designed for Yokogawa Centum VP distributed control system, matched with ADV551 series main output modules to expand multi-group isolated digital driving capacity for auxiliary process equipment, auxiliary alarm indicators and low-power switching actuators. It adopts compact rack plug-in structure, inheriting full electrical isolation and channel fault diagnosis technology of ADV series, dedicated for secondary non-safety critical digital control loops in medium and small-scale industrial process plants.
Read more
Quick view

YOKOGAWA AFV10D-S41101

Technical Specifications
  • Model: AFV10D-S41101
  • Type: Rack-mounted electronic control device (input/output module)
  • Measurement Accuracy: 0.1% (specific range and resolution depend on application scenarios)
  • Power Supply: Typically 1.5V DC (may vary by batch or customization)
  • Working Voltage: Supports 220V AC or 24V DC, depending on configuration
  • Environmental Adaptability:
    • Operating Temperature: -30°C to +70°C
    • Protection Rating: IP65 (dustproof and water-resistant)
Read more
Quick view

Yokogawa AFV30D-A41252

  • Power Supply: Supports dual - redundant power supply, compatible with 100 - 120V AC, 220 - 240V AC, and 24V DC.
  • Memory Protection: The main memory battery backup time can be up to 72 hours during power failure, and the charging time is at least 48 hours.
  • Communication Interface: Supports the Vnet/IP communication protocol. An optional HKU interface can be used to output FCU fault contact points, monitor the cabinet environmental conditions, and display the HKU operating status.
  • Node Unit Connection Number: Can connect up to 13 ESB bus node units (ANB10S) and optical ESB bus node units (ANB11S).
  • Dimensions: 19 - inch rack - mount type.
  • Output Power: For 100 - 120V AC, it is 200 VA; for 220 - 240V AC, it is 230 VA; for 24V DC, it is 5.5 A.
Read more
Quick view

Yokogawa CP451-10 – Processor Module

Technical Specifications:

  • Interface Module: Designed to facilitate communication between different components of the DCS.
  • Communication Protocols: Supports standard industrial protocols ensuring compatibility across multiple devices and systems.
  • Power Supply: Operates on a specific voltage range suitable for industrial environments.
  • Environmental Conditions: Rated for operation in a range of temperatures and humidity levels typical for industrial settings.
Read more
Quick view

YOKOGAWA CP451-51 Multifunction Processor Module

Procurement Guidance

  1. Compatibility Notes
    • Valid for CENTUM CS3000/VPS and AFV300/AFV400 systems; replaces legacy CP451-11 (#ref_11).
    • Suffix -51 denotes standard non-explosion-proof variant; confirm ISA G3 compliance for corrosive environments (#ref_11).
  2. Critical Accessories
    • Backplane Adapter (e.g., Yokogawa SDCS-PIN-24) for DCS rack integration (#ref_5).
    • Battery Backup Module (IC698ACC701) for RAM retention during power loss (#ref_8).
  3. Avoid Mismatches
    • Standalone HART isolators → Use Yokogawa CP451-HART.
    • Low-power I/O modules → Refer to Yokogawa AFL111.
  4. Authenticity Verification
    • Holographic seals on factory-sealed units; 12-month warranty (#ref_3).
    • Cross-check part number 3BHE030579R0003 for industrial-grade variants (#ref_14).
Read more
Quick view

YOKOGAWA CP461-50 Processor Module – Comprehensive Data Sheet

Technical Specifications:
  • Communication Protocols: Supports multiple industry-standard communication protocols such as Ethernet/IP, Modbus/TCP, and proprietary Yokogawa protocols, enabling connectivity with a wide range of devices and systems.
  • Network Interface: Features interfaces for both wired and wireless networks, accommodating diverse network architectures and facilitating flexible system configurations.
  • Data Processing Capability: Equipped with sufficient processing power to handle large volumes of data efficiently, ensuring timely and accurate data transmission.
  • Environmental Tolerance: Designed to operate reliably in harsh industrial environments, featuring resistance to dust, moisture, temperature extremes, and electromagnetic interference.
  • Power Supply: Operates on standard industrial power supply voltages with options for redundancy to ensure continuous operation in critical applications.
Read more
Quick view

Yokogawa KS1-10-B

Product Name:​ Yokogawa RAMC / Rotameter Intrinsically Safe Limit Switch Option — KS1-10-B (Ex ia IIC T6)
Product Brief:​
The KS1-10-B is an intrinsically safe reed-switch type limit (alarm) contact assembly designed for mounting on Yokogawa area-type variable area flowmeters / rotameters (RAMC series). It provides a dry contact closure when the float reaches a preset position, suitable for hazardous area (Zone 0/1/2) signaling.
Read more
Quick view