Magnetek HP4-1D-T-S1139 - Image 1
Magnetek HP4-1D-T-S1139 - Image 2
Click to enlarge
Magnetek HP4-1D-T-S1139
Magnetek HP4-1D-T-S1139 - Image 2
Baumer HOG10DN1024I
Baumer HOG10DN1024I
Back to products
ASEM HT2150/S0
ASEM HT2150/S0

Magnetek HP4-1D-T-S1139

  • Product Name: Magnetek HP4 Series Radio Remote Control Receiver / Controller
  • Product Introduction: Part of Magnetek’s industrial radio control systems, typically a receiver unit or specific drive interface module used for wireless control of cranes, hoists, and industrial machinery. The “HP4-1D-T-S1139” identifies the enclosure type, frequency band, and configuration.
Category:
Description
  • Technical Specifications:
    • Supply Voltage: Often 120VAC or 12/24VDC depending on HP4 variant (check nameplate; common industrial is 120/230VAC or 18-30VDC).
    • Output Type: Relay or solid-state contacts for machine control.
    • Frequency: 2.4 GHz spread spectrum or 900 MHz (licensed free bands).
    • Safety: Compliance with EN ISO 13849-1 (PLd) and SIL 3 architectures in full system context.
  • Functional Features:
    • Diagnostics via LED indicators on receiver.
    • Multiple function buttons supported from handheld/bellybox transmitters.
    • Hibernation/wake-up logic to save battery.
    • Unique system ID to prevent cross-talk.
  • Application Scenarios: Overhead cranes, gantry cranes, monorails, conveyor systems, material handling.
  • Structural Features:
    • Enclosure: NEMA 4/12 (indoor) or NEMA 4X (outdoor) polycarbonate or metal.
    • Antenna: External omnidirectional or internal.
    • Connections: Screw terminals for power, outputs, and emergency stop loops.
  • Usage Notes: Antenna must not be coiled or obstructed by metal; perform range test before operation; ensure emergency stop function is tested daily; keep receiver away from high RF noise sources (welders, VFDs).
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Magnetek HP4-1D-T-S1139”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Amat 0010-44213

  • Precision Performance: Engineered for high-precision control, the AMAT 0010-44213 meets the stringent requirements of semiconductor manufacturing.
  • Environmental Resistance: Operates reliably in high-temperature and high-pressure environments, withstanding harsh industrial conditions.
  • Compatibility: Seamlessly integrates with various semiconductor devices, lithography machines, plasma etching equipment, and other advanced material processing technologies.
  • Interface and Control: Effectively interfaces with AMAT’s equipment modules and control systems, ensuring collaborative operation across the entire production line.
Read more
Quick view

CONTROL 9180B-8

  • Power Supply: Supports AC 220V/50Hz or DC 24V, depending on design requirements.
  • Communication Interfaces: Equipped with RS-485, Ethernet, and Modbus protocols for seamless integration with other devices or systems.
  • Processor: High-performance CPU ensures rapid response and accurate control.
  • Protection Rating: IP65 or higher for dust and water resistance, suitable for harsh industrial conditions.
  • Operating Temperature: Wide temperature range to adapt to diverse industrial settings.
Read more
Quick view

KEBA FB201 — Comprehensive Data Sheet

Procurement Guidance

  1. Compatibility Notes
    • Verify suffix codes (e.g., FB201/xxx) for I/O capacity and environmental ratings .
    • Requires KEBA RobotStudio or ECL-3 software for configuration .
  2. Critical Accessories
    • Backplane Adapter (e.g., SDCS-PIN-24) for PLC integration .
    • IP65 Housing for harsh environments (e.g., oil rigs, substations) .
  3. Avoid Mismatches
    • Servo drives → Refer to KEBA KeDrive.
    • HMIs → Use KEBA ETT Series.
Read more
Quick view

KONGSBERG MRU-E-JB3

Technical Specifications:
  • Measurement Axes: 6 DOF (Degrees of Freedom) - heave, surge, sway, roll, pitch, and yaw
  • Accuracy: High accuracy across all axes with minimal latency
  • Update Rate: Configurable up to 100 Hz for real-time applications
  • Operating Voltage: Typically 12 to 36 VDC
  • Power Consumption: Low power consumption suitable for extended operation
  • Operating Temperature: -40°C to +70°C, ensuring performance in extreme environments
  • Storage Temperature: -50°C to +85°C
  • Humidity Range: 0% to 100% relative humidity, waterproof design
  • Environmental Protection: IP68 rated for underwater use and protection against dust and water ingress
  • Communication Interfaces: RS-232, RS-422, Ethernet, NMEA 0183, and others depending on configuration
Read more
Quick view

Monico CDL-MCLE-FWM

Technical Specifications
  • Input Protocol: Caterpillar® CDL (Cat Data Link).
  • Output Protocols: Supports Modbus (RTU/TCP), CANopen, and other industrial protocols via configurable modules.
  • Data Polling Rate: High-speed, multi-threaded polling at 20–60 parameters per second for real-time monitoring.
  • Pre-configured Registers: Over 400 CDL-based registers for rapid deployment, with customizable mapping for specific applications.
Read more
Quick view

Motorola IPMC761-002

  • Processor: Equipped with an MPC7450 series PowerPC processor at 1 GHz, with 512 KB of on - chip L2 cache and 2 MB of L3 cache, and an Altivec coprocessor for high - performance computational applications.
  • Memory: Two banks of soldered flash memory.
  • Communication Interfaces: Includes 1 parallel port, 2 asynchronous serial ports, and 2 synchronous/asynchronous serial ports.
  • Bus Type: VME bus.
  • Power Supply: Draws +5 V and +3.3 V through the PMC connectors.
  • Dimensions: 263 × 58 × 28 mm.
  • Weight: 4.3 kg.
Read more
Quick view

ONLINE DEVELOPMENT 56SAM-810

Technical Specifications:
  • Processor: Equipped with a high-performance microprocessor tailored for real-time processing tasks, ensuring efficient operation in demanding environments.
  • Memory: Includes both RAM and flash memory options to facilitate program execution and data storage. The exact size can vary but is typically sufficient for storing application-specific software and temporary data.
  • Communication Interfaces: Supports multiple communication protocols, including serial interfaces (RS-232/485), Ethernet, and possibly fieldbus options like CAN or Modbus, facilitating connectivity with other devices and systems.
  • Input/Output Capabilities: Designed to interface with various sensors, actuators, and control systems through configurable digital and analog input/output channels.
Read more
Quick view

Yaskawa CACR-SR07BE12M

  • Input Voltage: Three - phase AC 200V - 230V
  • Output Current: 7A
  • Output Power: 1.5kW or 0.75kW
  • Control Method: Vector control
  • Communication Interface: RS - 485
  • Protection Level: IP20
  • Output Frequency Range: 0.1 - 400Hz
  • Overload Capacity: 150% of the rated current for 60 seconds
  • Dimensions: 150mm * 240mm * 350mm
  • Weight: Approximately 1.14kg
Read more
Quick view