LYNGSO MARINE IOM402 - Image 1
LYNGSO MARINE IOM402 - Image 2
Click to enlarge
LYNGSO MARINE IOM402
LYNGSO MARINE IOM402 - Image 2
Alcatel-Lucent IOM2-20G
Alcatel-Lucent IOM2-20G
Back to products
Vibro-Meter IPC704 244-704-000-042
Vibro-Meter IPC704 244-704-000-042

LYNGSO MARINE IOM402

  • Product Name: Marine Automation I/O Module (Input-Output Module 402)
  • Product Introduction: An interface module for Lyngso Marine (Wärtsilä/SAM Electronics) MCS 2200 or HDC marine automation systems, linking field sensors to the central controller.
Category:
Description
  • Technical Specifications & Performance Parameters:
    • Supply Voltage: 24 VDC (marine tolerance).
    • Digital Inputs: Typically 16 channels (dry/wet contact).
    • Analog Inputs: 8 channels (4-20mA, 0-10V, PT100).
    • Digital Outputs: 8 relay or transistor outputs.
    • Resolution: 12-bit ADC for analog channels.
  • Functional Features:
    • Galvanic Isolation: Protects backplane from field-side surges.
    • Configurable Scaling: Software-configurable engineering units for analog inputs.
    • Bus Communication: Proprietary Marine Serial Bus or RS-485 to main CPU rack.
  • Application Scenarios: Ship engine control (ECS), ballast/bilge management, steering gear (Tenfjord) control, alarm monitoring systems (AMS).
  • Material & Structural Features: Eurocard format PCB, marine-grade conformal coating against salt mist/humidity, DIN-rail or 19″ subrack mountable.
  • Working Principle: Scans input terminals at high frequency, converts analog signals to digital words, transmits data via backplane bus to the main controller; receives output commands from controller to drive actuators/valves.
  • Installation Requirements: Install in ventilated cabinet; ensure node ID DIP switches match system configuration before insertion.
  • Usage Notes: Must switch connected systems to “Manual” before hot-swapping to prevent spurious trips. Inspect for verdigris (corrosion) on pins in salty environments.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “LYNGSO MARINE IOM402”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

CCC TIOC-555HD

Technical Specifications

There is currently no specific and detailed technical specification information available for the CCC TIOC - 555HD. However, based on similar products such as the CCC IOC - 555 - D, it may have the following characteristics:
  • Communication Interface: May support RS - 485 communication.
  • I/O Channels: It is possible to have multiple digital inputs and outputs, as well as analog inputs and outputs. For example, the IOC - 555 - D has 8 digital inputs, 4 digital outputs, 2 analog inputs, and 2 analog outputs.
Read more
Quick view

Fireye 45UV5-1101

Technical Specifications:
  • Detection Type: Ultraviolet (UV)
  • Sensing Distance: Effective sensing distance up to several meters, depending on flame size and intensity
  • Operating Voltage: Typically operates on 24 VDC
  • Power Consumption: Low power consumption suitable for energy-efficient applications
  • Operating Temperature: -40°C to +70°C, ensuring performance in extreme environments
  • Storage Temperature: -40°C to +85°C
  • Humidity Range: 0% to 95% relative humidity, non-condensing
Read more
Quick view

KEBA FB201 — Comprehensive Data Sheet

Procurement Guidance

  1. Compatibility Notes
    • Verify suffix codes (e.g., FB201/xxx) for I/O capacity and environmental ratings .
    • Requires KEBA RobotStudio or ECL-3 software for configuration .
  2. Critical Accessories
    • Backplane Adapter (e.g., SDCS-PIN-24) for PLC integration .
    • IP65 Housing for harsh environments (e.g., oil rigs, substations) .
  3. Avoid Mismatches
    • Servo drives → Refer to KEBA KeDrive.
    • HMIs → Use KEBA ETT Series.
Read more
Quick view

KUKA KSD1-08 Servo Drive Module – Complete Technical Profile

Technical Specifications:
  • The KSD1-08 is part of a series of drive systems tailored for dynamic and efficient operation of robotic arms and similar machinery.
  • It supports various communication protocols essential for integration within complex automation systems.
  • Capable of handling significant power loads while maintaining high efficiency and minimal heat generation, ensuring reliable performance over extended periods.
Read more
Quick view

Monico CDL-MCLE-FWM

Technical Specifications
  • Input Protocol: Caterpillar® CDL (Cat Data Link).
  • Output Protocols: Supports Modbus (RTU/TCP), CANopen, and other industrial protocols via configurable modules.
  • Data Polling Rate: High-speed, multi-threaded polling at 20–60 parameters per second for real-time monitoring.
  • Pre-configured Registers: Over 400 CDL-based registers for rapid deployment, with customizable mapping for specific applications.
Read more
Quick view

ONLINE DEVELOPMENT 56SAM-810

Technical Specifications:
  • Processor: Equipped with a high-performance microprocessor tailored for real-time processing tasks, ensuring efficient operation in demanding environments.
  • Memory: Includes both RAM and flash memory options to facilitate program execution and data storage. The exact size can vary but is typically sufficient for storing application-specific software and temporary data.
  • Communication Interfaces: Supports multiple communication protocols, including serial interfaces (RS-232/485), Ethernet, and possibly fieldbus options like CAN or Modbus, facilitating connectivity with other devices and systems.
  • Input/Output Capabilities: Designed to interface with various sensors, actuators, and control systems through configurable digital and analog input/output channels.
Read more
Quick view

SAACKE FSC-01

Technical Specifications:
  • Supply Voltage: 24 V DC (typical), with options for 110–230 V AC in certain configurations
  • Power Consumption: Low power draw, optimized for continuous operation
  • Operating Temperature: -10°C to +55°C
  • Storage Temperature: -25°C to +70°C
  • Humidity Range: 5% to 95% relative humidity, non-condensing
  • Protection Rating: IP20 (suitable for indoor panel mounting)
  • Input Compatibility: Accepts signals from flame detectors including UV, IR, and ionization sensors
  • Output Relays: Equipped with safety-rated relay outputs for burner activation, alarm signaling, and system shutdown
Read more
Quick view

TOSHIBA GBU648E-S

  • Slot Capacity: Supports up to 8 modules, allowing flexible configuration with TOSHIBA’s EX10 series components (e.g., power supplies, CPUs, I/O units).
  • Power Supply Compatibility: Works with modules like PS261 (power supply) and PU11A (CPU), ensuring stable energy distribution and control logic execution.
  • Communication Modules: Integrates with Profibus DP modules (e.g., GPF611-S) for seamless connectivity with field devices, enabling real-time data exchange in industrial networks.
  • Analog/Digital Modules: Compatible with GAD668-S (analog input) and GDA664-S (analog output) modules, supporting high-precision signal processing for sensors and actuators.
  • Physical Design: Compact, rack-mounted structure optimized for space efficiency in control panels.
Read more
Quick view