Sanyo Denki P30B04010DXS8FM

Product Name: Sanyo Denki SANMOTION BL Super P3 Series AC Servo Motor — P30B04010DXS8FM

Manufacturer: Sanyo Denki Co., Ltd.

Product Category: Small-frame 3-phase brushless AC servo motor with 20-bit incremental encoder

Category: Others

Description

Brief Introduction:

The P30B04010DXS8FM is a 40 mm flange (NEMA 17/23-class) BL Super P3 servo motor rated approx. 100 W, equipped with a high-resolution incremental encoder (131,072 ppr typical for P3 series), suitable for precision positioning in semiconductor, electronics assembly, and small machine tool axes.

Technical Specifications (based on P30B04010 family):

Model Breakdown: P30 = BL P3 series, B = Brake option (check — DXS8FM suffix typically means no brake / specific connector & encoder), Frame 040 = 40 mm sq. (≈NEMA 17), 10 = winding/torque variant
Rated Output Power: 100 W (0.1 kW)
Rated Speed: 3000 rpm
Maximum Speed: 4500–5000 rpm
Rated Torque (Continuous): 0.32 N·m (3.25 kg·cm)
Continuous Stall Torque: 0.353 N·m
Peak Torque: ~0.98 N·m (instantaneous)
Rated Current: 1.1 Arms
Stall Current: 1.3 Arms
Torque Constant (Kt): 0.292 N·m/A
Back-EMF Constant (Ke): 10.2 mV/min⁻¹ (10.2 V/krpm)
Phase Resistance: 4.3 Ω (line-to-line @ 20°C)
Rotor Inertia: 0.051 × 10⁻⁴ kg·m² (with INC encoder)
Encoder: Incremental 20-bit (524,288 counts/rev quadrature = 131,072 ppr × 4) — “S8FM” denotes high-res encoder & specific lead/connector configuration
Brake: Typically none on “DXS8FM”; “-B” in model would indicate 24 VDC spring-applied holding brake
Shaft: 6 mm diameter with keyway; shaft seal standard
Winding Insulation Class: Class B (130°C) or F (155°C)
Ingress Protection: IP65 (with shaft seal), except connector/breather vent area
Ambient Operating Temp: 0 to +40°C (derate above 40°C)
Mass: ~0.5 kg (motor only); ~0.83 kg with brake/encoder option
Connection: Dedicated Sanyo Denki servo drive mating connector (signal + power)
Certifications: CE, UL recognized component, RoHS compliant

Features:

Low cogging torque due to skewed magnet arrangement
Neodymium iron boron (NdFeB) permanent magnets
Compatible with Sanyo Denki SANMOTION R series (SERVOPACK) digital amplifiers
High-resolution encoder enables sub-micron positioning in closed-loop

Applications:

Semiconductor wafer handling, pick-and-place heads, optical inspection stages, small XY tables, medical analyzers, electronic component insertion machines.

Installation Notes:

Use Sanyo Denki-recommended shielded cable sets; separate power and encoder/feedback cables by ≥10 cm or use metallic conduit
Ground motor frame to machine earth; connect shield drain wire only at drive end
Do not apply radial load exceeding specification at shaft end; use flexible couplings for misalignment
If brake-equipped variant is used, brake releases at 24 VDC — verify safety before disabling

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Sanyo Denki P30B04010DXS8FM”

Shipping and Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.