Alstom ICP232 029.359325 - Image 1
Alstom ICP232 029.359325 - Image 2
Alstom ICP232 029.359325 - Image 3
Click to enlarge
Alstom ICP232 029.359325
Alstom ICP232 029.359325 - Image 2
Alstom ICP232 029.359325 - Image 3
ProSoft Technology ILX34-MBS485
ProSoft Technology ILX34-MBS485
Back to products
Vibro-Meter IOC4T 200-560-000-016
Vibro-Meter IOC4T 200-560-000-016

Alstom ICP232 029.359325

Product Name:​ ICP232 VME-based Control & Communication Interface Module (Controller Motherboard)
Product Introduction:​ Industrial controller board with integrated VME bus, Ethernet, CAN bus, and serial ports; serves as the central processing and communication node in Alstom/Converteam drive systems, wind turbine pitch controls, and power conversion equipment.
Category:
Description
Technical Specifications:
  • Supply Voltage:​ +5 VDC / +15 VDC / +24 VDC (backplane-powered per system)
  • Processor:​ 32-bit embedded processor (~225 MHz, ARM/PowerPC variant per version)
  • Communication Interfaces:​ VMEbus (primary backplane), 10/100 Mbps Ethernet, CAN bus (CANopen option), RS-232/RS-485 (debug/local), ICP232 proprietary serial
  • Local I/O:​ Typically 8 × Digital Inputs, 4 × Digital Outputs (on associated I/O daughtercards)
  • Protocol Support:​ Modbus TCP/RTU, CANopen (CiA DS402), Profibus-DP (with option card), Alstom proprietary ICP protocol
  • Watchdog:​ Hardware watchdog with safety-action on communication loss (e.g., emergency pitch in wind turbines)
  • Isolation:​ ≥ 2.5 kV AC on communication ports
  • Operating Temp:​ -20 °C to +60/70 °C (conformal coated versions for wind applications -40 °C to +70 °C)
  • Mechanical:​ Eurocard PCB form factor (approx. 267 × 191 mm), plugs into Alstom cabinet backplane with locking handle
  • Weight:​ ~0.39 kg
    Key Features:​ Multi-protocol bridging; real-time control loop < 10 ms cycle; onboard LEDs for Run / Error / Bus Active; supports redundant configurations.
    Applications:​ Alstom ALSPA MV3000 drives, wind turbine pitch/converter systems, generator excitation, industrial process automation as a VME-based controller.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Alstom ICP232 029.359325”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

ALSTOM 3EST125-975 DCC2382A

  • Power Supply Voltage: 24 VDC, 48 VDC, 110/220 VAC (depending on the model)
  • Input Signal: Analog/digital signal (depending on the model)
  • Output Signal: Analog/digital signal, relay output (depending on the model)
  • Communication Interface: RS232, RS485, Ethernet, IEC 61850, etc. (depending on the model)
  • Operating Temperature Range: -40°C to +85°C (industrial grade)
  • Protection Level: IP20 or higher (depending on the model)
  • Mounting Method: Rack mounting, DIN rail mounting (depending on the model)
Read more
Quick view

Alstom AL129A CD101152

Product Overview

AL129A CD101152 is a safety-certified digital output relay module designed exclusively for Alstom Turbine Guard steam/gas turbine protection systems. It executes hardwired safety trip logic upon detection of overspeed, excessive vibration, or bearing temperature faults, driving circuit breakers and emergency shutdown actuators with SIL 3 functional safety compliance.
Read more
Quick view

Alstom ALP121-S00

Product Overview

ALP121-S00 is a rack-mounted serial communication module enabling multi-drop RS-422/RS-485 serial bus data transmission between CENTUM VP DCS field control units and external third-party industrial devices including vibration monitors, turbine governors, and auxiliary PLC systems. It provides isolated differential serial signal transmission for long-distance industrial communication links.
Read more
Quick view

ALSTOM EP3-E-4-A Controller Module

Technical Specifications:
  • Input Voltage: AC 220V/380V
  • Control Interface: RS485, Modbus protocols
  • Operating Temperature: -20°C to +55°C
  • Communication: Supports multi-protocol compatibility and flexible configuration
  • Diagnostic Features: Self-diagnosis and remote monitoring capabilities
  • Component Quality: Industrial-grade hardware for durability
Read more
Quick view

ALSTOM L54E1100EC00

Product Name:​ ALSTOM ALSPA® Turbine Control System — 64 Logical Inputs / Digital I/O Card — L54E1100EC00 (E64L1 / ESV11)
Product Brief:​
L54E1100EC00 is a digital input/expansion module in the ALSTOM L54E series, frequently designated as a 64-point logical input card (E64L1) or ESV11-type I/O interface for turbine control and protection systems. It reads status contacts (valve limit switches, pushbuttons, pressure switch contacts) and feeds them to the turbine controller.
Read more
Quick view

Alstom L54E2900XK00

Product Overview

L54E2900XK00 is a rack-mounted signal processing module serving as the core data acquisition unit for large synchronous generator static excitation control systems. It samples real-time generator stator voltage, stator current, and rotor excitation current signals to execute closed-loop automatic voltage regulation (AVR) and grid stability control logic for power generation units.
Read more
Quick view

ALSTOM LE109A-1 Power System Control Module

Technical Specifications:
  • Input/Output Channels: Equipped with multiple digital and analog I/O channels for connecting sensors, actuators, and other control devices.
    • Digital I/O: 4 channels, configurable as inputs or outputs (e.g., incremental encoders, SSI transmitters).
    • Voltage Supply: 24 V DC (18–36 V DC range), compliant with SELV standards (DIN EN 60950-1).
    • Current Consumption: 0.3 A (idle); 2 A (all digital outputs active).
  • Sensor Interfaces:
    • Incremental Encoder: Supports standard, pulse train, and frequency measurement modes (max. 8 MHz pulse frequency).
    • SSI Transmitter: Configurable as master or slave, with gray/binary code data formats (8–32 bits) and transmission frequencies of 78 kHz–5 MHz.
    • Wire Fault Monitoring: Detects input errors and protects against 24 V faults.
Read more
Quick view

ALSTOM PIB102A3BEB0180 Intelligent Protection and Control Unit

Technical Specifications:
  • Voltage Rating: Compatible with MV and HV systems, typically up to 36 kV or higher, depending on configuration.
  • Current Rating: Supports a wide range of current transformers (CTs) and protection current levels.
  • Protection Functions:
    • Overcurrent protection (phase and ground).
    • Differential protection for transformers, generators, and busbars.
    • Distance protection for transmission lines.
    • Undervoltage and overvoltage protection.
    • Frequency protection and power swing blocking.
Read more
Quick view