Foxboro P0926GU — HART Smart Pressure Transmitter - Image 1
Foxboro P0926GU — HART Smart Pressure Transmitter - Image 2
Click to enlarge
Foxboro P0926GU — HART Smart Pressure Transmitter
Foxboro P0926GU — HART Smart Pressure Transmitter - Image 2
Foxboro P0926GH — HART Smart Pressure Transmitter
Foxboro P0926GH — HART Smart Pressure Transmitter
Back to products
Foxboro P0926JM — HART Smart Pressure Transmitter
Foxboro P0926JM — HART Smart Pressure Transmitter

Foxboro P0926GU — HART Smart Pressure Transmitter

Product Identity: Foxboro P0926GU — HART Smart Pressure Transmitter (Mid-Range)

Series Classification: Foxboro I/A Series Intelligent Transmitter

Core Function: Smart pressure sensing with 4–20 mA DC + HART 5/7 dual-signal output for medium-pressure process applications

Calibrated Span: 0 – 500 psi (0 – 3447 kPa) gauge

Category:
Description

Output Configuration: 4–20 mA DC analog + HART 5/7 digital overlay

Power Requirement: 24 VDC, acceptable range 12 – 42 VDC

Accuracy Rating: ±0.04% of calibrated span

Process Connection: 1/2 inch NPT male

Process Media Temperature: −40°C to +107°C (−40°F to +225°F)

Ambient Temperature: −40°C to +85°C (−40°F to +185°F)

Wetted Parts: 316L Stainless Steel throughout all process-contact areas

Housing Material: Aluminum alloy body with polyurethane protective coating

Ingress Protection: IP66 / IP67, NEMA 4X

Digital Resolution: 16-bit A/D conversion

Communication Standard: HART 5 and HART 7 fully supported

Overpressure Capacity: 2× URL sustained, 4× URL burst

Response Time: ≤ 50 ms

Stability: ±0.04% URL per year

Diagnostics: HART-based primary variable, secondary variable, sensor diagnostic status, alerts

Target Sectors: Oil and gas production facilities, chemical reactor monitoring, power plant feedwater systems

Approvals: FM Approved, CSA Certified, ATEX Zone 2

Installation Requirement: Apply thread sealant compatible with process fluid; torque process connection to 25 – 35 ft-lbs (34 – 47 Nm)

Key Differentiator: Bridges the gap between low-range and high-range smart transmitters — ideal for 500 psi applications requiring HART-enabled asset management

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Foxboro P0926GU — HART Smart Pressure Transmitter”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Foxboro 2AX-ALM-AR Alarm Annunciator Module

Product Type: Discrete Alarm Processing and Annunciation Module Overview: The Foxboro 2AX-ALM-AR is a dedicated alarm annunciator module designed for the Foxboro I/A Series Distributed Control System (DCS). It processes discrete alarm inputs, provides alarm prioritization, and drives annunciator outputs to alert operators of abnormal process conditions. The module is installed in a standard I/A Series chassis and communicates with the system controller via the I/A Series backplane.
Read more
Quick view
Placeholder

Foxboro E69F-BI2-MS Pneumatic Signal Converter

Technical Specifications
  • Accuracy
    • Output signal codes 2 and 3: ±1.0% of full scale
    • Output signal codes 7 and 8: ±2% of full scale
  • Linearity
    • ±0.5% of full scale, typical
  • Repeatability
    • ±0.25% of full scale, typical
  • Hysteresis
    • ±0.5% of full scale, typical
  • Supply Pressure Effect
    • Change in supply pressure causes zero shift of less than 0.04% of full scale/kPa
  • Ambient Temperature Effect
    • Over an operating range of 0 to 60°C (32 to 140°F), a 28°C (50°F) change in ambient temperature causes zero and span shifts of ±1% of full scale or less
  • Inclination Effect
    • A 5 - degree change in vertical inclination results in a maximum zero displacement of 0.25% of full scale
  • Shock Effect
    • At a shock test level of 300 m/s² (30 “g”) measured at the feedback bracket, the maximum zero displacement is 0.5% of full scale
Read more
Quick view

Foxboro FBM217 RH916XZ — 16-Channel Analog Input Module

Product Series: Foxboro I/A Series Fieldbus Module (FBM) — Analog Input Product Introduction: The FBM217 RH916XZ is a 16-channel analog input module of the FBM217 family with a distinct part number and revision code (RH916XZ). It provides 4–20 mA and 1–5 VDC input acquisition for 16 process measurement channels and is designed for deployment in Foxboro I/A Series DCS systems requiring high-density analog input coverage.
Read more
Quick view

FOXBORO FCP270

The FOXBORO FCP270 (Field Control Processor 270) is a distributed, fault-tolerant controller designed for industrial process automation. As part of the I/A Series Distributed Control System (DCS) by Foxboro (now Schneider Electric), it executes real-time control logic, data acquisition, and alarm management in harsh environments.
Read more
Quick view

Foxboro G448-0002 Serial Communication Gateway Module

Catalog Number: G448-0002 Model Series: G448 Series — I/A Series Communication Module Manufacturer: Foxboro (Schneider Electric / Invensys) Product Overview: The G448-0002 is a serial communication interface module for the Foxboro I/A Series distributed control system. It provides RS-232/RS-485 serial port connectivity to enable communication with third-party devices, PLCs, RTUs, and smart field instruments using industry-standard protocols.
Read more
Quick view

FOXBORO H92904CC0500 Multi-Function Industrial Module

Technical Specifications:
  • The H92904CC0500 module is designed to manage digital inputs and outputs, facilitating communication between field devices and the control system.
  • It supports standard voltage levels, typically including 24V DC, which is common in industrial environments for interfacing with sensors and actuators.
  • Capable of operating under various environmental conditions, ensuring stability and reliability in harsh industrial settings.
  • Features isolation techniques that protect against electrical noise and transient voltages, ensuring accurate signal processing.
Read more
Quick view

FOXBORO STK-RPS-150PS P0973BP

Technical Specifications

  • Input Power Range: 100 - 240V
  • Line Frequency: 50 - 60 Hz
  • Output Power: 150W
  • Output Voltage: 12V DC
  • Output Current: 1A, 8.5A, 13A
  • Form Factor: Standalone
  • Hot - Pluggable: Yes
  • Protection Class: IP20
  • Dimensions: 483 x 483 x 300 mm
  • Weight: 25 kg
Read more
Quick view

ProSoft PLX32-EIP-PND EtherNet/IP to PROFINET Gateway

Functional Features

    1. Bidirectional Data Integration
      • Seamless data mapping between EtherNet/IP™ and PROFINET® I/O controllers without ladder logic programming .
      • Supports 100 configurable commands per client for customized data reads/writes .
    2. High Reliability & Redundancy
      • Dual Ethernet ports enable redundant network topologies, eliminating single-point failures .
      • SD Card Slot: Stores configurations for rapid recovery or transfer between gateways .
Read more
Quick view