Foxboro P0924WV — Gauge Pressure Transmitter - Image 1
Foxboro P0924WV — Gauge Pressure Transmitter - Image 2
Click to enlarge
Foxboro P0924WV — Gauge Pressure Transmitter
Foxboro P0924WV — Gauge Pressure Transmitter - Image 2
Foxboro VE4003S2B1 Smart Electric Actuator
Foxboro VE4003S2B1 Smart Electric Actuator
Back to products
Foxboro P0926GH — HART Smart Pressure Transmitter
Foxboro P0926GH — HART Smart Pressure Transmitter

Foxboro P0924WV — Gauge Pressure Transmitter

Product Identity: Foxboro P0924WV — Gauge Pressure Transmitter

Series Classification: Foxboro E1A Analog Transmitter Family

Core Function: Converts applied process pressure into a proportional 4–20 mA DC current loop signal for DCS/PLC integration

Calibrated Span: 0 – 100 psi (0 – 689 kPa) gauge

Category:
Description

Output Type: 2-wire, loop-powered 4–20 mA DC

Supply Voltage Requirement: 24 VDC nominal, acceptable operating window 12 – 42 VDC

Measurement Accuracy: ±0.25% of calibrated span at reference conditions

Process Connection Thread: 1/2 inch NPT male, alternate option M20 × 1.5 metric

Wetted Parts Composition: 316L Stainless Steel diaphragm, pressure port, and all process-contact surfaces

Housing Construction: Cast aluminum alloy body with epoxy powder-coat finish

Protection Class: IP66 / IP67 ingress protection, NEMA 4X rated for outdoor and washdown use

Process Media Temperature: −40°C to +121°C (−40°F to +250°F)

Ambient Operating Temperature: −40°C to +85°C (−40°F to +185°F)

Electrical Entry: 1/2 inch NPT conduit fitting with internal terminal block

Zero & Span Trim: Dual external potentiometers located on transmitter top cover

Overpressure Tolerance: Sustained 2× URL without performance degradation

Burst Pressure Rating: 4× URL minimum structural integrity

Dynamic Response: ≤ 10 ms typical step response

Drift Specification: ±0.1% URL per annum long-term stability

Loop Resistance Limit: Up to 600 Ω at 24 VDC supply

Weight: 1.1 kg (2.4 lbs)

Target Applications: Oil and gas wellhead monitoring, water distribution networks, HVAC chiller systems, general process control loops

Compliance Marks: FM Approval Class I Div 2, CSA Certified, ATEX Zone 2

Installation Note: Orient process connection downward when measuring liquids; upward for gas service to prevent trapped air or liquid accumulation

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Foxboro P0924WV — Gauge Pressure Transmitter”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Foxboro 1C31169G02

Technical Specifications
  • Dimensions: 23 * 25 * 28 (unit not specified)
  • Weight: 1.08 kg
Functional Characteristics
  • High Reliability: FOXBORO modules usually have excellent stability and reliability, ensuring long - term stable operation in industrial automation environments.
  • Easy Integration: The module design takes into account compatibility with existing systems, making it relatively simple to integrate into the existing control architecture.
  • Powerful Control Functions: The module may support a variety of control algorithms and logics to achieve complex control tasks.
  • Diverse Communication Interfaces: The module may have a variety of communication interfaces, such as Ethernet, serial port, etc., for data exchange and integration with other devices and systems.
Read more
Quick view

Foxboro 685-069171-100 Pressure Transmitter Component

Product Type: Pressure Transmitter Sensing Element / Internal Module Assembly Overview: The Foxboro 685-069171-100 is a precision pressure sensing component used within Foxboro pressure transmitters. It serves as the core sensing element (diaphragm-based) that converts applied process pressure into an electrical signal. This part number identifies a specific revision of the sensor assembly compatible with Foxboro E-Series and I/A Series transmitter housings.
Read more
Quick view

Foxboro 873RS-BIYFGZ

Technical Specifications
  • Analog Output Specifications (if applicable)
    • Number of Channels: 8
    • Current Range: 4 - 20 mA
    • Resolution: 12 bits
  • Communication
    • Protocol: Modbus RTU
  • Physical Dimensions
    • Size: 72 mm x 22 mm x 68 mm or 14.7 cm x 5.15 cm x 11.4 cm
    • Weight: 0.2 kg or 0.6 kg
  • Power Supply
    • Input Voltage: 24V DC (typical value)
Read more
Quick view

Foxboro A2H124-24FX Ethernet Switch

Technical Specifications
  • Ports: 24 x 100Base - FX (MT - RJ), 2 x SFP uplink, 2 x 10/100/1000Base - T (RJ - 45), 1 x DB9 serial console port
  • Switching Capacity: 12.8 Gbps (standalone), 102.4 Gbps (stacked)
  • Forwarding Rate: 9.5 Mpps (standalone), 76.2 Mpps (stacked)
  • MAC Address Table: 8,000 entries
  • VLAN Support: 4,096 VLAN IDs, 1,024 VLAN entries per stack
  • Jumbo Frame Support: Up to 9,216 bytes
  • Power Input: 100 – 240 V AC, 50 – 60 Hz
  • Power Consumption: ~ 59 W
  • Operating Temperature: 0 °C to 50 °C
  • Storage Temperature: - 40 °C to 70 °C
  • Humidity: 5% to 95% (non - condensing)
  • Dimensions: 44.1 cm (W) × 4.4 cm (H) × 21.0 cm (D)
  • Weight: 2.7 kg
Read more
Quick view

Foxboro FBM203 Foundation Fieldbus Analog Input Module

Product Type: 8-Channel Foundation Fieldbus H1 Analog Input Module Overview: The Foxboro FBM203 is an 8-channel analog input module for the Foxboro FBM Series Foundation Fieldbus system. It accepts 4–20 mA DC signals from field transmitters (pressure, temperature, level, flow) and communicates the digitized values to the DCS controller via the Foundation Fieldbus H1 segment. The module also supports HART communication for smart transmitter configuration.
Read more
Quick view

Foxboro FBM218 — 8-Channel Analog Output Module

Product Series: Foxboro I/A Series Fieldbus Module (FBM) — Analog Output Product Introduction: The FBM218 is an 8-channel analog output module that generates 4–20 mA current loop outputs (or 1–5 VDC voltage outputs) to control final control elements including control valves, VSDs, and dampers. It is the standard 8-channel output module in the Foxboro I/A Series FBM family and provides precise, isolated analog output signals for process control applications.
Read more
Quick view

Foxboro FCP270 Field Control Processor

Technical Specifications
  • Power Supply: 85V – 265V AC/DC
  • Power Consumption: Less than 10W
  • Communication Interface: Ethernet, Modbus, CANopen, Profinet
  • Input Channels: 16 analog inputs
  • Output Channels: 8 analog outputs
  • Operating Temperature Range: -20°C to +60°C
  • Relative Humidity: 5% to 95% RH non-condensing
Read more
Quick view

Foxboro G448-0002 Serial Communication Gateway Module

Catalog Number: G448-0002 Model Series: G448 Series — I/A Series Communication Module Manufacturer: Foxboro (Schneider Electric / Invensys) Product Overview: The G448-0002 is a serial communication interface module for the Foxboro I/A Series distributed control system. It provides RS-232/RS-485 serial port connectivity to enable communication with third-party devices, PLCs, RTUs, and smart field instruments using industry-standard protocols.
Read more
Quick view