Bently Nevada 3500/15-05-00-01 Universal AC Power Supply Module - Image 1

Bently Nevada 3500/15-05-00-01 Universal AC Power Supply Module - Image 2

Bently Nevada 3500/15-05-00-01 Universal AC Power Supply Module

Technical Specifications

Input Voltage: 85–264 Vac rms, 47–63 Hz
Output Voltage / Current: 24 Vdc, 15 A (360 W continuous)
Load Regulation: ±1 % from 0 A to 15 A
Ripple & Noise: <50 mV p-p, 20 MHz bandwidth
Efficiency: 87 % typical @ 230 Vac, full load
Hold-up Time: 20 ms @ 115 Vac, full load
Protection: Over-current 120 % (auto-recover), over-voltage 28 Vdc (hiccup), short-circuit (fold-back), over-temp 105 °C (shutdown)
Isolation: Input-to-output 3 kVac, input-to-earth 1.5 kVac
Temperature Range: –40 °C to +70 °C operational, –55 °C to +125 °C storage
Dimensions: 221 mm × 50.8 mm × 120.7 mm (L × W × H)
Weight: 2.5 kg (5.5 lb)
Cooling: Internal fan, temperature controlled
Indicators: Green “AC OK”, red “Fault” LEDs on front bezel
Connector: IEC C14 inlet, crimp fork terminals for DC output
Agency Marks: CE, UL 508, ATEX, IECEx, CSA, TR CU, RoHS, REACH

Category: Bentley

Description

Functional Highlights

Universal Input: Accepts any mains from 85 Vac to 264 Vac without jumper selection.
High Power Density: Delivers 360 W in a half-height slot, supporting fully loaded 14-slot racks.
Hot-Swap Design: Slide-in module with captive screws; replacement <30 s while rack remains powered when redundant supply is present.
Redundancy Ready: Two modules can be installed in parallel with automatic load-sharing and fail-over.
Low Ripple Output: <50 mV noise ensures high-resolution vibration signals are not corrupted.
In-rush Limiting: Soft-start circuit reduces mains disturbance when multiple racks start simultaneously.
Thermal Management: Fan speed varies with temperature and load, extending bearing life and reducing acoustic noise.
System Integration: Front-panel LEDs and relay contacts report status to 3500/20 Rack Interface Module for System 1 software display.

Application Scenarios

Steam-, gas- and hydro-turbine generator vibration and thrust protection
Centrifugal and reciprocating compressors in LNG, olefins and refinery process trains
High-pressure boiler feed-water pumps in coal-fired and combined-cycle plants
Large motors, fans and gearboxes in steel, pulp & paper, mining and cement mills
Offshore platform critical drives and sub-sea pump motor monitoring
Nuclear reactor coolant pump vibration and speed trending

Installation Notes
Insert module into left-most slot; torque captive screws to 0.8 N·m; verify output is 24.00 V ±0.2 V before loading; bond earth terminal to rack earth bus with 2.5 mm² conductor; maintain 50 mm clearance above and below for fan cooling; operate only in environments that do not exceed IP 20 ingress protection.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Bently Nevada 3500/15-05-00-01 Universal AC Power Supply Module”

Shipping and Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.