Bently Nevada 3500/15 106M1081-01 Universal AC Power Input Module (PIM)
Technical Specifications
-
Input Voltage: 85–264 Vac rms, 47–63 Hz
-
Peak Voltage Withstand: 120–373 Vac pk
-
Maximum Rack Current: 2.8 A rms @ 240 Vac
-
Inrush Current: <25 A peak, <5 ms
-
Filtering: Differential-mode choke plus metal-oxide varistor
-
Isolation: Input-to-earth 1.5 kVac, input-to-output 500 Vdc
-
Temperature Range: –30 °C to +65 °C operational, –40 °C to +85 °C storage
-
Dimensions: 120.7 mm × 25.4 mm × 114.3 mm (H × W × D)
-
Weight: 0.34 kg (0.75 lb)
-
Connector: IEC C14 inlet, crimp fork terminals for rack back-plane
-
Agency Marks: CE, UL 508, ATEX, IECEx, CSA, TR CU, RoHS, REACH
Description
Functional Highlights
-
Universal Input: Accepts any mains from 85 Vac to 264 Vac without jumper selection.
-
Hot-Swap Design: Slide-in module with captive screws; replacement <30 s while rack remains powered when redundant supply is present.
-
Redundancy Ready: Two PIMs can be installed in parallel with automatic load-sharing and fail-over.
-
Surge Immunity: Integrated MOV and gas tube protect against 4 kV line-to-earth transients per IEC 61000-4-5.
-
Low Leakage: <0.5 mA earth-leakage current meets medical-grade safety requirements.
-
System Integration: Front-panel LEDs and relay contacts report status to 3500/20 Rack Interface Module for System 1 software display.
Application Scenarios
-
Steam-, gas- and hydro-turbine generator vibration and thrust protection
-
Centrifugal and reciprocating compressors in LNG, olefins and refinery process trains
-
High-pressure boiler feed-water pumps in coal-fired and combined-cycle plants
-
Large motors, fans and gearboxes in steel, pulp & paper, mining and cement mills
-
Offshore platform critical drives and sub-sea pump motor monitoring
-
Nuclear reactor coolant pump vibration and speed trending
Installation Notes
Insert PIM directly behind its mating 3500/15 power supply; torque captive screws to 0.8 N·m; verify input voltage is within 85–264 Vac before energizing; bond earth terminal to rack earth bus with 2.5 mm² conductor; maintain 50 mm clearance above and below for cooling; operate only in environments that do not exceed IP 20 ingress protection.
Insert PIM directly behind its mating 3500/15 power supply; torque captive screws to 0.8 N·m; verify input voltage is within 85–264 Vac before energizing; bond earth terminal to rack earth bus with 2.5 mm² conductor; maintain 50 mm clearance above and below for cooling; operate only in environments that do not exceed IP 20 ingress protection.
Reviews (0)
Shipping and Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
BENTLY 3500/33 149986-01
Technical Specifications
- Channels: 16 independent relay outputs.
- Relay Type: Single-pole double-throw (SPDT) contacts.
- Electrical Ratings:
- Max Switching Current: 5 A at 30 VDC or 5 A at 250 VAC.
- Max Switching Power: 120 W DC or 1250 VA AC.
- Min Load: 100 mA at 5 VDC (standard contacts); 1 mA at 1 VDC (low-current optional contacts).
BENTLY NEVADA 3500/15 133292-01 LOW-VOLTAGE DC POWER MODULE
Technical Specifications:
- Input Channels: Supports multiple input channels for connecting proximity probes, velocity sensors, and accelerometers, allowing comprehensive monitoring of machinery vibration and position.
- Communication Interfaces: Equipped with standard communication interfaces such as Modbus/TCP or Ethernet, facilitating integration with distributed control systems (DCS) and other plant management networks.
- Processor Capability: Features robust processing capabilities to handle real-time data acquisition, analysis, and alarming functions efficiently.
- Power Supply: Operates on a specific voltage range suitable for industrial environments, with options for redundant power supplies to ensure uninterrupted operation.
- Environmental Tolerance: Designed to withstand harsh industrial conditions, including resistance to temperature extremes, humidity, and electromagnetic interference.
Reviews
There are no reviews yet.