Bently Nevada 330171-00-08-10-02-00 5 mm Proximity Probe
Technical Specifications
-
Part Number: 330171-00-08-10-02-00
-
Probe Diameter: 5 mm
-
Unthreaded Length: 8 mm (0.31 in)
-
Thread Size: 10-32 UNF
-
Overall Case Length: 2.4 in (61 mm)
-
Total Length: 0.5 m (1.6 ft) including integral cable
-
Connector: Miniature coaxial, gold-plated, ClickLoc, IP67 when mated
-
Measurement Range: 0.25 mm to 2.3 mm (10 to 90 mil)
-
Sensitivity: 7.87 V/mm (200 mV/mil)
-
Linearity: ±0.05 mm (±2 mil)
-
Temperature Range: −35 °C to +177 °C (−31 °F to +351 °F)
-
Output Signal: Voltage proportional to gap
-
Agency Option: 02 – Multiple global approvals (ATEX, IECEx, CSA, NEPSI)
Description
Functional Highlights
-
Patented TipLoc molding method provides a robust bond between probe tip and body, eliminating flex fatigue.
-
Stainless-steel housing resists corrosion and mechanical abuse in high-vibration zones.
-
ClickLoc connector requires only finger-tight torque and emits an audible “click” to confirm secure mating.
-
FluidLoc cable option prevents oil or other liquids from leaking out of the machine through the cable interior.
-
Temperature-compensated coil design maintains ±1 % sensitivity drift over the full operating temperature range.
-
Fully interchangeable with any 3300 XL 5 mm extension cable and Proximitor sensor; no serial-number matching required.
Application Scenarios
-
Steam and gas turbine shaft vibration and axial position monitoring
-
Centrifugal and reciprocating compressor rod-drop and cylinder vibration protection
-
Large motor and generator air-gap eccentricity or rotor bar measurement
-
Refinery and petrochemical pump speed, phase reference, and zero-speed detection
-
Steel mill fan, blower, and gearbox bearing condition trending
-
Offshore platform cooling-water pump and top-drive monitoring loops
-
API 670 compliant machinery protection systems in hazardous areas worldwide
Reviews (0)
Shipping and Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
BENTLEY 3500/65 145988-02
Technical Specifications:
- Module Type: Keyphasor and Speed Monitoring Module
- Part Number: 145988-02
- System Platform: Bently Nevada 3500 Series Rack
- Input Channels: Accepts signals from one or two Keyphasor or speed sensors (configurable)
- Sensor Compatibility: Compatible with Bently Nevada proximity probes (e.g., 3300 series) and other active or passive speed sensors
- Frequency Range: 0.1 Hz to 20,000 Hz (suitable for low-speed to high-speed machinery)
- Speed Measurement Accuracy: ±0.05% of reading
BENTLY 3500/15 127610-01
Technical Specifications
- Power Supply Module:
- Input Voltage: 100–240 VAC, 50/60 Hz, 2 A.
- Output Voltage: 24 VDC (5.5 A max for single power supply; 7.5 A max for redundant setup).
- Power Capacity: 190–250 W (adjustable based on load).
- Operating Temperature: 0°C to 60°C (storage: -40°C to 70°C).
- Protection: Overload, short-circuit, and overvoltage protection.
- Certifications: Complies with CCC and industrial safety standards.
Reviews
There are no reviews yet.