Shop

• Technical Specifications:
  • Processor: PowerPC 604e or 32-bit RISC processor, with a main frequency of 400 MHz or 1 GHz.
  • Memory: 256 MB SDRAM or 2 MB; 256 MB Flash or 8 MB of storage space; or 256 kb RAM and 128 kb ROM.
  • Operating Voltage: 24 VDC.
  • Output Frequency: Up to 60 kHz.
  • Power Consumption: Maximum 2.5 W.
  • Communication Interface: Supports Ethernet TCP/IP, PROFIBUS DP, CAN, RS-485, RS-232, Modbus RTU/TCPIP and other protocols.
  • Protection Level: IP20 or IP65.
  • Operating Temperature: -25 °C to +60 °C or 0 °C to +55 °C.
  • Dimensions: 160 x 100 x 50 mm or 190 x 230 x 80 mm.
  • Weight: Approximately 1 kg or 2.5 kg.
  • Installation Method: Rail-mounted, wall-mounted or rack-mounted.
  • Number of I/O Points: 128.
  • Certification: CE, UL, CSA-certified products.

Technical Specifications

• Processor parameters: Equipped with an 800 MHz high-performance processor; some versions use an MPC 866 microprocessor running at 133 MHz.
• Memory capacity: Supports up to 8 GB of DDR3L memory expansion; is equipped with 4 MB flash PROM (for storing firmware), 16 MB SDRAM, and 16 MB RAM with internal and external battery backup functions.
• Power supply parameters: The nominal voltage is 24V DC, and the voltage range is 19.2V DC to 30V DC; the typical power consumption is 5.1W, and the typical power consumption including all module bus and CEX bus power is 8.6W; the typical current consumption is 210mA, and the maximum is 360mA (excluding module bus and CEX bus power); it has an internal 5ms power backup capability.

• Processor: Advanced PowerPC processor with a high clock speed, enabling fast and efficient processing of control algorithms and data.

• Processor: 1 GHz CPU for high-speed data processing
• Memory: 8 MB RAM and 2 MB Flash memory for storing control programs and data
• Input Voltage: 24 VDC
• Operating Temperature Range: -40°C to +70°C, suitable for extreme industrial conditions
• I/O Capacity: Supports up to 800 I/O points for connecting various sensors and actuators
• Communication Interfaces:
  • Ethernet for high-speed network connectivity
  • RS-232 and RS-485 for serial communication
  • PROFIBUS-DP and MODBUS for integration with field devices

Technical Specifications

• Processor Performance:
  • CPU: 32-bit PowerPC 8641D dual-core processor (1.0 GHz per core)
  • Floating-Point Unit: Supports 32-bit/64-bit floating-point operations (compliant with IEEE 754)
  • Control Cycle Time: Minimum 0.5 ms (for high-speed control tasks); configurable up to 1000 ms
  • Instruction Execution Speed: 2000 MIPS (million instructions per second)
• Memory Configuration:
  • RAM: 1 GB DDR2 SDRAM (ECC error correction for data integrity)
  • Flash Memory: 512 MB NAND Flash (for firmware, configuration files, and log storage)
  • Backup Memory: 256 KB non-volatile RAM (NVRAM) with lithium battery backup (retains data for 10 years without power)
• Redundancy Features:
  • Redundancy Mode: 1+1 hot standby (active-standby)
  • Failover Time: ≤ 50 ms (automatic switchover without process interruption or data loss)
  • Synchronization: Real-time data synchronization between active and standby units (via dedicated redundant bus)
  • Redundancy Monitoring: Continuous health checks of CPU, memory, power supply, and communication links