Macrotek MSPC-68866800
Product Name: Macrotek MSPC-6886/6800 Series Industrial PCI/ISA Single Board Computer (SBC)
Product Overview: A legacy industrial-grade CPU board based on Intel Slot 1 architecture (440BX chipset era), designed for long-life embedded control, data acquisition, and test systems requiring ISA/PCI passive backplanes.
Magnetek HP4-1D-T-S1139
-
Product Name: Magnetek HP4 Series Radio Remote Control Receiver / Controller
-
Product Introduction: Part of Magnetek's industrial radio control systems, typically a receiver unit or specific drive interface module used for wireless control of cranes, hoists, and industrial machinery. The "HP4-1D-T-S1139" identifies the enclosure type, frequency band, and configuration.
Magnetek MG2-1F-3FE
Product Name: Magnetek Impulse·G+ / G2 Series Industrial 24 VDC Output AC-DC Switching Power Supply Module (MG2-1F-3FE)
Product Description: A modular, enclosed single-output switch-mode power supply unit (PSU) from Magnetek's MG2/G2 family, designed to provide regulated 24 VDC for cranes, hoists, industrial automation cabinets, and magnet/brake supplies. Some references also classify the MG2-1F-3FE as a compact AC drive in certain crane-control contexts, but the predominant industrial listing identifies it as a 24 VDC industrial SMPS with N+1 redundancy capability.
Martek PS2494-YE
Product Name: Martek Power PS2494-YE AC-DC Switching Power Supply Unit (for Ionpure EDI stacks)
Product Brief: Industrial high-voltage DC output switching power supply designed to drive electrodeionization (EDI) modules or similar high-voltage/low-current DC loads. Accepts wide-range 3-phase AC input.
Matrox XSL514
Product Name: Matrox Imaging Library (MIL) / Matrox 4Sight / Helios — GigE Vision / Camera Link Interface Board (XSL514 — Matrox Solios / Morphis / Radient series frame grabber mezzanine)
Overview: The Matrox XSL514 is a Camera Link™ or CoaXPress / GigE Vision interface mezzanine module for Matrox high-performance frame grabbers (e.g., Matrox Radient eV-CL, Matrox Solios). It provides 1 or 2 Base / Medium / Full Camera Link connectors for machine vision cameras.
MDB MLSI-DR11-W
Product Series: MDB MLSI Series — legacy-compatible interface / modern DIN-rail I/O variant
Product Brief: Compact DIN-rail mounted digital input/output and relay interface used for machine panel control, OEM equipment integration, or as a modern replacement/adaptation of classic DEC DR11-W parallel I/O concepts in industrial cabinets. Provides optically isolated 24 VDC digital inputs and relay contact outputs (SPST/SPDT per variant) for low-voltage load switching.
MERCURY STEP C-663
MERSON 1X00781H01L Power Module
Technical Specifications:
- Input Voltage: 100-240 VAC (47-63 Hz)
- Output Voltage: 24 VDC
- Rated Output Current: 10 A
- Output Ripple & Noise: <50 mVpp
- Efficiency: >85%
- Operating Temperature Range: -40°C to +70°C
- Storage Temperature Range: -40°C to +85°C
- Protection Grade: IP30
- Installation: DIN rail mounting
- Dimensions: 100 × 58 × 25 mm
- Weight: 350 g
Metso 17-107-513-120
Product Introduction:
The Metso 17-107-513-120 is a smart valve positioner manufactured by Neles (Metso Flow Control). It is used to precisely control the position of pneumatic actuators on control valves in process industries. The positioner receives a 4–20 mA control signal from a DCS/PLC and converts it to a proportional pneumatic output (3–15 psi) to position the valve. The "17-107-513-120" is the specific Metso part number for this model variant.
Metso A413147
Product Brief Introduction
Standard field signal acquisition card for Metso Outotec BIU8 distributed control platform, dedicated to collecting analog voltage/current signals from mining, mineral processing and heavy industrial on-site transmitters, realizing high-precision signal conditioning and bus data upload to main controller.
Metso A413240
Product Brief Introduction
Core bus communication bridge card of Metso BIU8 control system, responsible for data exchange between DCS backplane and upper computer HMI, third-party PLC and remote monitoring equipment, realize bidirectional real-time transmission of control commands and measurement data, support multi-protocol adaptive communication.
Metso A413331
Product Brief Introduction
Original OEM transmission spare part matched with Metso crusher, feeder and mining automatic adjustment actuator, convert servo motor rotary motion into linear precise displacement, used for ore feeding opening adjustment, crushing gap automatic calibration and screening equipment stroke control, high load impact resistance and long wear service life.
