Shop

Technical Specifications:

• Type: Typically serves as an interface or communication module within the Tricon system.
• Communication Protocols: Supports industry-standard protocols to ensure compatibility with various control systems and devices.
• Power Supply: Operates within specified voltage ranges suitable for industrial environments.
• Environmental Endurance: Designed to withstand harsh conditions including wide temperature ranges, humidity, and exposure to dust.
• Certifications: Certified for use in Safety Instrumented Systems (SIS) up to Safety Integrity Level 3 (SIL 3), ensuring compliance with stringent safety standards.

• Signal Processing Parameters
  • It can convert small signals based on high common - mode voltage into single - ended signals relative to the system chassis ground, which effectively solves the interference problem of high common - mode voltage on signal transmission.
  • The built - in isolation amplifier can amplify weak analog input signals. The signal filtering function can filter out external noise, and the measurement resolution and accuracy of analog signals are significantly improved after processing.
  • It supports 8 PI points and 16 PTI points, which can meet the collection and processing needs of multiple groups of analog signals at the same time.
• Physical Parameters
  • It adopts a standard industrial control card design, which is consistent with the installation size of Triconex series module slots. It can be directly inserted into the dedicated position of the Triconex system chassis for installation.
  • The module uses a hard metal shell, which has good physical protection performance. The wiring interface adopts a standard terminal design, which facilitates firm connection with field sensors and internal system lines.

• Electrical Parameters
  • It supports multiple analog input ranges, including 0 - 10V, -10V to 10V, 4 - 20mA, and 0 - 20mA, covering the signal requirements of most industrial field sensors.
  • It has a measurement accuracy of ±0.1% and a resolution of 12 bits, and the signal update rate reaches 250ms, which can ensure the accuracy and real-time performance of data collection.
  • It uses a 24VDC power supply, with a power consumption of only 5W, which will not add excessive power burden to the overall safety system.
• Physical Parameters
  • Its overall dimensions are 110mm × 45mm × 22mm, and its weight is 150g. The compact and lightweight design allows it to be flexibly installed in control cabinets with limited space.
  • It is equipped with screw-type terminals, which can provide firm wiring connections and avoid poor contact caused by vibration in industrial environments.

• Number of Channels: 8
• Input Range: 4 mA to 20 mA
• Accuracy: ±0.25%
• Response Time: Less than 250 ms
• Power Consumption: 24 VDC, 2.5 A
• Operating Temperature: - 40°C to +70°C
• Humidity: 0% to 95% non - condensing
• Supported Input Signal Types: Voltage (±10V, 0 - 10V) and current (4 - 20mA) (additional information from another source)

• Processors: Multiple 333 MHz CPUs for parallel processing.
• Memory: 64 MB RAM and 256 MB Flash for complex logic operations and data storage.
• Digital I/O: 32 channels, configurable as inputs or outputs to adapt to diverse field signal requirements.
• Analog I/O: 16 channels supporting high/low-state digital outputs and compatibility with various sensor signals.
• Communication Protocols: RS-232, RS-485, Ethernet for seamless integration with third-party devices (e.g., PLCs, DCS).
• Fieldbus Support: PROFIBUS DP, Modbus RTU, DeviceNet for simplified system architecture.
• Redundancy: Dual-channel redundant structure with automatic main/backup channel switching to ensure uninterrupted operation during single-point failures.

Technical Specifications:

• Type: Communication Module
• System Compatibility: Designed to work within the Tricon system architecture, supporting seamless integration with other Tricon components.
• Communication Protocols: Supports various industry-standard communication protocols, facilitating connectivity with Distributed Control Systems (DCS), Supervisory Control and Data Acquisition (SCADA) systems, and other plant networks.