FOXBORO FBM232 P0926GW

Product Name: Foxboro (Schneider Electric) FBM232 P0926GW Ethernet FDSI Field Device Integration Module
Product Introduction: A single-port 10/100 Mbps Ethernet communication module for Foxboro I/A Series and Evo DCS. Enables integration of third-party Ethernet-enabled field devices (PLCs, intelligent instruments, VFDs, analyzers) using Modbus TCP, EtherNet/IP (via downloadable driver), or other FDSI protocol stacks. Acts as a gateway between the Foxboro Control Station and external Ethernet devices.

Category: FOBORO

Description

Technical Specifications:
- Ethernet Port: 1 × RJ-45, 10/100BASE-TX, Auto-MDIX, Half/Full Duplex
- Protocols Supported: Modbus TCP (native), EtherNet/IP, others via downloadable FDSI driver; UDP/IP, TCP/IP stack
- Device Capacity: Up to 64 Ethernet field devices per module (performance-dependent)
- Data Connections: Up to 2000 DCI (Distributed Control Interface) blocks
- Data Types: 16/32-bit integer, IEEE 754float, binary packed (up to 32 bits), ASCII string
- Scan Time: Configurable; min. typical 500 ms for cyclic data exchange
- Power Supply: 24 VDC redundant input (+20 % / -10 %), typ. 5 W, max. 7 W
- Indicators: PWR (green), LINK (green), TX/RX (amber), ERR (red)
- Environmental: Operating -20 °C to +70 °C (some docs -40 °C to +70 °C); Storage -40 °C to +85 °C; ISA S71.04Class G3 (corrosive atmosphere)
- Certifications: CE, UL, CSA, ATEX Ex nA IIC T4 (Zone 2), ABS marine
- MTBF: > 180,000 hrs @ 40 °C
- Mounting: Snap-in to I/A Series FBM baseplate / Node; DIN rail compatible bases available
- Dimensions: approx. 135 × 100 × 50 mm
Structure & Material: Industrial-grade plastic/metal hybrid housing with EMC gaskets, RJ-45 with link/activity LEDs, front panel status LEDs.
Working Principle: The FBM232 runs a fieldbus device driver that opens TCP sockets to configured slave devices, polls/reads/writes registers per mapping table defined in Foxboro System Manager, and maps received data into DCI blocks accessible by control strategies. Configuration is performed via Foxboro’s I/A Configuration Manager.
Installation & Notes: Assign static IP or use DHCP reservation. Ensure firewall/network segmentation complies with plant cyber-security policy. For Modbus TCP, confirm slave device unit ID and register mapping (0-based vs 1-based). Firmware version must be compatible with DCS node type (FCP270/280 or older FCM). Supports redundant FBM232 pairing in newer nodes.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “FOXBORO FBM232 P0926GW”

Shipping and Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.