Densan DVE-R3900-20A (9328) - Image 1
Click to enlarge
Densan DVE-P7447-50B
Densan DVE-P7447-50B
Back to products
Densan DVE-SH7032
Densan DVE-SH7032

Densan DVE-R3900-20A (9328)

Product Name​
Densan DVE-R3900-20A Industrial Board or Controller, Suffix 9328
Product Overview​
Densan DVE-R3900-20A (9328) is listed as a Densan industrial electronic assembly in spare-part sources. No complete public Densan datasheet for suffix 9328 was retrieved. Request the official technical specification before system integration.
Category:
Description
Technical Specifications​
Verify rated current or signal capacity indicated by the 20A code, supply voltage, control logic, communication protocol, thermal class, and mechanical dimensions from the original Densan nameplate and manual.
Functional Features​
The unit is intended for industrial control, power interface, or system I/O according to the original equipment design. Exact relay, driver, or communication features must be confirmed from the factory configuration.
Application Scenarios​
Use for Densan-based automation replacement, industrial control-cabinet service, MRO inventory, and legacy machinery maintenance where model DVE-R3900-20A is originally specified.
Material Composition​
Industrial board construction includes FR-4 multilayer laminate, power semiconductors or electromechanical components where applicable, passive devices, connector blocks, and protective housing according to the rated current class.
Structural Characteristics​
The assembly provides a rigid PCB or module format with power terminals, control connectors, heat dissipation provisions if required, and mounting points matched to the original enclosure.
Working Principle​
Control signals from the host system activate onboard power stages or interface circuits, which switch or regulate the output according to the programmed parameters and feedback received from the connected load.
Installation Requirements​
Confirm current rating, wiring cross-section, and protection devices before connection. Install with proper torque on power terminals. Verify grounding and overload protection. Energize only after insulation and continuity checks.
Usage Precautions​
Do not exceed the rated 20 A or equivalent designation without Densan confirmation. Prevent overheating by maintaining specified ventilation. Inspect terminals periodically for loosening and oxidation. Store in dry anti-static conditions.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Densan DVE-R3900-20A (9328)”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

CCC TIOC-555HD

Technical Specifications

There is currently no specific and detailed technical specification information available for the CCC TIOC - 555HD. However, based on similar products such as the CCC IOC - 555 - D, it may have the following characteristics:
  • Communication Interface: May support RS - 485 communication.
  • I/O Channels: It is possible to have multiple digital inputs and outputs, as well as analog inputs and outputs. For example, the IOC - 555 - D has 8 digital inputs, 4 digital outputs, 2 analog inputs, and 2 analog outputs.
Read more
Quick view

EATON XC-CPU202-EC4M-8DI-6DO-XV

  • Power Supply: 24 V DC, with an input power of 33 W and a supply voltage range of 20.4 - 28.8 V DC.
  • Dimensions: Length/Depth 100 mm, Height 100 mm, Width 60 mm.
  • Weight: 0.25 kg.
  • Processor: ARM 532 MHz.
  • Memory: 4 MB.
  • I/O Configuration: 8 digital inputs (DI) and 6 digital outputs (DO).
  • Communication Interfaces: Ethernet (100 Base - TX/10 Base - T), RS 232, CAN.
  • Certifications: EN 50178, IEC/EN 61131 - 2, EAC.
  • Protection Level: IP20.
  • Ambient Operating Temperature: 0 °C - 55 °C.
  • Ambient Storage Temperature: - 25 °C - 70 °C.
Read more
Quick view

Elmo G-TUB30480ERSS0

  • Rated Voltage: 480 VAC
  • Rated Current: 30 A
  • Continuous Power: Up to 25 kW
  • Communication Interfaces: Ethernet, CANopen, RS232, EtherCAT, etc.
  • Feedback Types: Encoder, resolver, Hall sensor (depending on the model)
  • Operating Temperature Range: - 40°C to +70°C (industrial - grade)
  • Protection Level: IP20 or higher (depending on the model)
  • Installation Method: Rack - mount, DIN - rail mount (depending on the model)
Read more
Quick view

KUKA KSD1-08 Servo Drive Module – Complete Technical Profile

Technical Specifications:
  • The KSD1-08 is part of a series of drive systems tailored for dynamic and efficient operation of robotic arms and similar machinery.
  • It supports various communication protocols essential for integration within complex automation systems.
  • Capable of handling significant power loads while maintaining high efficiency and minimal heat generation, ensuring reliable performance over extended periods.
Read more
Quick view

NOUENVOG AAP3798102-00131

Application Scenarios

  1. Compressor Control Systems
    • Cameron TA-Series: Manages inlet valve positioning, oil pressure, and vibration monitoring in TA2000/TA3000 compressors .
  2. Energy Infrastructure
    • Pump Stations: Regulates flow/pressure in pipeline transport .
    • Gas Turbine Backup: Synchronizes auxiliary systems during grid failures .
  3. Industrial Automation
    • Production Lines: Interfaces with Schneider/Bently Nevada PLCs for safety interlocks .
    • Remote Monitoring: Transmits operational data to SCADA via Modbus .
Read more
Quick view

SAACKE FSC-01

Technical Specifications:
  • Supply Voltage: 24 V DC (typical), with options for 110–230 V AC in certain configurations
  • Power Consumption: Low power draw, optimized for continuous operation
  • Operating Temperature: -10°C to +55°C
  • Storage Temperature: -25°C to +70°C
  • Humidity Range: 5% to 95% relative humidity, non-condensing
  • Protection Rating: IP20 (suitable for indoor panel mounting)
  • Input Compatibility: Accepts signals from flame detectors including UV, IR, and ionization sensors
  • Output Relays: Equipped with safety-rated relay outputs for burner activation, alarm signaling, and system shutdown
Read more
Quick view

TOSHIBA GBU648E-S

  • Slot Capacity: Supports up to 8 modules, allowing flexible configuration with TOSHIBA’s EX10 series components (e.g., power supplies, CPUs, I/O units).
  • Power Supply Compatibility: Works with modules like PS261 (power supply) and PU11A (CPU), ensuring stable energy distribution and control logic execution.
  • Communication Modules: Integrates with Profibus DP modules (e.g., GPF611-S) for seamless connectivity with field devices, enabling real-time data exchange in industrial networks.
  • Analog/Digital Modules: Compatible with GAD668-S (analog input) and GDA664-S (analog output) modules, supporting high-precision signal processing for sensors and actuators.
  • Physical Design: Compact, rack-mounted structure optimized for space efficiency in control panels.
Read more
Quick view

ygo 7702 8070-0102-35

  • Laser Type: Helium - neon laser
  • Wavelength: 633 nm
  • Output Power: > 400 µW
  • Beam Diameter: 3 mm or 6 mm
  • Usable Beam Length: 2 m
  • Beam Pointing Stability: < 0.1 arc sec/°C
  • Operating Temperature: 10 - 30 °C
  • Vacuum Wavelength Stability: 0.01 ppm/24 hour
  • Mounting Type: May have different mounting options, such as with plastic mounting feet.
  • Weight: Approximately 5.5 kg (for some models of the 7702 laser head)
Read more
Quick view