Foxboro FBM232 P0926GW
Product Introduction: The FBM232 is a DCS node component for Foxboro Evoluton / I/A Series that provides a 10/100 Mbps Ethernet port to communicate with intelligent field devices or third-party systems using Modbus TCP/IP, EtherNet/IP, or custom drivers. It offloads protocol handling from the control processor.
Woodward SPM-D1115B 8440-2165
Product Name: Woodward SPM-D2-1115B / 8440-2165 — Digital Synchronizer and Load Share Controller for Gen-Set Breaker Closing
Product Introduction: A panel-mount microprocessor-based device that monitors generator and bus voltage, frequency, and phase angle, then issues raise/lower bias signals to the engine governor and AVR to achieve bumpless synchronization and supports isochronous kW/kVAR load sharing among multiple generators.
Hirschmann SPIDER 1TX/1FX-SM EEC
Product Name: Hirschmann SPIDER 1TX/1FX-SM EEC, Industrial Unmanaged Fast Ethernet Switch, 1×10/100Base-TX RJ45 + 1×100Base-FX Single-Mode Fiber SC
Product Introduction: A compact, unmanaged DIN-rail mounted industrial Ethernet switch providing one twisted-pair copper port and one single-mode fiber optic port for extending Ethernet networks over long distances in harsh industrial environments. No configuration required—plug-and-play.
Emerson SP4402
Product Name: Emerson (Control Techniques) Unidrive SP Model SP4402, 3-Phase 460V AC Drive / Inverter
Product Introduction: The SP4402 is a high-performance universal AC drive from the Unidrive SP series, designed for precise open-loop vector (sensorless), closed-loop vector, and servo motor control. It is suitable for demanding applications requiring high dynamic response, torque control, and multi-axis synchronization.
ICS Triplex T8451
Product Name: Trusted® TMR 24 V dc Digital Output (DO) Module
Introduction: 40-channel 24 V DC digital output module with TMR architecture. Each output point is driven by three parallel output stages with 2oo3 (2-out-of-3) voting. Includes automatic line monitoring for open/short on the output side.
ICS Triplex T8431C
Product Name: Trusted® TMR Analog Input (AI) Module — 24 V dc / 4–20 mA
Introduction: High-integrity analog input module with 8 independently isolated channels, each reading 4–20 mA (also 0–20 mA configurable). Triple A/D conversion per channel with voting logic to ensure signal integrity.
-
Input Signal: 4–20 mA DC (or 0–20 mA), per channel
IICS Triplex T8231
Product Name: Trusted® TMR System Power / Expander Module (Power Supply Interface for I/O Rack)
Introduction: The T8231 is a TMR power and system interface module that supplies regulated power to the Trusted I/O rack and interfaces with the Trusted controller (usually T8110B/T9100 series processor). It ensures clean, redundant 24 V DC distribution to all I/O modules in the rack and participates in system health monitoring.
Callenberg SYMAP ECG-8549
Product Name: SYMAP® ECG — Integrated Engine Control & Generator Protection Unit (2-in-1)
Product Introduction: The SYMAP ECG is an all-in-one microprocessor-based controller managing both the prime mover (diesel/gas engine) and the generated electrical output. It performs auto-start/stop, synchronizing, load sharing, and provides comprehensive generator protection plus engine safeguard functions. The ECG-8549 variant is configured for medium-to-large gensets with direct 3-phase voltage/current measurement.
Bosch Rexroth SYHNC100-WRP-4-P4P-I-00000 R901108573
Product Introduction: The SYHNC100 series is a compact, standalone digital closed-loop controller designed for precise position, pressure/force, and speed control of hydraulic axes using proportional or servo valves. It is not a simple amplifier — it contains a full NC-kernel capable of executing complex motion profiles, synchronized multi-axis control, and mode-switching (e.g., position→pressure). The "WRP-4-P4P-I" variant typically denotes wall-mount/panel version with 4 subordinate controllers, PROFIBUS DP or similar fieldbus interface, and analog I/O configuration.
Honeywell TTCS41M
Manufacturer: Honeywell Building Technologies
Product Introduction: An outdoor ambient temperature sensor containing a passive resistive element (typically NTC 10kΩ or Pt1000 depending on regional variant) used in building automation for enthalpy economizer control, freeze protection, and weather-compensated HVAC reset.
Honeywell TP-2373-6
Manufacturer: Honeywell Building Technologies (Commercial Security / HVAC Sensors)
Product Introduction: A passive temperature sensing element intended for use in HVAC building automation systems — duct averaging, immersion in water piping, or wall-mount room sensing — transmitting resistance signal to Honeywell Excel 500/800, Spyder, or third-party controllers with matching input.
Yokogawa TLC411F
Product Name: Yokogawa TLC411F (F3 series equivalent — FA-M3 PLC 16-Point DC Transistor Output Module, Sink Type)
Manufacturer: Yokogawa Electric Corporation
Product Introduction: A compact 16-channel DC 24 V sinking (NPN) transistor output module for the Yokogawa FA-M3 (F3) programmable logic controller, used to drive solenoids, indicator lamps, contactors, and other low-power DC loads.
