Show sidebar
Show 9 12 18 24

GE Multilin 369-HI-0-M-0-0-0-E Motor Management Relay

Technical Specifications:
  • Control Power Input: 50-300 VDC or 40-265 VAC
  • Phase Current Input: 1 A and 5 A (secondary of current transformers)
  • Analog Outputs: Four 4-20 mA analog outputs (with optional metering package)
  • Digital/Switch Inputs: Six optically isolated inputs
  • Operating Temperature: -40°C to +60°C
  • Storage Temperature: -40°C to +80°C
  • Environmental Humidity: Up to 95% non-condensing
  • Dimensions: Approximately 29.6 cm (H) x 10.7 cm (W) x 20.5 cm (D)
  • Weight: Around 8 pounds (3.6 kg)
  • Display: Enhanced LCD display for easy viewing of parameters and settings
Read more
Quick view

GE MVAX31S1DE0754A

Product Introduction

The MVAX31S1DE0754A is a dedicated trip circuit supervision relay from GE Grid Solutions (formerly AREVA) designed to continuously monitor the integrity of medium-voltage circuit breaker trip circuits in power systems. It verifies the functionality of trip coils, wiring, and auxiliary contacts under both open and closed breaker states, detecting faults such as open circuits, short circuits, and ground faults in real time. The relay generates alarm and trip block signals upon fault detection to prevent failed breaker operations and enhance system reliability. It integrates with substation automation systems via standard communication protocols, supports seamless integration with existing protection schemes, and operates in harsh industrial environments with robust design and global certifications.
Read more
Quick view

GE MWB90-2 Ultrasonic Transducer

Product Overview The GE MWB90-2 is a high-performance ultrasonic transducer designed for non-destructive testing (NDT) applications. It operates as a single crystal oblique probe, utilizing shear wave technology to detect defects in materials with precision. The probe is engineered for durability and ergonomic efficiency, featuring a rugged cast housing and a replaceable wear pad to extend service life. It is compatible with various ultrasonic flaw detectors and supports multiple testing standards, including DGS defect quantification.
Read more
Quick view

GE MX150

Product Overview

The GE MX150 is a microprocessor-based controller designed for GE Zenith ZTG/ZTGD/ZTGSE/ZTGDSE series automatic transfer switches (ATS), serving as the core control unit for emergency and standby power systems. It replaces the legacy MX100 controller and integrates a microprocessor board, LCD/keypad interface, and isolated I/O for seamless interaction with dual power sources (S1: normal, S2: emergency). The controller monitors voltage, frequency, and phase synchronization of both sources, automatically transferring loads to the backup source when the normal source fails, and retransferring once the normal source stabilizes within preset parameters.
Read more
Quick view

GE NE724A

Product Introduction

The NE724A is a high-density, 48 VDC digital input module from GE Vernova, engineered for reliable monitoring of discrete signals in industrial automation and turbine control systems. It features 16 isolated input channels, each with optical isolation to eliminate ground loops and noise interference, ensuring accurate signal acquisition in harsh industrial environments. The module integrates seamlessly with GE’s Mark VIe turbine control systems and PACSystems RX3i/RX7i programmable automation controllers, supporting ToolboxST configuration software for quick setup and diagnostics.
Read more
Quick view

GE P110-6052

Product Introduction

The P110-6052 is a high-reliability 24 VDC redundant power supply module designed by GE Vernova for industrial automation and turbine control systems. It delivers a stable 24 VDC output to support critical loads in PACSystems RX3i/RX7i programmable automation controllers and Mark VIe turbine control systems. The module features redundant architecture, enabling seamless switchover between two power inputs to eliminate single points of failure and maximize system availability. It integrates advanced protection mechanisms against overvoltage, overcurrent, short circuits, and over-temperature, ensuring the safety of connected devices and the power supply itself.
Read more
Quick view

GE P111-6053

Product Name:​ GE / Converteam (Alstom) ALSPA P111-6053 Advanced Microcontroller / Digital Interface Module
Manufacturer:​ Converteam (formerly Alstom Power Conversion), now part of GE Industrial Solutions
Product Category:​ Legacy ALSPA control system I/O or processor module — typically a digital I/O interface or microcontroller board for GE/Alstom ALSPA racks
Read more
Quick view

GE PCH1026

Product Overview

The GE PCH1026 is a highly configurable digital structural vibration monitor engineered for low‑frequency (0.05–1000 Hz) monitoring in wind turbines, developed in collaboration with global turbine manufacturers and protecting over 100,000 units worldwide. It integrates a 3‑axis internal accelerometer (X/Y/Z) and up to 4 external sensor inputs to capture acceleration, velocity, and displacement across critical turbine structuresPCH Engineering A/S. The unit uses advanced DSP with 50% overlap FFT, 127 zoom ranges, and programmable filters to isolate structural modes from operational noise, delivering precise RMS/Peak/Peak‑to‑Peak measurements.
Read more
Quick view

GE PCH1026CHF861016

Product Introduction

The PCH1026CHF861016 is a high-precision triaxial digital structural vibration monitor engineered by GE Vernova for low-frequency vibration monitoring in wind energy and industrial applications. It integrates three internal accelerometers (X, Y, Z axes) to capture comprehensive structural motion data, supporting up to 4 independent frequency bands per sensor for detailed analysis. The module employs advanced DSP technology and field-proven filtering algorithms to measure RMS, peak, and peak-to-peak values with exceptional accuracy.
Read more
Quick view

GE PCIE-5565PIORC-10000

Product Introduction:​
The PCIE-5565PIORC is a reflective memory (also called shared memory or mirrored memory) node card for building deterministic, low-latency distributed real-time networks. Data written to the local SDRAM by the host CPU is automatically broadcast over fiber-optic links to all other nodes in the reflective memory ring/star, appearing in their local memory without software intervention. This creates a software-transparent shared memory space across multiple computers — essential for hardware-in-the-loop (HIL) simulation, flight test, and synchronized process control.
Read more
Quick view

GE PCIE-5565RC-100000 Reflective Memory Network Interface Card

Product Overview The GE PCIE-5565RC-100000 is a high-performance PCIe-based reflective memory network interface card designed for real-time data sharing across multiple computing nodes. It enables deterministic data transmission with ultra-low latency by mirroring a physical memory segment across all nodes in a ring topology. This card is widely used in distributed systems requiring strict synchronization and high-speed data exchange, such as aerospace simulation, industrial automation, and military applications.
Read more
Quick view

GE PMC-0247RC-282000 350-93750247-282000F Compact Intelligent PLC & I/O Module for GE PACSystems RX3i

Technical Specifications:
  • Function Type: This module serves as a processor or input/output (I/O) interface component within the turbine control system, responsible for signal processing, data acquisition, and command execution.
  • Processor and Memory: Equipped with a high-speed digital signal processor (DSP) and sufficient onboard memory to support real-time control algorithms, diagnostics, and firmware operations.
  • Communication Interface: Supports high-speed communication via Ethernet or fiber optic links, enabling integration with the central control system and other field devices using protocols such as Profibus, Modbus, or proprietary GE control networks.
  • I/O Support: Designed to interface with analog and digital signals from sensors and actuators, including temperature, pressure, speed, and valve position feedback.
Read more
Quick view