GE HE670ADC830 Analog Input Module
Product Overview
The GE HE670ADC830 is an analog input module designed for the GE Fanuc Field Control system. It functions as an interface for converting analog voltage signals from field sensors and transmitters into precise digital values for processing by a master Programmable Logic Controller (PLC). This module is suited for industrial automation tasks that require high-accuracy data collection, such as monitoring temperature, pressure, and flow.
GE DS200LDCCH1ALA Drive Control and LAN Communications Board
The GE DS200LDCCH1ALA is a sophisticated drive control and local area network (LAN) communications board from the Mark V Speedtronic series. It functions as a central processing hub within GE's DIRECTO-MATIC 2000 series drive cabinets, managing complex interactions between drive systems, motors, and I/O controls. The board integrates four dedicated microprocessors to handle control algorithms, communication protocols, and signal processing, making it an essential component for high-demand industrial automation and turbine control applications.
GE DS200DCFBG1BKC Power Supply Board
Product Overview
The GE DS200DCFBG1BKC is a power supply board engineered for the Mark V series of Speedtronic turbine control systems. This component is responsible for converting incoming AC power into stable DC voltage outputs that energize the system's control circuits, drive components, and cooling fans. Designed for high reliability in demanding industrial environments, it features integrated diagnostic indicators and comprehensive circuit protection to ensure continuous operation.
GE 369-HI-R-M-0-P-0-E Motor Management Relay
Product Overview
The GE 369-HI-R-M-0-P-0-E is a comprehensive microprocessor-based motor management relay from the GE Multilin 369 series. It is engineered to provide complete protection, monitoring, and control for three-phase medium-voltage and high-voltage induction motors in critical industrial applications. This relay combines multiple protective functions into a single device, safeguarding expensive motor assets against electrical and thermal faults while offering remote communication and advanced diagnostic capabilities.
GE IC694BEM331 RX3i Genius Bus Controller Module
The IC694BEM331 is a Genius Bus Controller (GBC) module manufactured by GE Fanuc (now Emerson Automation Solutions) for the PACSystems RX3i control platform . This module enables the RX3i controller to communicate with a wide range of industrial devices over the proprietary Genius serial bus network . It serves as the communication nexus between the central PLC and distributed field I/O stations, translating data and managing the high-speed serial link to equipment such as VersaMax I/O stations, Genius I/O blocks, Field Control stations, and Genius Handheld Monitors (HHM) .
GE IC693PBM200 PROFIBUS-DP Master Module
The IC693PBM200 is a PROFIBUS-DP Master communication module designed for the GE Fanuc Series 90-30 PLC system. It functions as the primary interface between the PLC and a PROFIBUS-DP fieldbus network, enabling high-speed data exchange with distributed field devices, remote I/O stations, drives, and other automation equipment. The module scans all configured slave devices, sending outputs and reading inputs, with support for up to 125 DP slaves and 244 bytes of input plus 244 bytes of output data per slave.
GE IC693MDL930 4 Amp Isolated Relay Output Module
Product Introduction
The IC693MDL930 is a discrete output module manufactured by GE Fanuc (now Emerson Automation Solutions) for the Series 90-30 Programmable Logic Controller (PLC) system. It provides 8 normally-open (Form A) relay circuits for controlling user-supplied output loads. Each output point is individually isolated from all other points, and each features a separate common power output terminal.
GE IC693CPU372 PLUS Central Processing Unit
Product Introduction
The IC693CPU372 is a high-performance central processing unit for the GE Fanuc Series 90-30 PLC system . This single-slot CPU serves as the core controller, executing user logic programs, processing I/O data, and managing network communications . It features an embedded enhanced Ethernet interface with two auto-sensing 10/100 Mbps RJ-45 ports, enabling direct TCP/IP communication with Series 90, PACSystems, and VersaMax PLCs, as well as host computers running CIMPLICITY software or programming tools . The built-in Ethernet switch supports daisy-chaining of Ethernet nodes, reducing the need for external network hardware .
GE IC693CMM311 Communications Coprocessor Module
Product Introduction
The IC693CMM311 is a Communications Coprocessor Module (CMM) manufactured by GE Fanuc (now Emerson Automation Solutions) for the Series 90-30 PLC system . It provides high-performance communication capabilities by offloading serial communication tasks from the main CPU, enabling efficient data exchange with external devices . The module features two serial ports: Port 1 is dedicated to RS-232, while Port 2 is configurable for RS-232 or RS-485 applications . An IC693CBL305 Wye cable is supplied with the module to separate the two ports from the single connector, simplifying field wiring .
GE IC693BEM331D Genius Bus Controller Module
Product Introduction
The IC693BEM331D is a Genius Bus Controller module from GE Fanuc, designed for the Series 90-30 Programmable Logic Controller (PLC) system. It provides the interface between the PLC and the Genius I/O bus, enabling high-speed serial communication and data exchange with up to 31 connected Genius I/O devices. This module allows the central controller to manage remote distributed I/O, including discrete, analog, and special-purpose field modules.
GE IC693ALG221J 4-Channel Analog Current Input Module
Product Introduction
The IC693ALG221J is an analog current input module designed for the GE Fanuc Series 90-30 PLC system . It provides four independent channels specifically optimized for 4–20 mA and 0–20 mA current loops, converting field signals from transmitters and sensors into digital data for the CPU . Typical applications include monitoring continuous industrial variables such as pressure, temperature, and flow .
GE IC693ACC302 Auxiliary Battery Module
Product Introduction The IC693ACC302 is an auxiliary battery module manufactured by GE Fanuc, designed to provide extended backup power for the volatile memory in PACSystems and Series 90-30 CPUs . It serves as a high-capacity alternative to standard memory backup batteries, ensuring that user programs and data are retained during power outages for significantly longer periods .
Technical Specifications Product Type: Auxiliary Battery Module
