GE IC695PSD040F
- Product Introduction: The IC695PSD040F is a 40-Watt DC-input power supply module designed for GE PACSystems RX3i universal backplanes, operating from a nominal 24 VDC input to deliver regulated +5.1 VDC and +3.3 VDC outputs for powering RX3i CPU, I/O modules, and internal circuits. It features front-panel LED status indicators, an on/off switch with a protective cover, and supports daisy-chaining up to two units for expanded capacity, optimized for industrial environments with DC power infrastructure.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single-slot 24 VDC input power supply module for RX3i universal backplane
- Input Voltage (Nominal): 24 VDC
GE IC695PSD040
- Product Introduction: The IC695PSD040 is a 40-Watt DC-input power supply module designed for GE PACSystems RX3i universal backplanes, operating from a nominal 24 VDC input to deliver regulated +5.1 VDC and +3.3 VDC outputs for powering RX3i CPU, I/O modules, and internal circuits. It features LED status indicators, on/off switch with protective cover, and supports daisy-chaining up to two units for expanded capacity, ideal for industrial environments with DC power infrastructure.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single-slot 24 VDC input power supply module for RX3i universal backplane
GE IC695PSA040
- Product Introduction: The IC695PSA040 is a 40-Watt universal power supply module for GE PACSystems RX3i controllers, converting 85-264 VAC or 100-300 VDC input into regulated +3.3 VDC, +5.1 VDC, and +24 VDC outputs. It powers RX3i backplane modules, CPU, I/O, and relay circuits, with front-panel LEDs for status monitoring, and works exclusively in RX3i universal backplanes (one module per backplane, no redundancy).
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: 40-Watt power supply module for RX3i PACSystem universal backplane
GE IC695PBM300
- Product Introduction: The IC695PBM300 is a single-slot PROFIBUS-DP master module for GE PACSystems RX3i controllers, enabling seamless integration of PROFIBUS-DP networks with RX3i systems. It connects up to 125 PROFIBUS-DP slaves, supports DP-V1 advanced messaging, Sync/Freeze modes, and field-upgradable firmware, designed for discrete and process automation requiring reliable industrial communication.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single-slot PROFIBUS-DP master communication module for RX3i universal backplane
GE IC695NIU001
- Product Introduction: The IC695NIU001 is a single - slot Ethernet Network Interface Unit for GE PACSystems RX3i controllers, enabling remote use of RX3i and Series 90 - 30 I/O on Ethernet networks. It works with the backplane - based Ethernet interface module IC695ETM001 for Ethernet communication, features two configurable serial ports (RS - 232/RS - 485), supports automatic data exchange via EGD, and offers local logic execution, data storage, and redundant controller compatibility.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single - slot Ethernet Network Interface Unit (ENIU) for RX3i PACSystem
GE IC695ETM001CA-ER
- Product Introduction: The IC695ETM001CA-ER is an enhanced dual-port Ethernet interface module for GE PACSystems RX3i controllers, offering advanced network redundancy, enhanced security, and extended temperature range, fully compatible with RX3i hot standby redundant systems (IC695RMX128) to ensure continuous network connectivity in mission-critical applications.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single-slot Ethernet interface module for RX3i universal backplane
GE IC695ETM001
- Product Introduction: The IC695ETM001 is a single - slot, dual - port Ethernet interface module for GE PACSystems RX3i controllers, connecting the controller to 10/100 Mbps Ethernet networks, supporting TCP/IP, SRTP, Modbus TCP, and EGD protocols, and featuring an embedded switch with auto - negotiation, crossover detection, and a Station Manager port for online configuration and monitoring.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single - slot Ethernet interface module for RX3i backplane
GE IC695CRU320-EN
- Product Introduction: The IC695CRU320-EN is a high-performance hot standby redundant CPU module in GE PACSystems RX3i platform, built with 1 GHz Intel Celeron-M processor, supporting dual-slot installation, seamless switchover between master and standby CPUs within 3.133 ms to 1 logic scan, and providing 64 MB battery-backed RAM and 64 MB non-volatile flash memory, ideal for mission-critical industrial automation systems requiring uninterrupted operation.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Processor: 1 GHz Intel Celeron-M 32-bit microprocessor
GE IC695CPU320HU
- Product Introduction: The IC695CPU320HU is a high-performance 32-bit PAC CPU module from GE Fanuc (now part of Emerson Automation) belonging to the PACSystems RX3i platform, designed for real-time control of industrial machines, processes, and material handling systems, supporting dual backplane for PCI and Series 90-30 serial bus compatibility, and enabling easy migration of existing Series 90-30 I/O while integrating advanced RX3i I/O.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now under Emerson Automation)
- Processor: 1 GHz Intel Celeron-M 32-bit microprocessor
GE IS200SCSAS1ADB
- Product Overview: A high-density analog I/O module in GE’s Mark VIe control system series, designed for precise measurement and control in industrial automation applications. It features 16 analog input channels for sensor signals (4–20mA, ±10V, thermocouple, RTD) and 8 analog output channels for actuator control (4–20mA, ±10V). The module integrates signal conditioning, isolation, and diagnostic circuits, with a backplane interface for ISBus communication. Conformal coating ensures reliability in harsh environments, while hot-swappable design minimizes maintenance downtime.
- Technical Specifications - Analog Inputs: 16 channels, configurable as 4–20mA (sinking/sourcing), ±10V, thermocouple (Type J/K/T/E/R/S/B/N), RTD (PT100/PT1000, 2/3/4-wire); 16-bit resolution; 10Hz–1kHz sampling rate; 250VAC channel-to-channel isolation
GE IS200ESYSH1AAA
Product Overview: A core system interface board for GE’s EX2100e Excitation Control and Mark VI Speedtronic turbine control systems, serving as the central hub for customer I/O, voltage/current measurement, and protection relay interfacing. It integrates isolation transformers for PT/CT inputs, analog/digital I/O circuits, trip relay outputs, and backplane communication interfaces. The board connects to HSSL/HSLA daughter terminal boards via six sub-D pin connectors, providing terminal access for field wiring. Conformal coating ensures reliability in harsh industrial environments, while hot-swappable design minimizes maintenance downtime.
GE IS200EPSMG2A
- Product Overview: A Group 2 exciter power supply module in GE’s EX2100 Excitation Control series, dedicated to converting 125VDC input from the EPDM power distribution module to regulated +5V, ±15V, +24V DC outputs for EX2100 regulator control systems. It integrates an IS200EPSDG_A daughter board for enhanced input voltage handling, creepage/clearance, and a dedicated fuse for DC link protection. The module includes a buck regulator and push-pull inverter with a high-isolation transformer, delivering isolated +70VDC contact wetting power and serving as the primary power source for C, M1, M2 controllers in Mark VI/VIe turbine control systems. Conformal coating ensures reliable operation in harsh industrial environments, making it a core component for excitation system power conversion and distribution.
