ABB

Technical Specifications

• Memory: 4 MB Flash PROM for firmware storage and 64 MB of SDRAM.
• Power Dissipation: Typical is 5.1 W; typical (including full supply to module bus and CEX bus) is 8.6 W.
• Current Consumption: Typical is 210 mA; maximum is 360 mA (excluding supply of module bus and CEX - bus).
• Power Input Connector: Four - pin screw connector: L +, L–, SA, and SB.
• Power Supply Requirements: Inputs L+ and L– are 24 V nominal, with a variation between 19.2 V DC and 30 V DC. Redundant power supply status inputs (SA, SB) have a max input voltage of 30 V, a min input voltage for high level of 15 V, and a max input voltage for low level of 8 V.
• Power Reservoir: The processor unit has an internal 5 - ms power reservoir for controlled power down.

Technical Specifications

• Brand: ABB
• Model: PM866AK01
• Part Number: 1SBH780000R0000
• Type: Industrial PLC Controller
• Product Origin: Switzerland
• Processor: 32-bit ARM Cortex-A9; some versions adopt MPC866 processor
• Clock Speed: 100 MHz; some versions are 133 MHz
• Memory: Up to 128 MB; some versions have 64 MB memory, with 51.389 MB available for application programs and 4 MB flash PROM for firmware storage
• Interfaces: Two RJ45 Ethernet ports (CN1, CN2), two RJ45 serial ports (COM3, COM4); COM3 is an RS-232C port with modem control signals, and COM4 is isolated; it also has Ethernet, PROFINET, Modbus, CANopen, and DeviceNet interfaces
• I/O Points: Up to 4096
• Power Supply: 24V DC (19.2-30V DC); power consumption at +24V is typically 210mA and maximum 360mA; power dissipation is 5.1W (maximum 8.6W); built-in backup lithium battery with a voltage of 3.6V
• Dimensions: 120mm x 120mm x 45mm
• Weight: 0.6kg
• Certifications: CE, UL, CSA
• Performance Parameters: 1000 Boolean operations take 0.09 milliseconds; maximum red switching time is 10 milliseconds; each controller can have 32 application programs, 64 programs per application program, 128 charts per application program, 32 tasks per controller, 32 different cycle times, and the cycle time per application program can be as low as 1 millisecond

Technical Specifications

• Brand: ABB
• Model: PM891K01 3BSE053241R1
• Series: ABB AC 800M high-performance controller series
• Processor: 32-bit MPC 8270 processor, with a clock frequency of 450MHz
• Memory: 256MB memory in total, of which 208.985MB is available for application use; integrated RAM (expandable); equipped with flash memory for storage
• Power Supply: 24V DC (19.2V - 30V DC), with optional redundant power supply; power consumption is 660/750mA at +24V
• Communication Interfaces: 2 RJ45 Ethernet ports (CN1, CN2) for connecting to the control network, 1 isolated RJ45 serial port (COM4) for configuration tools; supports communication protocols such as Profibus, Modbus, Ethernet/IP, OPC UA, MMS (Manufacturing Message Service), and IAC (Inter-Application Communication)
• Expansion Capability: The communication expansion bus (CexBUS) is installed to expand the on-board communication ports; the optical module bus can connect 7 clusters of S800 I/O units, with each cluster containing up to 12 units; supports redundant I/O modules
• Protection Level: IP20
• Operating Temperature: 0°C - 60°C
• Dimensions: Net depth/length 280mm, net height 105mm, net width 245mm
• Weight: Net weight 2.1kg
• Installation Method: DIN rail installation
• Compatibility: Applicable to 800xA and Advant Controller 800M systems

• The PM891K01 operates as a high-performance CPU within the AC 800M system, suitable for handling extensive control logic and data processing tasks.
• Supports multiple communication protocols including Ethernet/IP, Profibus-DP, and Modbus TCP, facilitating connectivity with other devices and systems within an industrial network.
• Equipped with sufficient memory to store large-scale applications, user programs, and historical data, ensuring efficient operation without frequent memory constraints.
• Capable of operating under industrial environmental conditions, featuring resistance to vibration, temperature fluctuations, and electrical noise.

• Measurement Type: The PNI800 could be designed for measuring parameters such as pressure, temperature, flow, or level, depending on its specific application. It is engineered to provide accurate and reliable measurements under challenging industrial conditions.
• Accuracy: Offers high accuracy to ensure dependable readings, critical for process control and safety.
• Communication Protocols: Supports standard communication protocols including HART, Profibus, Modbus, or Ethernet, enabling seamless integration with distributed control systems (DCS) and other plant networks.
• Power Supply Requirements: Operates on standard industrial power supplies, often featuring options for loop-powered devices or external power sources.
• Environmental Tolerance: Built to withstand harsh industrial environments, featuring resistance to temperature extremes, humidity, vibration, and electromagnetic interference.
• Display and User Interface: Equipped with an LCD display or LED indicators for status monitoring and easy configuration. Some models may offer touch screen interfaces or buttons for navigation through settings and diagnostics.

• Display: 5.4-inch TFT LCD with touchscreen functionality.
• Resolution: Designed for clear visualization of process data and graphical interfaces.
• Communication: Supports Profibus protocol for seamless integration with PLCs and other industrial devices.
• Interfaces:
  • RS-232 serial port for local configuration and debugging.
  • Bluetooth connectivity for wireless data exchange (in some configurations).
  • Additional communication cards (e.g., Ethernet) can be added via expansion slots.