Emerson PR6423/003-030 + CON021
Product Introduction:
Same measurement principle as Item 9 above, but the probe suffix
/003-030designates a 3 m or 5 m integral cable length (typically 5 m on -030 variants) between probe head and connector. This kit is selected when longer cable runs are needed between the probe location (inside bearing housing area) and the terminal box / preamp cabinet.
Emerson PR6423/000-111+CON021
Product Introduction:
A non-contact displacement/vibration measurement system compliant with API 670. The PR6423/000-111 8-mm diameter probe senses the distance to a ferromagnetic target (typically turbine shaft). The CON021 preamplifier converts the probe signal to a -24 V DC to 0 V DC (or -4 to -20 V) proportional output for the machinery protection system (MPS/TSI rack).
DEIF PPU-3
Product Name: DEIF PPU-3 (Power Plant Unit – GenSet Paralleling & Protection Unit) — Advanced Genset Controller
Product Introduction:
A marine- and industrial-grade genset controller for automatic start/stop, synchronization, load sharing, and protection of diesel/gas generator sets. Can operate standalone or as part of a DEIF power management system (PMS) for multi-genset or mains/genset transition schemes.
Bosch Rexroth PPC-R22.1N-T-Q2-G2-NN-FW
Product Name: Bosch Rexroth PPC-R22.1N-T-Q2-G2-NN-FW IndraMotion MTX / PPC-R Series Multi-Axis Motion Controller
Product Introduction:
An industrial PC-based multi-axis motion controller for demanding CNC and packaging applications. It executes real-time motion control tasks (interpolation, camming, electronic gearing) and communicates with IndraDrive / EcoDrive servo amplifiers via SERCOS or real-time Ethernet.
Atlas Copco PME-1802-A-CD2
Product Name: Atlas Copco / Tetra Pak PME-1802-A-CD2 DC Motor / Armature Controller (originally Danaher Motion / Tetra Pak OEM part)
Product Introduction:
A compact DC armature controller designed for small DC servomotors or actuator drives, commonly found in Tetra Pak filling machines. Provides regulated DC armature voltage with adjustable speed reference and current limiting.
LTi DRIVES PM-E40.2DRA054P
Product Name: LTi Motion (now KEB) PM-E40.2 DRA054P Servo Drive / Inverter Module — part of C-Line / Movitrac series family
Product Introduction:
A three-phase regenerative-capable servo / inverter power module from LTi Motion's modular drive system, designed to supply and control permanent magnet synchronous motors (PMSM) and induction motors in multi-axis configurations. Typically used with a central control unit (CCU) or motion controller.
ProSoft PLX32-MBTCP-SIE
Product Name: ProSoft Technology PLX32-MBTCP-SIE Modbus TCP/IP to Siemens S7 Industrial Ethernet Communication Gateway
Product Introduction:
An industrial protocol gateway that enables bidirectional data exchange between Modbus TCP devices (Client and/or Server) and Siemens S7 PLCs (S7-300/400/1200/1500) over Siemens Industrial Ethernet. Eliminates need for custom drivers in mixed-vendor automation networks.
Alstom PIB102A 3BEB0180A
Product Introduction:
The PIB102A / 3BEB0180A is a digital input interface board for the Alstom Alspa C300 / Advant DCS platform. It accepts 16 isolated 24 V DC digital inputs (dry or wet contacts) from field devices such as limit switches, breaker aux contacts, and pushbuttons, and transfers the status to the control processor via the backplane bus.
Alstom PIB100G
Product Name: Alstom PIB100G (3BEE0226) Process Interface Board / I/O Signal Conditioning Card
Product Introduction:
This is a high-density process signal interface PCB designed for ABB Advant OCS / Alstom Alspa P320 DCS systems. It provides electrical isolation, buffering, and signal conditioning between field I/O wiring (analog or digital) and the system backplane, protecting the CPU from transient surges and ground loops.
Metso PDP401
Product Introduction:
The Metso PDP401 is a microprocessor-based industrial automation device used either as a smart valve positioner for pneumatic control valves in process plants, or as a compact Distributed Processing Unit (DPU) in Metso DNA / Valmet DNA distributed control systems. It converts a 4–20 mA analog control signal into a precise pneumatic output to position the valve, or performs real-time I/O scanning, logic, and communication in a DCS node.
Honeywell R7247C1001
Product Name: Honeywell R7247C1001 Solid-State UV Flame Amplifier with Dynamic Self-Check
Product Brief: Plug-in flame amplifier module that processes signals from a Honeywell C7012E/F or C7061A/F ultraviolet flame detector and drives the flame relay in Burner Management Systems (BMS) such as R4140, R4075, BC7000. Features dynamic self-check to verify amplifier and sensor integrity during burner operation.
NI PXIe-8840
Product Name: NI PXIe-8840 PXI Express Embedded Controller (Intel Core i5-4400E or Core i7-5700EQ options)
Product Brief: General-purpose embedded controller for PXI Express systems. Offers dual-core i5 or quad-core i7 options, USB 3.0, Gigabit Ethernet, and supports Windows / NI Linux Real-Time. Designed for test, measurement, and DAQ applications requiring moderate to high CPU throughput.
