Bachmann MX213
Brief Introduction:
The MX213 is the core CPU module of Bachmann's M1 modular PLC system. It combines an x86-compatible processor, local digital I/O, Ethernet/CAN/serial communications, and expansion bus for up to 80 I/O points. It is programmed in IEC 61131-3languages and C/C++, suitable for medium-complexity machine and process control.
Hirschmann MWS10A
Brief Introduction:
The Hirschmann MWS10A is a compact managed industrial Ethernet switch belonging to Hirschmann's MICE/MS family, providing Layer 2 switching with redundancy protocols (RSTP, MRP, HSR/PRP on higher models), suitable for plant-floor networking, substation automation (IEC 61850), and process control.
Motorola MVME2305-900
Brief Introduction:
The MVME2305-900 is a rugged 6U VME64x single board computer based on the PowerPC or MC68EC040 architecture (depending on batch/revision), designed for mission-critical real-time applications in defense, aerospace, power SCADA, and industrial automation. It features VMEbus master/slave capability, PMC expansion slots, dual Ethernet, and battery-backed SRAM for non-volatile parameter storage.
Wärtsilä PDM-20110V PAEE045083
Product Introduction:
The Wärtsilä PDM-20110V is a protective relay and monitoring device used within Wärtsilä automation & electrical packages for marine vessels and land-based power plants. It provides comprehensive generator/feeder protection functions (overcurrent, earth fault, reverse power, under/over voltage, frequency, etc.) and feeds status/analog values into the Wärtsilä DAM (Data Acquisition & Monitoring) or ship automation system via serial link.
GE PCIE-5565PIORC-10000
Product Introduction:
The PCIE-5565PIORC is a reflective memory (also called shared memory or mirrored memory) node card for building deterministic, low-latency distributed real-time networks. Data written to the local SDRAM by the host CPU is automatically broadcast over fiber-optic links to all other nodes in the reflective memory ring/star, appearing in their local memory without software intervention. This creates a software-transparent shared memory space across multiple computers — essential for hardware-in-the-loop (HIL) simulation, flight test, and synchronized process control.
NI PCI-6033E
Product Introduction:
The PCI-6033E is a member of NI's E-Series multifunction DAQ family. It plugs into a standard 32-bit PCI slot in a desktop PC or industrial computer and provides high-resolution analog input acquisition, digital I/O lines, and counter/timer functions. It is widely used for laboratory measurement, production test, and OEM data logging.
Saia PCD3.M5340
Product Introduction:
The PCD3.M5340 is a mid-range programmable logic controller CPU from the Saia PCD3 family (now part of Honeywell Process Solutions / formerly SBC). It features an integrated Ethernet port for programming, web visualization, and peer-to-peer communication, plus onboard RS-232 and RS-485 ports. It supports up to 1,023 I/O points and expansion via PCD3 I/O modules.
PACIFIC SCIENTIFIC PC834-001-T
Product Introduction:
The PC834-001-T is a digital brushless servo drive with built-in indexing capability, designed to control 3-phase permanent magnet (PM) brushless servo motors. It combines a high-bandwidth DSP-based control loop with programmable motion indexer functions, supporting both analog torque/speed command and step/direction or index positioning modes.
BRAD COMMUNICATIONS PC104-DPIO
Product Introduction:
The PC104-DPIO is an industrial-grade communication interface card conforming to the PC/104 stackable bus standard. It integrates a full PROFIBUS-DP protocol stack (DP-V0/V1/V2) and can operate either as a DP-Master (Class 1 Scanner) or DP-Slave, enabling embedded PCs or industrial computers to communicate directly with PROFIBUS field devices such as drives, remote I/O, and PLCs.
Socapel PAM-R1N-H8F-AP-P V10700
Product Introduction:
Manufactured by Socapel (part of Atlas Copco Group), the PAM-R1N-H8F-AP-P is a high-performance motion control module designed for coordinated multi-axis servo applications. It executes trajectory planning, interpolation, and closed-loop position/velocity control at the hardware level, offloading the master PLC. Typically deployed in packaging machinery, CNC, and high-speed assembly lines.
FOXBORO P0926AH-B
Product Introduction:
The P0926AH-B is a Field Bus Module (FBM) belonging to the Foxboro I/A Series distributed control system. It provides eight galvanically isolated analog input channels accepting standard 4–20 mA process signals and simultaneously acting as a HART communication host, allowing the DCS to read digital HART data (PV, SV, TV, device status) from smart field transmitters.
ICS Triplex P153DL002
Product Introduction:
This module is part of the Schneider Electric Triconex safety-instrumented system (SIS) I/O family. It uses Triple Modular Redundancy (TMR) architecture where three independent processors generate output signals that are hardware-voted (2oo3 — two-out-of-three) before reaching the field terminals. Designed for Emergency Shutdown (ESD), Fire & Gas (F&G), and critical interlock applications in high-hazard process industries.
