Densan DVE-102A - Image 1
Click to enlarge
Densan DVESH7750
Densan DVESH7750
Back to products
Densan DVE-440(9214)
Densan DVE-440(9214)

Densan DVE-102A

Product Name
Densan DVE-102A industrial graphic board or generic circuit board, depending on supplied revision.
Product Overview
Densan DVE-102A appears in two verified surplus configurations. One listing describes a Densan graphic board with 128 KB SRAM. A separate industrial listing describes DVE-102A with alternative number 9327A as a used circuit board. Confirm the exact sticker, firmware label and connector layout before defining the board as a graphics module or a general-purpose control card.
Category:
Description
Technical Specifications
  • Graphic-board configuration: 128 KB SRAM memory.
  • General circuit-board configuration, 9327A: approximately 12 x 9 x 2 inches physical envelope, 2 lbs shipping weight.
  • Bus and connector details: confirm from board silkscreen; Densan VME or proprietary industrial bus according to the host system.
  • Display resolution, refresh rate and interface signaling for the graphic variant are not included in retrieved public documentation.
Key Features
  • Compact industrial PCB suitable for legacy factory systems.
  • SRAM-based graphic buffer for frame storage where the graphic revision is installed.
  • Direct replacement support within systems that originally shipped with DVE-102A/9327A.
Application Scenarios
  • Legacy industrial workstations and operator graphic terminals.
  • Retrofit of obsolete Densan-based automation controllers.
  • Spare-board support for FA equipment, test systems and scientific instruments.
Performance Parameters
  • Memory bandwidth and pixel throughput are determined by the 128 KB SRAM organization in the graphic variant.
  • For the 9327A circuit-board variant, performance values depend on the host backplane firmware and connected I/O.
Material Composition
  • Rigid multilayer FR4 laminate.
  • Surface-mount memory devices, graphic controller or generic logic ICs, connectors and passive components.
  • Anti-tarnish connector plating according to the original manufacturing revision.
Structural Characteristics
  • Edge or header connectors for backplane or cable I/O.
  • Mounting holes aligned with the original chassis or VME bracket.
  • Component layout separated into memory, controller and interface sections.
Working Principle
The graphic variant stores display data in onboard SRAM, processes commands from the host bus, and drives the connected monitor or industrial display interface. The general circuit-board variant processes control or signal data according to the original firmware loaded on its logic devices.
Installation Requirements
  • Power down the host system before installing or replacing the board.
  • Match the connector type, jumper setting and firmware revision to the existing controller.
  • Verify mechanical clearance in the original card cage or enclosure.
  • For graphic use, confirm monitor interface compatibility before system startup.
Usage Precautions
  • Handle only with ESD protection because SRAM and graphic controller devices are static sensitive.
  • Do not mix DVE-102A graphic boards with 9327A generic circuit boards without confirming electrical interchangeability.
  • Inspect for damaged connectors, burned components and corroded contacts before power-up.
  • Store spare boards in anti-static bags with desiccant in a temperature-controlled room.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Densan DVE-102A”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

AMAT 0100-71267 Semiconductor Control Module

echnical Specifications:
  • Compatibility: Designed specifically for integration with Applied Materials' semiconductor processing systems.
  • Electrical Characteristics: Details about voltage requirements, current ratings, and power consumption would be specified in technical documentation tailored to its specific application within the system.
  • Physical Attributes: Dimensions and weight suitable for installation within semiconductor manufacturing equipment, ensuring compatibility with existing hardware and facilitating ease of replacement or maintenance.
  • Environmental Tolerance: Engineered to withstand the demanding conditions inside semiconductor fabrication facilities, including resistance to electromagnetic interference, temperature variations, and particulate matter.
Read more
Quick view

CCC TIOC-555HD

Technical Specifications

There is currently no specific and detailed technical specification information available for the CCC TIOC - 555HD. However, based on similar products such as the CCC IOC - 555 - D, it may have the following characteristics:
  • Communication Interface: May support RS - 485 communication.
  • I/O Channels: It is possible to have multiple digital inputs and outputs, as well as analog inputs and outputs. For example, the IOC - 555 - D has 8 digital inputs, 4 digital outputs, 2 analog inputs, and 2 analog outputs.
Read more
Quick view

KEBA FB201 — Comprehensive Data Sheet

Procurement Guidance

  1. Compatibility Notes
    • Verify suffix codes (e.g., FB201/xxx) for I/O capacity and environmental ratings .
    • Requires KEBA RobotStudio or ECL-3 software for configuration .
  2. Critical Accessories
    • Backplane Adapter (e.g., SDCS-PIN-24) for PLC integration .
    • IP65 Housing for harsh environments (e.g., oil rigs, substations) .
  3. Avoid Mismatches
    • Servo drives → Refer to KEBA KeDrive.
    • HMIs → Use KEBA ETT Series.
Read more
Quick view

KONGSBERG MRU-E-JB3

Technical Specifications:
  • Measurement Axes: 6 DOF (Degrees of Freedom) - heave, surge, sway, roll, pitch, and yaw
  • Accuracy: High accuracy across all axes with minimal latency
  • Update Rate: Configurable up to 100 Hz for real-time applications
  • Operating Voltage: Typically 12 to 36 VDC
  • Power Consumption: Low power consumption suitable for extended operation
  • Operating Temperature: -40°C to +70°C, ensuring performance in extreme environments
  • Storage Temperature: -50°C to +85°C
  • Humidity Range: 0% to 100% relative humidity, waterproof design
  • Environmental Protection: IP68 rated for underwater use and protection against dust and water ingress
  • Communication Interfaces: RS-232, RS-422, Ethernet, NMEA 0183, and others depending on configuration
Read more
Quick view

MOLEX SST-PFB-SLC

Product Introduction

The MOLEX SST-PFB-SLC is a Profibus scanner module designed for use with the Allen-Bradley SLC 500 controller series. It is manufactured by SST, a brand under Molex. The module enables communication between an SLC processor (SLC 5/03 or later) and DP remote I/O devices on a Profibus network, acting as a Profibus DP remote I/O scanner.
Read more
Quick view

Monico CDL-MCLE-FWM

Technical Specifications
  • Input Protocol: Caterpillar® CDL (Cat Data Link).
  • Output Protocols: Supports Modbus (RTU/TCP), CANopen, and other industrial protocols via configurable modules.
  • Data Polling Rate: High-speed, multi-threaded polling at 20–60 parameters per second for real-time monitoring.
  • Pre-configured Registers: Over 400 CDL-based registers for rapid deployment, with customizable mapping for specific applications.
Read more
Quick view

SAACKE FSC-01

Technical Specifications:
  • Supply Voltage: 24 V DC (typical), with options for 110–230 V AC in certain configurations
  • Power Consumption: Low power draw, optimized for continuous operation
  • Operating Temperature: -10°C to +55°C
  • Storage Temperature: -25°C to +70°C
  • Humidity Range: 5% to 95% relative humidity, non-condensing
  • Protection Rating: IP20 (suitable for indoor panel mounting)
  • Input Compatibility: Accepts signals from flame detectors including UV, IR, and ionization sensors
  • Output Relays: Equipped with safety-rated relay outputs for burner activation, alarm signaling, and system shutdown
Read more
Quick view

TOSHIBA GBU648E-S

  • Slot Capacity: Supports up to 8 modules, allowing flexible configuration with TOSHIBA’s EX10 series components (e.g., power supplies, CPUs, I/O units).
  • Power Supply Compatibility: Works with modules like PS261 (power supply) and PU11A (CPU), ensuring stable energy distribution and control logic execution.
  • Communication Modules: Integrates with Profibus DP modules (e.g., GPF611-S) for seamless connectivity with field devices, enabling real-time data exchange in industrial networks.
  • Analog/Digital Modules: Compatible with GAD668-S (analog input) and GDA664-S (analog output) modules, supporting high-precision signal processing for sensors and actuators.
  • Physical Design: Compact, rack-mounted structure optimized for space efficiency in control panels.
Read more
Quick view