Pacific LA23GCKC-1Y - Image 1
Click to enlarge
HP L2738
HP L2738
Back to products
Pacific LA23GCKC-P500A
Pacific LA23GCKC-P500A

Pacific LA23GCKC-1Y

Product Name​
Pacific Scientific LA23GCKC-1Y hybrid stepping motor, NEMA 23 family.
Product Introduction​
LA23GCKC-1Y is an industrial hybrid stepper motor in the Pacific Scientific LA23 series. It converts digital step pulses into precise incremental rotor motion for positioning systems that require repeatable angle control without closed-loop feedback.
Category:
Description
Technical Specifications​
Step angle 1.8°, 200 full steps/revolution. Frame size NEMA 23, approximately 47.6 mm to 60 mm square depending on stack length. Holding torque configuration-dependent; distributor data list ranges from about 0.65 Nm to 2.3 Nm and separate listings near 1.5 Nm to 1.8 Nm for specific windings. Rated current per phase around 3.2 A to 6.4 A depending on winding; other LA23 listings show 2.8 A with higher peak drive. Supply/drive voltage commonly 24 V to 48 V DC for driver-based systems; some hybrid applications use 18 V to 45 V DC. Protection rating IP65 on sealed variants. Operating temperature approximately -20 °C to 55 °C per steering-data listings.
Function Features​
Open-loop position control with high repeatability. Low resonance hybrid rotor design. Compatible with microstepping drives for smoother motion. Incremental step command supports PLC, CNC and standalone indexer integration.
Structure Characteristics​
Hybrid construction combines permanent-magnet rotor and variable-reluctance stator. Multi-pole laminated stator with two or more phases, precision machined shaft, ball bearing support, encoder/precision feedback option on configured versions, sealed housing and industrial connector option.
Working Principle​
The driver energizes stator phases in sequence. The magnetic field interacts with the permanent-magnet rotor, producing torque that moves the rotor one step per commutation. Reducing or microstepping the phase current divides each 1.8° step into smaller increments and lowers vibration.
Installation Requirements​
Mount on flat machining surface using standard NEMA 23 bolt pattern. Align coupling or belt pulleys to avoid radial/shaft-side load excess. Use matched Pacific/third-party microstepping drive set to the motor phase current. Shield motor and encoder cables separately from power cables.
Usage Precautions​
Set drive current to the named winding rating; excess current causes overheating and demagnetization risk. Avoid sustained holding current above rating in poorly ventilated enclosures. Verify IP65 sealing before washdown use. Check step-angle, inductance and inertia compatibility with the load before commissioning.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Pacific LA23GCKC-1Y”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Amat 0010-44213

  • Precision Performance: Engineered for high-precision control, the AMAT 0010-44213 meets the stringent requirements of semiconductor manufacturing.
  • Environmental Resistance: Operates reliably in high-temperature and high-pressure environments, withstanding harsh industrial conditions.
  • Compatibility: Seamlessly integrates with various semiconductor devices, lithography machines, plasma etching equipment, and other advanced material processing technologies.
  • Interface and Control: Effectively interfaces with AMAT’s equipment modules and control systems, ensuring collaborative operation across the entire production line.
Read more
Quick view

AMAT 0100-71267 Semiconductor Control Module

echnical Specifications:
  • Compatibility: Designed specifically for integration with Applied Materials' semiconductor processing systems.
  • Electrical Characteristics: Details about voltage requirements, current ratings, and power consumption would be specified in technical documentation tailored to its specific application within the system.
  • Physical Attributes: Dimensions and weight suitable for installation within semiconductor manufacturing equipment, ensuring compatibility with existing hardware and facilitating ease of replacement or maintenance.
  • Environmental Tolerance: Engineered to withstand the demanding conditions inside semiconductor fabrication facilities, including resistance to electromagnetic interference, temperature variations, and particulate matter.
Read more
Quick view

DEIF DLQ144-PC-NB

Technical Specifications:

  • Supply Voltage: 24 V DC (standard industrial voltage)
  • Power Consumption: Low consumption suitable for energy-efficient applications
  • Operating Temperature: -25°C to +70°C, ensuring performance in diverse environments
  • Storage Temperature: -40°C to +85°C
  • Humidity Range: 5% to 95% relative humidity, non-condensing
  • Communication Protocols: Supports Modbus RTU, Modbus TCP, and other standard protocols for integration with SCADA systems
  • Dimensions (WxHxD): Compact design suitable for mounting in switchgear cabinets or control panels
  • Certifications: CE, UL, and other relevant industry standards
Read more
Quick view

EATON XC-CPU202-EC4M-8DI-6DO-XV

  • Power Supply: 24 V DC, with an input power of 33 W and a supply voltage range of 20.4 - 28.8 V DC.
  • Dimensions: Length/Depth 100 mm, Height 100 mm, Width 60 mm.
  • Weight: 0.25 kg.
  • Processor: ARM 532 MHz.
  • Memory: 4 MB.
  • I/O Configuration: 8 digital inputs (DI) and 6 digital outputs (DO).
  • Communication Interfaces: Ethernet (100 Base - TX/10 Base - T), RS 232, CAN.
  • Certifications: EN 50178, IEC/EN 61131 - 2, EAC.
  • Protection Level: IP20.
  • Ambient Operating Temperature: 0 °C - 55 °C.
  • Ambient Storage Temperature: - 25 °C - 70 °C.
Read more
Quick view

MOLEX SST-PFB-SLC

Product Introduction

The MOLEX SST-PFB-SLC is a Profibus scanner module designed for use with the Allen-Bradley SLC 500 controller series. It is manufactured by SST, a brand under Molex. The module enables communication between an SLC processor (SLC 5/03 or later) and DP remote I/O devices on a Profibus network, acting as a Profibus DP remote I/O scanner.
Read more
Quick view

TOSHIBA GBU648E-S

  • Slot Capacity: Supports up to 8 modules, allowing flexible configuration with TOSHIBA’s EX10 series components (e.g., power supplies, CPUs, I/O units).
  • Power Supply Compatibility: Works with modules like PS261 (power supply) and PU11A (CPU), ensuring stable energy distribution and control logic execution.
  • Communication Modules: Integrates with Profibus DP modules (e.g., GPF611-S) for seamless connectivity with field devices, enabling real-time data exchange in industrial networks.
  • Analog/Digital Modules: Compatible with GAD668-S (analog input) and GDA664-S (analog output) modules, supporting high-precision signal processing for sensors and actuators.
  • Physical Design: Compact, rack-mounted structure optimized for space efficiency in control panels.
Read more
Quick view

XP POWER F8B6D4A3G3

Technical Specifications

  • Output Characteristics: It is a quad - output power supply, but specific output voltage and current values are not clearly provided in the existing information.
  • Dimensions: Approximately 15 × 11 × 7 inches (LxWxH).
  • Weight: About 8 lbs.
Read more
Quick view

ygo 7702 8070-0102-35

  • Laser Type: Helium - neon laser
  • Wavelength: 633 nm
  • Output Power: > 400 µW
  • Beam Diameter: 3 mm or 6 mm
  • Usable Beam Length: 2 m
  • Beam Pointing Stability: < 0.1 arc sec/°C
  • Operating Temperature: 10 - 30 °C
  • Vacuum Wavelength Stability: 0.01 ppm/24 hour
  • Mounting Type: May have different mounting options, such as with plastic mounting feet.
  • Weight: Approximately 5.5 kg (for some models of the 7702 laser head)
Read more
Quick view