NSK ESA-1010A35-211 - Image 1
Click to enlarge
Woodward EGCP-38406-113
Woodward EGCP-38406-113
Back to products
Yaskawa CVSR-404HCODENO71415-04051
Yaskawa CVSR-404HCODENO71415-04051

NSK ESA-1010A35-211

Product Name: Megatorque ESA35 Servo Driver Unit Product Introduction: This is a dedicated servo driver unit for NSK Megatorque series direct-drive hollow-shaft torque motors, delivering high-precision rotary positioning and torque control for advanced automation applications. Technical Specifications:

  • Matched Motor: RS1010FN001 Megatorque motor
Category:
Description
  • Maximum Stall Torque: 137 Nm (200 V supply) / 114 Nm (100 V supply)
  • Maximum Output Torque: 147 Nm
  • Resolver Resolution: 614,400 pulses per revolution
  • Control Resolution: 10-bit / 12-bit switchable
  • Control Power Supply: 24 V DC Functional Features:
  • Proprietary disturbance observer and feed-forward control achieves 1 ms settling time
  • Built-in positioning controller enables standalone operation without upper controller
  • Analog monitor output for speed, torque and position error measurement
  • RS-232C and USB ports for parameter setup and diagnostics
  • LED status indicators for operational state monitoring Application Scenarios:
  • Semiconductor manufacturing equipment
  • Precision rotary tables and indexers
  • Robot joint actuators
  • Electronic component inspection systems
  • High-precision positioning platforms Structural Features:
  • Compact metal housing with rear mounting holes
  • Front-panel 7-segment LED display
  • Separate connectors for main power, control power and motor feedback Installation Requirements:
  • Mount on flat surface or use optional front mounting bracket
  • Use specified motor and resolver cables only
  • Route power wiring separately from signal cables for noise immunity Usage Notes:
  • Commission using NSK Handy Terminal or dedicated PC configuration software
  • Perform auto-tuning to optimize performance for specific load characteristics
  • Do not operate the motor beyond rated torque and speed limits
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “NSK ESA-1010A35-211”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Amat 0010-44213

  • Precision Performance: Engineered for high-precision control, the AMAT 0010-44213 meets the stringent requirements of semiconductor manufacturing.
  • Environmental Resistance: Operates reliably in high-temperature and high-pressure environments, withstanding harsh industrial conditions.
  • Compatibility: Seamlessly integrates with various semiconductor devices, lithography machines, plasma etching equipment, and other advanced material processing technologies.
  • Interface and Control: Effectively interfaces with AMAT’s equipment modules and control systems, ensuring collaborative operation across the entire production line.
Read more
Quick view

AMAT 0100-71267 Semiconductor Control Module

echnical Specifications:
  • Compatibility: Designed specifically for integration with Applied Materials' semiconductor processing systems.
  • Electrical Characteristics: Details about voltage requirements, current ratings, and power consumption would be specified in technical documentation tailored to its specific application within the system.
  • Physical Attributes: Dimensions and weight suitable for installation within semiconductor manufacturing equipment, ensuring compatibility with existing hardware and facilitating ease of replacement or maintenance.
  • Environmental Tolerance: Engineered to withstand the demanding conditions inside semiconductor fabrication facilities, including resistance to electromagnetic interference, temperature variations, and particulate matter.
Read more
Quick view

CCC IOC-555-D 17-550555-001 Simplex I/O Card / Communication Control Board

Technical Specifications:
  • The module offers 16 serial input/output channels.
  • It integrates a processor, memory, and I/O interfaces into a compact form factor suitable for embedded systems.
  • It supports high computing performance with low power consumption characteristics.
  • Storage options include flash memory and RAM for storing the operating system, applications, and data.
Read more
Quick view

CCC TIOC-555HD

Technical Specifications

There is currently no specific and detailed technical specification information available for the CCC TIOC - 555HD. However, based on similar products such as the CCC IOC - 555 - D, it may have the following characteristics:
  • Communication Interface: May support RS - 485 communication.
  • I/O Channels: It is possible to have multiple digital inputs and outputs, as well as analog inputs and outputs. For example, the IOC - 555 - D has 8 digital inputs, 4 digital outputs, 2 analog inputs, and 2 analog outputs.
Read more
Quick view

CUTLER HAMMER JD3250F – Industrial Molded Case Circuit Breaker Frame

Technical Specifications • Voltage Ratings: 600 VAC, 250 VDC • Current Rating: 250 A (frame only; trip unit ordered separately) • Poles: 3 • Interrupting Capacity: 65 kA @ 240 VAC / 35 kA @ 480 VAC / 25 kA @ 600 VAC • Trip Functions: LI (Long-Time & Instantaneous) via field-installable trip units • Mounting: Bolt-on or plug-on; suitable for reverse feed • Standards: UL 489, CSA, IEC 60947-2 • Dimensions: 4.13" × 10" × 4.06" (H×W×D) • Weight: ~3.5 kg (frame only)
Read more
Quick view

Elmo G-TUB30480ERSS0

  • Rated Voltage: 480 VAC
  • Rated Current: 30 A
  • Continuous Power: Up to 25 kW
  • Communication Interfaces: Ethernet, CANopen, RS232, EtherCAT, etc.
  • Feedback Types: Encoder, resolver, Hall sensor (depending on the model)
  • Operating Temperature Range: - 40°C to +70°C (industrial - grade)
  • Protection Level: IP20 or higher (depending on the model)
  • Installation Method: Rack - mount, DIN - rail mount (depending on the model)
Read more
Quick view

KONGSBERG MRU-E-JB3

Technical Specifications:
  • Measurement Axes: 6 DOF (Degrees of Freedom) - heave, surge, sway, roll, pitch, and yaw
  • Accuracy: High accuracy across all axes with minimal latency
  • Update Rate: Configurable up to 100 Hz for real-time applications
  • Operating Voltage: Typically 12 to 36 VDC
  • Power Consumption: Low power consumption suitable for extended operation
  • Operating Temperature: -40°C to +70°C, ensuring performance in extreme environments
  • Storage Temperature: -50°C to +85°C
  • Humidity Range: 0% to 100% relative humidity, waterproof design
  • Environmental Protection: IP68 rated for underwater use and protection against dust and water ingress
  • Communication Interfaces: RS-232, RS-422, Ethernet, NMEA 0183, and others depending on configuration
Read more
Quick view

ygo 7702 8070-0102-35

  • Laser Type: Helium - neon laser
  • Wavelength: 633 nm
  • Output Power: > 400 µW
  • Beam Diameter: 3 mm or 6 mm
  • Usable Beam Length: 2 m
  • Beam Pointing Stability: < 0.1 arc sec/°C
  • Operating Temperature: 10 - 30 °C
  • Vacuum Wavelength Stability: 0.01 ppm/24 hour
  • Mounting Type: May have different mounting options, such as with plastic mounting feet.
  • Weight: Approximately 5.5 kg (for some models of the 7702 laser head)
Read more
Quick view