TRICONEX 9662‑810

Technical Specifications:

• It is designed for high availability and fault tolerance, ensuring continuous operation even in the event of hardware failures.
• The system supports safety integrity levels up to SIL 3 according to IEC 61508, making it suitable for critical safety applications.
• It operates with a triple modular redundant (TMR) architecture where three independent systems process data simultaneously and compare results to ensure accuracy and reliability.

• Processor and Memory Parameters
  • It is equipped with a 32-bit Motorola MPC860 processor running at a clock speed of 50 MHz, which supports real-time operating systems and efficiently executes complex control logic.
  • It is configured with 16 MB of non - battery backed DRAM, 32 KB of battery backed SRAM, and 6 MB of flash PROM, which can store a large number of control programs and real-time operation data stably.
• Communication Parameters
  • It uses the TriBus communication bus with a data transmission rate of 25 Mbps. The bus is equipped with 32-bit CRC protection and 32-bit DMA, and the communication part is fully isolated to ensure secure and stable data transmission.
  • It supports multiple communication protocols such as Modbus, Modbus TCP/IP, and Ethernet/IP, and is also compatible with communication interfaces like RS - 232/422/485 to achieve seamless connection with various industrial devices and systems.

• Input and Signal Parameters
  • It supports 24V AC/DC input voltage, with a recommended input voltage range of 20 - 42.5V DC and a maximum allowable voltage of 42.5V AC/DC.
  • It is configured with 32 input channels, which are grouped into commoned units of 8 channels each. The input frequency is 47 - 63Hz for AC 24V and 50Hz for DC 24V, with a millisecond-level response time to capture field signal changes rapidly.
  • The point isolation voltage reaches 1500V DC, which effectively isolates external electromagnetic interference and ensures the accuracy and stability of input signals.
• Power and Physical Parameters
  • It uses a 24V DC power supply and has a power consumption of less than 5W, which matches the power configuration of most industrial control systems.
  • It is designed for 19-inch rack installation, with dimensions of 150mm in width, 80mm in height and 50mm in depth. Its actual weight is 4 kilograms, and the transport weight is 10.5 kilograms.

• • Electrical Parameters
    • The nominal output voltage is 120 VDC, with a voltage range of 90 - 150 VDC and a maximum withstand voltage of 160 VDC. The typical voltage drop of the module is less than 1.5 V, and the power module load is less than 10 watts.
    • Each output point has a maximum current of 0.8 A, a surge current of 4 A within 10 milliseconds, a minimum required load current of 30 mA, and a maximum load leakage current of 4 mA.
    • The field terminal is equipped with a 1 A fast - acting fuse, and the point isolation voltage can reach 1500 VDC / 2500 VDC, which can effectively isolate electrical interference.
  • Physical and Indicator Parameters
    • The module weighs 5000 grams, and its shell adopts a steel - blue robust structure, which can adapt to the installation and use of various industrial control cabinets.
    • It is equipped with multiple diagnostic indicators, including pass, fault, active and power indicators for overall module status, as well as an independent load indicator for each output point, which can directly reflect the working state of the module and each output point.