Emerson 1X00102H01

Technical Specifications:

• Manufacturer: Emerson
• Part Number: 1X00102H01
• AC Input Voltage: 90‑260 VAC 50/60 Hz
• DC Output Rails: +5 V, +12 V, +24 VDC
• Operating Temperature: 0 °C ~ +60 °C
• Storage Temperature: ‑40 °C ~ +85 °C
• Relative Humidity: 5%‑95% RH, non‑condensing
• Shock Resistance: 10 g, 11 ms half‑sine wave
• Vibration Resistance: 1 mm peak‑to‑peak 2‑13.2 Hz, 0.7 g 13.2‑150 Hz
• Weight: 431 g
• Dimension: 127 mm ×89 mm ×13 mm

Functional Features:

• Hot‑swap support, can be replaced without shutting down DCS main‑system
• Multi‑level over‑voltage, over‑current, short‑circuit protection circuit
• Built‑in fault diagnosis circuit, output status indicator LED
• Full electrical isolation between input side and DCS back‑plane bus
• Perfect compatibility with Ovation series controller and I/O carrier
• Modular cabinet‑card installation structure, convenient for maintenance and fault isolation

Application Scenarios:

• Thermal power plant DCS control cabinet power supply distribution
• Oil‑gas process control system Ovation DCS cabinet
• Chemical industry large‑scale distributed control system
• Legacy Ovation system spare‑part replacement project

Performance Parameters:

• Power conversion efficiency: 88% minimum
• Output voltage regulation accuracy: ±2%
• Protection response time: less than 200 μs
• MTBF: 320 000 hours

Material Composition:

• Main substrate: FR‑4 industrial‑grade printed circuit board
• Connector: Phosphor‑bronze gold‑plated industrial connector
• Housing: High‑strength flame‑retardant engineering plastic
• Power device: Industrial‑grade power semiconductor components

Structural Characteristics:

• Standard Ovation card‑type module structure
• Spring‑lock card‑in mounting structure for cabinet slot
• Upper transparent protective insulating cover for safety isolation
• Screw terminal block for field power input connection

Working Principle: After AC power input, internal rectification, filtering and multi‑channel DC voltage stabilization circuit work. Distribute stable multi‑group DC power supply to each functional module on DCS back‑plane, meanwhile monitor voltage and current status, trigger protection action when abnormal electrical condition occurs.

Installation Requirements:

• Install in dedicated Ovation cabinet slot position
• Input power wiring must strictly follow terminal definition
• Ensure good cabinet ventilation and heat‑dissipation space
• Must complete power‑on voltage verification before putting into service