GE S739DVR-RST1 - Image 1
GE S739DVR-RST1 - Image 2
GE S739DVR-RST1 - Image 3
Click to enlarge
GE S739DVR-RST1
GE S739DVR-RST1 - Image 2
GE S739DVR-RST1 - Image 3
CALDARO AB S30JBK-ZT-30R3G-4889G
CALDARO AB S30JBK-ZT-30R3G-4889G
Back to products
KOLLMORGEN S20260-SRS
KOLLMORGEN S20260-SRS

GE S739DVR-RST1

Product Introduction:​ The S739DVR-RST1 is a GE Security / GE Industrial Surveillance product. Two interpretations exist in the field: (A) a rack-mount fiber-optic analog video receiver converting optical camera feeds to BNC electrical output, and (B) a 16-channel embedded Network Video Recorder (NVR) under the S739 series. Both share the same catalog number in secondary markets; the RST1 suffix denotes rack-mount with multimode fiber support.

Category:
Description
Technical Specifications (NVR interpretation, most common in current surplus):
  • Channels:​ 16 IP camera inputs (ONVIF), or fiber receiver mode with 1 – 4 optical video decoders
  • Video Compression:​ H.264 / H.265
  • Storage:​ 4 × SATA HDD bays, up to 4 TB per disk (16 TB raw)
  • Outputs:​ 1 × HDMI, 1 × VGA
  • Network:​ 1 × RJ45 10/100/1000 Mbps
  • Alarm I/O:​ Multiple digital inputs, relay outputs
  • Power:​ 48 VDC or 100 – 240 VAC depending on sub-variant
  • Operating Temp:​ -10 °C to 55 °C
  • Mounting:​ 19-inch rack, 1.5U height
    Technical Specifications (Fiber Receiver interpretation):
  • Optical Input:​ Multimode SC/ST, 1310 nm
  • Electrical Output:​ BNC composite 1 Vpp 75 Ω
  • Data Channel:​ MPD (multi-protocol data) RS-485/RS-232 embedded
  • EMI Immunity:​ Fiber isolation against ground loops and VFD noise
    Functional Features:
  • Long-distance video transport without signal degradation
  • Built-in motion detection and event search (NVR mode)
  • Redundant power option in rack chassis
  • Fiber version eliminates ground-loop buzz in steel-mill/crane video
    Application Scenarios:​ Power plant turbine hall CCTV, metro/rail station surveillance, oil & gas perimeter monitoring, factory floor machine-vision archiving
    Installation Requirements:​ For fiber version, match transmitter wavelength and single/multimode type. For NVR version, use UPS-backed supply and enterprise-grade surveillance HDDs, not desktop drives.
    Usage Notes:​ Verify firmware build before connecting to corporate network; legacy GE Security firmware may lack current TLS support. Replace cooling fan on a 3-year interval in dusty environments.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “GE S739DVR-RST1”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

GE 239-RTD-AN Motor Protection Relay with RTD Inputs

unctional Features

  1. Advanced Protection Algorithms
    • 15 Thermal Curves: Configurable overload curves to match motor characteristics .
    • RTD Monitoring: Direct integration with PT100/PT1000 sensors for real-time winding temperature tracking (±0.5% accuracy) .
  2. Operational Flexibility
    • Programmable Outputs: Customizable relay actions for alarms, trips, or process signals (e.g., motor load percentage) .
    • Test Mode: Simulates faults without activating outputs for system validation .
Read more
Quick view

GE 469-P5-HI-A20-E-H Motor Management Relay

Technical Specifications:
  • Voltage Rating: Designed to operate within standard industrial control voltages, typically compatible with 125 VDC or 250 VDC control systems.
  • Current Input: Accepts standard current transformer (CT) inputs such as 1 A or 5 A, enabling integration with various generator monitoring setups.
  • Communication Interfaces: Equipped with multiple communication options including Modbus RTU over RS-485, and optionally Ethernet for integration into SCADA and distributed control systems.
Read more
Quick view

GE IC698CMX016-ED VMIVME-5567-000 350-005567-000 E

Technical Specifications

  • IC698CMX016-ED Control Memory Exchange Module
    • Memory: 16 MB SDRAM with parity for reflective memory data storage .
    • Communication:
      • Fiber Optic Interface: 2.12 Gbaud transmission rate over multimode fiber (LC connectors), supporting up to 300 meters .
      • Network Nodes: Up to 256 nodes in a daisy-chained loop configuration .
      • Packet Sizes: Dynamic 4–64 bytes, achieving 43–174 MB/s transfer rates .
Read more
Quick view

GE IC698CPE040-FJ Central Processing Unit Designed for RX7i PACSystems

Procurement Guidance

  1. Compatibility Notes
    • Valid for RX7i/RX3i PACSystems; firmware suffixes (e.g., -FJ) denote specific variants .
    • Backward-compatible with legacy GE PLCs (e.g., Series 90-70) .
  2. Critical Accessories
    • IC698ACC701 Lithium Battery: Mandatory for RAM backup .
    • VME I/O Modules: e.g., DS200 series for signal distribution .
  3. Avoid Mismatched Claims
    • "512 MB RAM" → Refers to GE IC698CPE030 model .
    • "3AC 400V Input" → Applies to power modules, not CPU logic .
  4. Warranty & Authenticity
    • 12-month warranty for factory-sealed units; verify holographic seals .
    • Cross-check part number 3BHE030579R0003 for industrial-grade variants .
Read more
Quick view

GE IC754CSX06CTD QuickPanel+ Operator Interface

Technical Specifications:
  • The module is equipped with a powerful multi-core processor enabling efficient execution of complex control algorithms and real-time data processing.
  • It features 16 serial communication ports, providing extensive connectivity for interfacing with a wide range of field devices, sensors, and actuators.
  • Memory architecture includes onboard DDR RAM and non-volatile storage to support operating system execution, application hosting, and data logging.
  • Communication interfaces include Gigabit Ethernet for high-speed network connectivity, USB ports for peripheral expansion, and multiple serial standards such as RS-232, RS-422, and RS-485.
  • Designed for industrial use, the module operates within an extended temperature range and meets electromagnetic compatibility and shock/vibration resistance standards.
Read more
Quick view

GE IS215UCVEH2AE

The GE IS215UCVEH2AE is a VMEbus-based controller card designed for mission-critical industrial control systems, particularly within GE's Mark VI Speedtronic Turbine Control System. It serves as the central processing unit (CPU) for managing real-time operations in gas and steam turbines, ensuring precise control and monitoring of rotational speed, load, and safety parameters.
Read more
Quick view

GE MRP643486 IS200VSVOH1BDC — VME Servo Control Card

Technical Specifications:

  • Function: Servo Output Board
  • Compatibility: Designed for use with the Mark VI and Mark Vie Speedtronic turbine control systems.
  • Channels: Typically includes multiple channels for controlling different servo mechanisms.
  • Signal Processing: Converts digital control signals from the system into analog outputs to drive servos.
  • Power Supply: Operates within specified voltage ranges suitable for industrial environments.
  • Environmental Conditions: Rated for operation under specific temperature and humidity conditions, ensuring reliability in demanding settings.
Read more
Quick view

GE RS-FS-9001 362A1052P004 – Complete Technical Profile

Technical Specifications:
  • Designed as part of the Mark VI or Mark Vie control system family, which are widely recognized for their application in gas and steam turbine controls.
  • Supports various input/output configurations tailored to handle signals from sensors, actuators, and other field devices integral to turbine operations.
  • Capable of operating within specific voltage ranges and environmental conditions suitable for industrial settings.
  • Equipped with robust communication capabilities that facilitate integration with broader plant networks and SCADA systems.
Read more
Quick view