PARKER DRG3-1008B-230B - Image 1
PARKER DRG3-1008B-230B - Image 2
PARKER DRG3-1008B-230B - Image 3
Click to enlarge
PARKER DRG3-1008B-230B
PARKER DRG3-1008B-230B - Image 2
PARKER DRG3-1008B-230B - Image 3
PARKER DR1008B-230
PARKER DR1008B-230
Back to products
RELIANCE DSA-MTR12A2
RELIANCE DSA-MTR12A2

PARKER DRG3-1008B-230B

  • Product Name: Compax3 Series Digital Servo Drive
  • Product Introduction: The Parker DRG3-1008B-230B is a Compax3 series​ digital servo amplifier providing 8 Arms​ continuous current, designed for high-dynamic motion control with integrated IEC 61131-3​ programming capability.
Category:
Description
  • Technical Specifications:
    • Rated Current: 8 Arms​ continuous
    • Input Voltage: 230 V AC​ (single/three-phase)
    • Architecture: Dual-core DSP + FPGA
    • Communication: EtherCAT, Profinet, POWERLINK
    • Feedback Support: EnDat 2.2, Hiperface DSL, Resolver
    • Safety: STO (Safe Torque Off), PL e / SIL 3
  • Functional Characteristics: Built-in SoftMotion​ logic; advanced resonance suppression filters; high-bandwidth current loop (kHz-level).
  • Performance Parameters:
    • Form Factor: Book-style compact design
    • Protection: IP20
    • Operating Temp: Refer to standard Compax3 (-10 to +45 typical, some docs -30 to +70)
  • Material Composition: Aluminum heat sink chassis; multilayer PCB with industrial components.
  • Structural Features: Stackable “book-style” mounting; front access I/O and feedback connectors; integrated status display/LEDs.
  • Working Principle: The FPGA generates high-frequency PWM for current control while DSP handles motion profiling and network communication, closing torque/speed/position loops digitally.
  • Advantage Highlights: Eliminates mechanical resonance at high speeds; local motion programming reduces PLC load; ultra-precise positioning (±2 µm referenced in semiconductor apps).
  • Applicable Industries: Semiconductor Handling, Robotics, Packaging, Printing, Medical Automation.
  • Model Series: Parker Compax3 G3 Series.
  • Installation Requirements: Install vertically side-by-side in control cabinet with IP20​ rating; maintain minimum clearance for convection cooling; earth ground securely.
  • Usage Precautions: Configure STO circuits according to machinery safety standards; ensure feedback cable shielding is grounded at one end; tune resonance filters before high-speed operation.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “PARKER DRG3-1008B-230B”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Amat 0010-44213

  • Precision Performance: Engineered for high-precision control, the AMAT 0010-44213 meets the stringent requirements of semiconductor manufacturing.
  • Environmental Resistance: Operates reliably in high-temperature and high-pressure environments, withstanding harsh industrial conditions.
  • Compatibility: Seamlessly integrates with various semiconductor devices, lithography machines, plasma etching equipment, and other advanced material processing technologies.
  • Interface and Control: Effectively interfaces with AMAT’s equipment modules and control systems, ensuring collaborative operation across the entire production line.
Read more
Quick view

CCC TIOC-555HD

Technical Specifications

There is currently no specific and detailed technical specification information available for the CCC TIOC - 555HD. However, based on similar products such as the CCC IOC - 555 - D, it may have the following characteristics:
  • Communication Interface: May support RS - 485 communication.
  • I/O Channels: It is possible to have multiple digital inputs and outputs, as well as analog inputs and outputs. For example, the IOC - 555 - D has 8 digital inputs, 4 digital outputs, 2 analog inputs, and 2 analog outputs.
Read more
Quick view

CUTLER HAMMER JD3250F – Industrial Molded Case Circuit Breaker Frame

Technical Specifications • Voltage Ratings: 600 VAC, 250 VDC • Current Rating: 250 A (frame only; trip unit ordered separately) • Poles: 3 • Interrupting Capacity: 65 kA @ 240 VAC / 35 kA @ 480 VAC / 25 kA @ 600 VAC • Trip Functions: LI (Long-Time & Instantaneous) via field-installable trip units • Mounting: Bolt-on or plug-on; suitable for reverse feed • Standards: UL 489, CSA, IEC 60947-2 • Dimensions: 4.13" × 10" × 4.06" (H×W×D) • Weight: ~3.5 kg (frame only)
Read more
Quick view

Monico CDL-MCLE-FWM

Technical Specifications
  • Input Protocol: Caterpillar® CDL (Cat Data Link).
  • Output Protocols: Supports Modbus (RTU/TCP), CANopen, and other industrial protocols via configurable modules.
  • Data Polling Rate: High-speed, multi-threaded polling at 20–60 parameters per second for real-time monitoring.
  • Pre-configured Registers: Over 400 CDL-based registers for rapid deployment, with customizable mapping for specific applications.
Read more
Quick view

NOUENVOG AAP3798102-00131

Application Scenarios

  1. Compressor Control Systems
    • Cameron TA-Series: Manages inlet valve positioning, oil pressure, and vibration monitoring in TA2000/TA3000 compressors .
  2. Energy Infrastructure
    • Pump Stations: Regulates flow/pressure in pipeline transport .
    • Gas Turbine Backup: Synchronizes auxiliary systems during grid failures .
  3. Industrial Automation
    • Production Lines: Interfaces with Schneider/Bently Nevada PLCs for safety interlocks .
    • Remote Monitoring: Transmits operational data to SCADA via Modbus .
Read more
Quick view

SAACKE FSC-01

Technical Specifications:
  • Supply Voltage: 24 V DC (typical), with options for 110–230 V AC in certain configurations
  • Power Consumption: Low power draw, optimized for continuous operation
  • Operating Temperature: -10°C to +55°C
  • Storage Temperature: -25°C to +70°C
  • Humidity Range: 5% to 95% relative humidity, non-condensing
  • Protection Rating: IP20 (suitable for indoor panel mounting)
  • Input Compatibility: Accepts signals from flame detectors including UV, IR, and ionization sensors
  • Output Relays: Equipped with safety-rated relay outputs for burner activation, alarm signaling, and system shutdown
Read more
Quick view

TOSHIBA GBU648E-S

  • Slot Capacity: Supports up to 8 modules, allowing flexible configuration with TOSHIBA’s EX10 series components (e.g., power supplies, CPUs, I/O units).
  • Power Supply Compatibility: Works with modules like PS261 (power supply) and PU11A (CPU), ensuring stable energy distribution and control logic execution.
  • Communication Modules: Integrates with Profibus DP modules (e.g., GPF611-S) for seamless connectivity with field devices, enabling real-time data exchange in industrial networks.
  • Analog/Digital Modules: Compatible with GAD668-S (analog input) and GDA664-S (analog output) modules, supporting high-precision signal processing for sensors and actuators.
  • Physical Design: Compact, rack-mounted structure optimized for space efficiency in control panels.
Read more
Quick view

Yaskawa CACR-SR07BE12M

  • Input Voltage: Three - phase AC 200V - 230V
  • Output Current: 7A
  • Output Power: 1.5kW or 0.75kW
  • Control Method: Vector control
  • Communication Interface: RS - 485
  • Protection Level: IP20
  • Output Frequency Range: 0.1 - 400Hz
  • Overload Capacity: 150% of the rated current for 60 seconds
  • Dimensions: 150mm * 240mm * 350mm
  • Weight: Approximately 1.14kg
Read more
Quick view