Eaton MTL4541AS - Image 1
Eaton MTL4541AS - Image 2
Click to enlarge
Eaton MTL4541AS
Eaton MTL4541AS - Image 2
Johnson Controls MS-NAE5510-3
Johnson Controls MS-NAE5510-3
Back to products
Honeywell MU-KGPR05 51109620-195
Honeywell MU-KGPR05 51109620-195

Eaton MTL4541AS

Product Name:​ MTL4500 Series 4/20 mA Passive Input Isolator / Current Repeater with HART® Passthrough (Sinking Version)
  • Brief Introduction:​ An intrinsically safe (IS) galvanic isolator barrier that accepts a 4–20 mA signal from a 2- or 3-wire transmitter located in a hazardous area (Zone 0/Div.1) and repeats it as a 4–20 mA output in the safe area. The “AS” variant acts as a current sink rather than sourcing into the safe-area load. Supports bidirectional HART digital communication superimposed on the analog loop.
Category:
Description
  • Technical Specifications:
    • Channels:​ 1 (single channel)
    • Hazardous-Area Input:​ 4–20 mA (under/overrange 1–21.5 mA); terminals 1–2
    • Input Impedance (for HART):​ > 230 Ω
    • Safe-Area Output:​ 4–20 mA passive (current sinking); load resistance typically ≤ 600 Ω
    • Supply Voltage (Safe Side):​ 20–35 V DC (typically 24 V DC from backplane/power bus)
    • Power Dissipation (unit internal):​ approx. 1.1 W @ 24 V DC, 20 mA signal
    • Safety Parameters (IS side):​ Uo ≤ 28 V, Io ≤ 93 mA, Po ≤ 0.65 W; Um = 253 V rms
    • Hazardous Area Certification:​ ATEX / IECEx Ex ia IIC T4–T6; FM / CSA Div. 1 Groups A–D
    • SIL Rating:​ SIL 2 capable (HFT=0), SIL 3 in redundant configuration (HFT≥1) per IEC 61508
    • Mounting:​ 16 mm or 22.5 mm DIN rail (MTL4500 series housing)
  • Features:​ HART protocol transparent; LED indicators on some variants; high noise immunity; galvanic isolation between HA and SA sides.
  • Applications:​ Connecting IS-located 4–20 mA transmitters (pressure, temp., flow) in petrochemical, oil & gas, pharmaceutical plants to DCS/PLC analog input cards.
  • Installation Notes:​ Install in safe area only (Zone 2 / non-hazardous); verify IS calculation (loop approval) before commissioning; do not mix IS and non-IS wiring in same termination block; observe polarity on HA terminals 1(+), 2(–).
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Eaton MTL4541AS”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

CCC IOC-555-D 17-550555-001 Simplex I/O Card / Communication Control Board

Technical Specifications:
  • The module offers 16 serial input/output channels.
  • It integrates a processor, memory, and I/O interfaces into a compact form factor suitable for embedded systems.
  • It supports high computing performance with low power consumption characteristics.
  • Storage options include flash memory and RAM for storing the operating system, applications, and data.
Read more
Quick view

CONTROL 9180B-8

  • Power Supply: Supports AC 220V/50Hz or DC 24V, depending on design requirements.
  • Communication Interfaces: Equipped with RS-485, Ethernet, and Modbus protocols for seamless integration with other devices or systems.
  • Processor: High-performance CPU ensures rapid response and accurate control.
  • Protection Rating: IP65 or higher for dust and water resistance, suitable for harsh industrial conditions.
  • Operating Temperature: Wide temperature range to adapt to diverse industrial settings.
Read more
Quick view

DEIF DLQ144-PC-NB

Technical Specifications:

  • Supply Voltage: 24 V DC (standard industrial voltage)
  • Power Consumption: Low consumption suitable for energy-efficient applications
  • Operating Temperature: -25°C to +70°C, ensuring performance in diverse environments
  • Storage Temperature: -40°C to +85°C
  • Humidity Range: 5% to 95% relative humidity, non-condensing
  • Communication Protocols: Supports Modbus RTU, Modbus TCP, and other standard protocols for integration with SCADA systems
  • Dimensions (WxHxD): Compact design suitable for mounting in switchgear cabinets or control panels
  • Certifications: CE, UL, and other relevant industry standards
Read more
Quick view

EATON XC-CPU202-EC4M-8DI-6DO-XV

  • Power Supply: 24 V DC, with an input power of 33 W and a supply voltage range of 20.4 - 28.8 V DC.
  • Dimensions: Length/Depth 100 mm, Height 100 mm, Width 60 mm.
  • Weight: 0.25 kg.
  • Processor: ARM 532 MHz.
  • Memory: 4 MB.
  • I/O Configuration: 8 digital inputs (DI) and 6 digital outputs (DO).
  • Communication Interfaces: Ethernet (100 Base - TX/10 Base - T), RS 232, CAN.
  • Certifications: EN 50178, IEC/EN 61131 - 2, EAC.
  • Protection Level: IP20.
  • Ambient Operating Temperature: 0 °C - 55 °C.
  • Ambient Storage Temperature: - 25 °C - 70 °C.
Read more
Quick view

Monico CDL-MCLE-FWM

Technical Specifications
  • Input Protocol: Caterpillar® CDL (Cat Data Link).
  • Output Protocols: Supports Modbus (RTU/TCP), CANopen, and other industrial protocols via configurable modules.
  • Data Polling Rate: High-speed, multi-threaded polling at 20–60 parameters per second for real-time monitoring.
  • Pre-configured Registers: Over 400 CDL-based registers for rapid deployment, with customizable mapping for specific applications.
Read more
Quick view

REXROTH VT-VPCD-1-16/V0/1-P-1 R901089559

Product Introduction

The REXROTH VT - VPCD - 1 - 16/V0/1 - P - 1 (R901089559) is a state - of - the - art digital control electronics module. It is specifically designed for the precise control of axial piston pumps, especially the AVS type with HS control. This module plays a crucial role in managing the swivel angle, pressure control, and power limitation of the pump through an electrically controlled proportional valve.
Read more
Quick view

ygo 7702 8070-0102-35

  • Laser Type: Helium - neon laser
  • Wavelength: 633 nm
  • Output Power: > 400 µW
  • Beam Diameter: 3 mm or 6 mm
  • Usable Beam Length: 2 m
  • Beam Pointing Stability: < 0.1 arc sec/°C
  • Operating Temperature: 10 - 30 °C
  • Vacuum Wavelength Stability: 0.01 ppm/24 hour
  • Mounting Type: May have different mounting options, such as with plastic mounting feet.
  • Weight: Approximately 5.5 kg (for some models of the 7702 laser head)
Read more
Quick view

ZYGO ZMI-2002 8020-0211-1-J Precision Measurement System

Technical Specifications:
  • The ZMI-2002 operates based on innovative interferometry principles, offering nanometer-level precision for surface form measurements.
  • It supports a wide range of optical configurations to accommodate diverse measurement needs.
  • Capable of providing high-resolution data, which ensures accurate characterization of surfaces and components.
Read more
Quick view