GE PCIE-5565PIORC-10000

Product Introduction:

The PCIE-5565PIORC is a reflective memory (also called shared memory or mirrored memory) node card for building deterministic, low-latency distributed real-time networks. Data written to the local SDRAM by the host CPU is automatically broadcast over fiber-optic links to all other nodes in the reflective memory ring/star, appearing in their local memory without software intervention. This creates a software-transparent shared memory space across multiple computers — essential for hardware-in-the-loop (HIL) simulation, flight test, and synchronized process control.

Category: GE

Description

Technical Specifications (typical for PCIE-5565PIORC variant -10000 indicates 128 MB option in many catalogs):

Host Bus: PCI Express x4 (Gen 1 — 2.5 GT/s per lane), low-profile (half-height) bracket option included
Onboard Memory: 128 MB or 256 MB DDR SDRAM (parity-protected; -10000 typically = 128 MB, -20000 = 256 MB)
Fiber Ports: 2 × LC duplex (transmit & receive); supports both multimode (up to 300 m) and single-mode (up to 10 km) SFPs
Serial Link Rate: 2.125 Gbaud (Fiber Channel-derived physical layer)
Network Throughput: Up to ~170 MB/s peak (non-redundant); ~87 MB/s redundant mode
Node Capacity: Up to 256 nodes in one reflective memory network
Transfer Latency: < 0.4 µs node-to-node (typical hardware propagation)
Topology Support: Ring, star (via hub), redundant dual-ring for fault tolerance
Power: From PCIe bus (+3.3 V, typ. 1.5 A max)
Operating Temp: 0 °C to +65 °C
Compliance: RoHS, CE, FCC Class A

Features:

Software Transparent: Appears as standard memory-mapped RAM to application; no send/receive API calls needed for data sharing
Deterministic, Zero CPU Overhead: No interrupts, no protocol stack — hardware DMA mirrors writes across the network
Redundant Ring Option: Automatic reconfiguration on fiber break; data continues to flow
Cross-Platform: Drivers for Windows, Linux (VxWorks, QNX also available from Abaco)

Applications: Real-time simulator clusters (HIL/SIL), synchronized data acquisition across multiple test rigs, power-system protection testing, aerospace flight simulator networks, particle accelerator timing/distributed control.

Installation Notes: Assign unique node IDs if required by your RM network topology. Use proper LC-LC fiber patch cords (multimode OM2/OM3 for ≤300 m). For redundant ring, connect RX of node N to TX of node N+1 and close the loop. Ensure all nodes use same memory size configuration.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “GE PCIE-5565PIORC-10000”

Shipping and Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.