FOXBORO P0926AH-B - Image 1
FOXBORO P0926AH-B - Image 2
Click to enlarge
FOXBORO P0926AH-B
FOXBORO P0926AH-B - Image 2
ICS Triplex P153DL002
ICS Triplex P153DL002
Back to products
Socapel PAM-R1N-H8F-AP-P V10700
Socapel PAM-R1N-H8F-AP-P V10700

FOXBORO P0926AH-B

Product Introduction:​
The P0926AH-B is a Field Bus Module (FBM) belonging to the Foxboro I/A Series distributed control system. It provides eight galvanically isolated analog input channels accepting standard 4–20 mA process signals and simultaneously acting as a HART communication host, allowing the DCS to read digital HART data (PV, SV, TV, device status) from smart field transmitters.
Category:
Description
Technical Specifications:
  • Input Channels:​ 8 × isolated analog inputs, grouped 4+4
  • Signal Type:​ 4–20 mA DC (supports live zero / HART superimposition)
  • Input Impedance:​ Approx. 250 Ω (HART-compatible termination)
  • Accuracy:​ ±0.1% of full scale typical
  • Resolution:​ 16-bit A/D conversion
  • HART Support:​ HART 5/6/7 — reads up to 2 digital messages/sec per channel; supports Universal, Common Practice, and Device-Specific commands (burst mode not supported)
  • Power:​ Supplied from Foxboro FCP (Field Control Processor) backplane; optional external excitation per channel group
  • Isolation:​ 500 V channel-to-backplane; channel groups isolated in pairs
  • Operating Temp:​ 0 °C to +60 °C
  • Mounting:​ Snap-in to Foxboro I/A Series FBM base (e.g., FBM base assemblies with redundant bus)
Features:
  • Galvanic isolation prevents ground-loop errors in multi-transmitter loops
  • Integrated HART master enables asset management via Foxboro InTouch / AMS
  • Software-configurable per-channel alarm limits, linearization, square-root extraction
  • Compatible with redundant FCP configurations for high availability
Applications:​ Continuous process plants — chemical, pharmaceutical, power, pulp & paper — for pressure, flow, level, and temperature transmitter signal acquisition with smart device management.
Installation Notes:​ Ensure shield drain wires are grounded at one point (typically at the marshalling terminal block, not at the FBM). Verify loop power supply polarity and that HART modem filters are not inline.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “FOXBORO P0926AH-B”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Foxboro 685-069171-100 Pressure Transmitter Component

Product Type: Pressure Transmitter Sensing Element / Internal Module Assembly Overview: The Foxboro 685-069171-100 is a precision pressure sensing component used within Foxboro pressure transmitters. It serves as the core sensing element (diaphragm-based) that converts applied process pressure into an electrical signal. This part number identifies a specific revision of the sensor assembly compatible with Foxboro E-Series and I/A Series transmitter housings.
Read more
Quick view

FOXBORO A2H124-24FX Industrial Managed Switch

The FOXBORO A2H124-24FX (also referred to as the Enterasys A2H124-24FX) is a Layer 2 managed Ethernet switch designed for industrial and enterprise networks. Manufactured by Enterasys Networks (now part of Extreme Networks), this switch combines high-performance connectivity with robust security and scalability.
Read more
Quick view
Placeholder

Foxboro E69F-BI2-MS Pneumatic Signal Converter

Technical Specifications
  • Accuracy
    • Output signal codes 2 and 3: ±1.0% of full scale
    • Output signal codes 7 and 8: ±2% of full scale
  • Linearity
    • ±0.5% of full scale, typical
  • Repeatability
    • ±0.25% of full scale, typical
  • Hysteresis
    • ±0.5% of full scale, typical
  • Supply Pressure Effect
    • Change in supply pressure causes zero shift of less than 0.04% of full scale/kPa
  • Ambient Temperature Effect
    • Over an operating range of 0 to 60°C (32 to 140°F), a 28°C (50°F) change in ambient temperature causes zero and span shifts of ±1% of full scale or less
  • Inclination Effect
    • A 5 - degree change in vertical inclination results in a maximum zero displacement of 0.25% of full scale
  • Shock Effect
    • At a shock test level of 300 m/s² (30 “g”) measured at the feedback bracket, the maximum zero displacement is 0.5% of full scale
Read more
Quick view

Foxboro FBM207 Base P0916PH

Technical Specifications
  • Interface: PCIe
  • Operating Temperature: -40°C to 85°C
  • Power Supply: 3.3V
  • Transmission Speed: 10Gbps
  • Input Voltage: 24V DC
  • Power Consumption: 5W
  • Storage Temperature: -40°C to 85°C
  • Humidity: 10% to 95% (non - condensing)
  • Protection Level: IP67
Read more
Quick view

Foxboro FBM217 RH916XZ — 16-Channel Analog Input Module

Product Series: Foxboro I/A Series Fieldbus Module (FBM) — Analog Input Product Introduction: The FBM217 RH916XZ is a 16-channel analog input module of the FBM217 family with a distinct part number and revision code (RH916XZ). It provides 4–20 mA and 1–5 VDC input acquisition for 16 process measurement channels and is designed for deployment in Foxboro I/A Series DCS systems requiring high-density analog input coverage.
Read more
Quick view

Foxboro FBM237

Technical Specifications
  • Output Channels: 8 channels
  • Output Signal Range: 0 - 20 mA
  • Operating Voltage: 12 VDC - 24 VDC
  • Current Capacity per Channel: 20 mA
  • Signal Processing Speed: 100 kHz
  • Communication Protocol: Supports Modbus RTU
  • Isolation: Channel - to - channel and channel - to - ground isolation
  • Operating Temperature Range: - 40°C to + 85°C
  • Enclosure Protection Level: IP65
  • Dimensions (W x H x D): 60 mm x 40 mm x 20 mm
  • Weight: Approximately 0.06 kg
Read more
Quick view

FOXBORO FCP270

The FOXBORO FCP270 (Field Control Processor 270) is a distributed, fault-tolerant controller designed for industrial process automation. As part of the I/A Series Distributed Control System (DCS) by Foxboro (now Schneider Electric), it executes real-time control logic, data acquisition, and alarm management in harsh environments.
Read more
Quick view

Foxboro G448-0002 Serial Communication Gateway Module

Catalog Number: G448-0002 Model Series: G448 Series — I/A Series Communication Module Manufacturer: Foxboro (Schneider Electric / Invensys) Product Overview: The G448-0002 is a serial communication interface module for the Foxboro I/A Series distributed control system. It provides RS-232/RS-485 serial port connectivity to enable communication with third-party devices, PLCs, RTUs, and smart field instruments using industry-standard protocols.
Read more
Quick view