DEIF RMP-112D - Image 1
DEIF RMP-112D - Image 2
DEIF RMP-112D - Image 3
Click to enlarge
DEIF RMP-112D
DEIF RMP-112D - Image 2
DEIF RMP-112D - Image 3
TDK-Lambda RM15-2R0GB
TDK-Lambda RM15-2R0GB
Back to products
Kongsberg Maritime RMP201-8
Kongsberg Maritime RMP201-8

DEIF RMP-112D

Remote Multi-Purpose I/O Module – Marine Gen-set / Power Management
  • Product Name:​ RMP-112D Remote I/O Module (DEIF RMP Series for ASC-2 / PPM / MIC-2 systems)
  • Function:​ Distributed digital & analog I/O expansion for DEIF genset controllers and power management systems
Category:
Description
  • I/O Typical Configuration:
    • Digital Inputs:​ 8–12 channels, 24 V DC (wet / dry contact selectable)
    • Digital Outputs:​ 4–8 channels, relay or semiconductor outputs (24 V DC / 250 V AC, 2–5 A)
    • Analog Inputs:​ 2–4 channels 4–20 mA or 0–10 V (for remote temp., pressure, kW etc.)
  • Communication:​ Connected to DEIF main controller via proprietary CAN-based fieldbus (RMP bus)
  • Power Supply:​ 24 V DC (18–32 V), typically powered from main controller or local supply
  • Isolation:​ Opto-isolation on digital I/O; analog inputs isolated from logic
  • Environmental:
    • Operating Temp.:​ –20 °C to +70 °C
    • Humidity:​ Up to 95 % non-condensing
    • Vibration:​ Meets IACS / DNV / ABS marine requirements
  • Housing:​ Metal / flame-retardant plastic DIN-rail case, LED per channel + COM/ERR LED
  • Application:​ Genset start/stop pushbutton interface, alarm lamp drivers, CB status monitoring, AMF (auto mains failure) auxiliary I/O on board vessels or power plants using DEIF ASC-2 / MIC-2.
  • Notes:​ Module addressing set via DIP switches or auto-detected by controller firmware; requires DEIF configuration software (MPC software suite).
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “DEIF RMP-112D”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Amat 0010-44213

  • Precision Performance: Engineered for high-precision control, the AMAT 0010-44213 meets the stringent requirements of semiconductor manufacturing.
  • Environmental Resistance: Operates reliably in high-temperature and high-pressure environments, withstanding harsh industrial conditions.
  • Compatibility: Seamlessly integrates with various semiconductor devices, lithography machines, plasma etching equipment, and other advanced material processing technologies.
  • Interface and Control: Effectively interfaces with AMAT’s equipment modules and control systems, ensuring collaborative operation across the entire production line.
Read more
Quick view

CONTROL 9180B-8

  • Power Supply: Supports AC 220V/50Hz or DC 24V, depending on design requirements.
  • Communication Interfaces: Equipped with RS-485, Ethernet, and Modbus protocols for seamless integration with other devices or systems.
  • Processor: High-performance CPU ensures rapid response and accurate control.
  • Protection Rating: IP65 or higher for dust and water resistance, suitable for harsh industrial conditions.
  • Operating Temperature: Wide temperature range to adapt to diverse industrial settings.
Read more
Quick view

EATON XC-CPU202-EC4M-8DI-6DO-XV

  • Power Supply: 24 V DC, with an input power of 33 W and a supply voltage range of 20.4 - 28.8 V DC.
  • Dimensions: Length/Depth 100 mm, Height 100 mm, Width 60 mm.
  • Weight: 0.25 kg.
  • Processor: ARM 532 MHz.
  • Memory: 4 MB.
  • I/O Configuration: 8 digital inputs (DI) and 6 digital outputs (DO).
  • Communication Interfaces: Ethernet (100 Base - TX/10 Base - T), RS 232, CAN.
  • Certifications: EN 50178, IEC/EN 61131 - 2, EAC.
  • Protection Level: IP20.
  • Ambient Operating Temperature: 0 °C - 55 °C.
  • Ambient Storage Temperature: - 25 °C - 70 °C.
Read more
Quick view

Elmo G-TUB30480ERSS0

  • Rated Voltage: 480 VAC
  • Rated Current: 30 A
  • Continuous Power: Up to 25 kW
  • Communication Interfaces: Ethernet, CANopen, RS232, EtherCAT, etc.
  • Feedback Types: Encoder, resolver, Hall sensor (depending on the model)
  • Operating Temperature Range: - 40°C to +70°C (industrial - grade)
  • Protection Level: IP20 or higher (depending on the model)
  • Installation Method: Rack - mount, DIN - rail mount (depending on the model)
Read more
Quick view

Monico CDL-MCLE-FWM

Technical Specifications
  • Input Protocol: Caterpillar® CDL (Cat Data Link).
  • Output Protocols: Supports Modbus (RTU/TCP), CANopen, and other industrial protocols via configurable modules.
  • Data Polling Rate: High-speed, multi-threaded polling at 20–60 parameters per second for real-time monitoring.
  • Pre-configured Registers: Over 400 CDL-based registers for rapid deployment, with customizable mapping for specific applications.
Read more
Quick view

NOUENVOG AAP3798102-00131

Application Scenarios

  1. Compressor Control Systems
    • Cameron TA-Series: Manages inlet valve positioning, oil pressure, and vibration monitoring in TA2000/TA3000 compressors .
  2. Energy Infrastructure
    • Pump Stations: Regulates flow/pressure in pipeline transport .
    • Gas Turbine Backup: Synchronizes auxiliary systems during grid failures .
  3. Industrial Automation
    • Production Lines: Interfaces with Schneider/Bently Nevada PLCs for safety interlocks .
    • Remote Monitoring: Transmits operational data to SCADA via Modbus .
Read more
Quick view

PARKER AR-04AE-13574

Functional Characteristics High – Performance: Provides high – torque output and fast response, enabling precise control of servo motors. Easy
Read more
Quick view

ZYGO ZMI-2002 8020-0211-1-J Precision Measurement System

Technical Specifications:
  • The ZMI-2002 operates based on innovative interferometry principles, offering nanometer-level precision for surface form measurements.
  • It supports a wide range of optical configurations to accommodate diverse measurement needs.
  • Capable of providing high-resolution data, which ensures accurate characterization of surfaces and components.
Read more
Quick view