TEWS Technologies TVME200-10 - Image 1
TEWS Technologies TVME200-10 - Image 2
TEWS Technologies TVME200-10 - Image 3
Click to enlarge
TEWS Technologies TVME200-10
TEWS Technologies TVME200-10 - Image 2
TEWS Technologies TVME200-10 - Image 3
Bosch Rexroth VT-HNC100-1-23W-08-P-0
Bosch Rexroth VT-HNC100-1-23W-08-P-0
Back to products
ALSTOM UT150-1
ALSTOM UT150-1

TEWS Technologies TVME200-10

Manufacturer:​ TEWS Technologies GmbH
Product Brief:​ A 6U VMEbus slave board that accepts up to four single-size or two double-size IndustryPack modules, providing a modular I/O expansion platform for VME-based industrial computers used in process control, test & measurement, telecom, and defense systems.
Category:
Description
Technical Specifications & Performance Parameters
  • VMEbus Interface:​ ANSI/VITA-1 (VME64) compliant; Slave interface with A16 (Short I/O), A24 (Standard Memory), A32 (Extended Memory) address spaces; D08/D16 data width
  • Interrupts:​ Supports VMEbus IRQ1–IRQ7, configurable via 16-bit rotary switch or software; interrupt response <50 µs
  • IP Slots:​ 4 × single-size IP modules or 2 × double-size IP modules per ANSI/VITA 4-1995
  • IP I/O Access:​ 4 × 50-pin 0.1″ ribbon cable headers on front panel; DMA not supported on base version
  • Address Configuration:​ 16-bit rotary DIP switch for VME base address setting
  • Power Supply:​ Drawn from VMEbus backplane — +5 VDC (±5%), +12 VDC (±10%), –12 VDC (±10%); typical max. 15 W fully loaded
  • Indicators:​ LED for IP access (ACK), +5 V, +12 V, –12 V per slot
  • Protection:​ Self-resetting polyfuse and RF filter on each IP power line
  • Operating Temp.:​ –40 °C to +85 °C (extended version); 0 °C to +60 °C (standard)
  • Storage Temp.:​ –55 °C to +100 °C
  • Humidity:​ 5%–95% RH, non-condensing (IEC 60068-2-3)
  • Dimensions:​ 160 mm (H) × 233.35 mm (D) — standard 6U VME single-slot; weight ≈ 0.70 kg
  • Material / Construction:​ FR4 multilayer PCB, metal front panel with ejector handles; IP20 (when installed in subrack)
Functional Features
  • Hot-swap capable IP modules (depending on IP design)
  • Transparent VME-to-IP bus bridging
  • Compatible with legacy VME hosts (Siemens S5 VME, Motorola MVME, etc.)
  • Software-configurable memory window (32 KB–2 MB per IP in A24; fixed 8 MB per IP in A32)
Installation & Notes
  • Install in standard 6U VME crate / subrack on J1/J2 P1/P2 connectors
  • Set rotary address switch before insertion to avoid bus conflict
  • Ensure proper cooling — IP modules may add localized heat
  • Do not mix IP modules requiring +12 V / –12 V unless backplane supplies them
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “TEWS Technologies TVME200-10”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

CCC IOC-555-D 17-550555-001 Simplex I/O Card / Communication Control Board

Technical Specifications:
  • The module offers 16 serial input/output channels.
  • It integrates a processor, memory, and I/O interfaces into a compact form factor suitable for embedded systems.
  • It supports high computing performance with low power consumption characteristics.
  • Storage options include flash memory and RAM for storing the operating system, applications, and data.
Read more
Quick view

CUTLER HAMMER JD3250F – Industrial Molded Case Circuit Breaker Frame

Technical Specifications • Voltage Ratings: 600 VAC, 250 VDC • Current Rating: 250 A (frame only; trip unit ordered separately) • Poles: 3 • Interrupting Capacity: 65 kA @ 240 VAC / 35 kA @ 480 VAC / 25 kA @ 600 VAC • Trip Functions: LI (Long-Time & Instantaneous) via field-installable trip units • Mounting: Bolt-on or plug-on; suitable for reverse feed • Standards: UL 489, CSA, IEC 60947-2 • Dimensions: 4.13" × 10" × 4.06" (H×W×D) • Weight: ~3.5 kg (frame only)
Read more
Quick view

EATON XC-CPU202-EC4M-8DI-6DO-XV

  • Power Supply: 24 V DC, with an input power of 33 W and a supply voltage range of 20.4 - 28.8 V DC.
  • Dimensions: Length/Depth 100 mm, Height 100 mm, Width 60 mm.
  • Weight: 0.25 kg.
  • Processor: ARM 532 MHz.
  • Memory: 4 MB.
  • I/O Configuration: 8 digital inputs (DI) and 6 digital outputs (DO).
  • Communication Interfaces: Ethernet (100 Base - TX/10 Base - T), RS 232, CAN.
  • Certifications: EN 50178, IEC/EN 61131 - 2, EAC.
  • Protection Level: IP20.
  • Ambient Operating Temperature: 0 °C - 55 °C.
  • Ambient Storage Temperature: - 25 °C - 70 °C.
Read more
Quick view

KONGSBERG MRU-E-JB3

Technical Specifications:
  • Measurement Axes: 6 DOF (Degrees of Freedom) - heave, surge, sway, roll, pitch, and yaw
  • Accuracy: High accuracy across all axes with minimal latency
  • Update Rate: Configurable up to 100 Hz for real-time applications
  • Operating Voltage: Typically 12 to 36 VDC
  • Power Consumption: Low power consumption suitable for extended operation
  • Operating Temperature: -40°C to +70°C, ensuring performance in extreme environments
  • Storage Temperature: -50°C to +85°C
  • Humidity Range: 0% to 100% relative humidity, waterproof design
  • Environmental Protection: IP68 rated for underwater use and protection against dust and water ingress
  • Communication Interfaces: RS-232, RS-422, Ethernet, NMEA 0183, and others depending on configuration
Read more
Quick view

KUKA KSD1-08 Servo Drive Module – Complete Technical Profile

Technical Specifications:
  • The KSD1-08 is part of a series of drive systems tailored for dynamic and efficient operation of robotic arms and similar machinery.
  • It supports various communication protocols essential for integration within complex automation systems.
  • Capable of handling significant power loads while maintaining high efficiency and minimal heat generation, ensuring reliable performance over extended periods.
Read more
Quick view

MOLEX SST-PFB-SLC

Product Introduction

The MOLEX SST-PFB-SLC is a Profibus scanner module designed for use with the Allen-Bradley SLC 500 controller series. It is manufactured by SST, a brand under Molex. The module enables communication between an SLC processor (SLC 5/03 or later) and DP remote I/O devices on a Profibus network, acting as a Profibus DP remote I/O scanner.
Read more
Quick view

Motorola IPMC761-002

  • Processor: Equipped with an MPC7450 series PowerPC processor at 1 GHz, with 512 KB of on - chip L2 cache and 2 MB of L3 cache, and an Altivec coprocessor for high - performance computational applications.
  • Memory: Two banks of soldered flash memory.
  • Communication Interfaces: Includes 1 parallel port, 2 asynchronous serial ports, and 2 synchronous/asynchronous serial ports.
  • Bus Type: VME bus.
  • Power Supply: Draws +5 V and +3.3 V through the PMC connectors.
  • Dimensions: 263 × 58 × 28 mm.
  • Weight: 4.3 kg.
Read more
Quick view

ONLINE DEVELOPMENT 56SAM-810

Technical Specifications:
  • Processor: Equipped with a high-performance microprocessor tailored for real-time processing tasks, ensuring efficient operation in demanding environments.
  • Memory: Includes both RAM and flash memory options to facilitate program execution and data storage. The exact size can vary but is typically sufficient for storing application-specific software and temporary data.
  • Communication Interfaces: Supports multiple communication protocols, including serial interfaces (RS-232/485), Ethernet, and possibly fieldbus options like CAN or Modbus, facilitating connectivity with other devices and systems.
  • Input/Output Capabilities: Designed to interface with various sensors, actuators, and control systems through configurable digital and analog input/output channels.
Read more
Quick view