GE DS200UCPBG6AFB - Image 1
GE DS200UCPBG6AFB - Image 2
Click to enlarge
GE DS200UCPBG6AFB
GE DS200UCPBG6AFB - Image 2
WOODHEAD DRL-DPM-BKF
WOODHEAD DRL-DPM-BKF
Back to products
BAUMÜLLER DSD28M65U6054
BAUMÜLLER DSD28M65U6054

GE DS200UCPBG6AFB

Product Introduction:​ The DS200UCPBG6AFB is a core processing board within GE’s Speedtronic™ Mark V turbine control system. It functions as the I/O engine and control processor, executing application code, managing communication with I/O packs, and exchanging data over the Mark V COREBUS network. It contains the main microprocessor, memory sockets, and communication ports required for turbine control logic execution.

Category:
Description
Technical Specifications & Performance Parameters:
  • Processor:​ Intel 80486DX (some sources cite compatibility with higher-grade processors in later revisions)
  • Memory:​ 1 × SIMM/DIMM socket for DRAM; sockets for EPROM/PROM containing application and boot firmware
  • Communication Ports:​ 2 × RS-232 serial ports (DB-25 or header), 1 × ARCNET network interface (for COREBUS/peer communication), optional Ethernet capability via daughter card
  • Core Function:​ Processes analog and digital I/O data, executes turbine control sequences, broadcasts status on COREBUS
  • Power Requirement:​ +5 V DC (primary), +12 V / -12 V (aux. for serial drivers), as supplied by Mark V rack backplane
  • Connectors:​ 34-pin ribbon for local I/O or configuration; backplane edge connector for rack bus; 7-position DIP switch block for configuration/addressing
  • Redundancy Support:​ Compatible with Mark V triple-modular redundant (TMR) or dual architecture
Material & Structural Features:
  • Board Type:​ Multilayer FR-4 PCB with gold-finger backplane connector
  • Dimensions:​ Approx. 309 mm (W) × 211 mm (H) × 41 mm (D) — typical Mark V board format
  • Weight:​ Approx. 1.8 – 2.2 kg
  • Indicators:​ Onboard LEDs for power, run status, fault
Operating Conditions & Installation Requirements:
  • Operating Temp.:​ -40 °C to +85 °C (qualified for turbine enclosure environments)
  • Storage Temp.:​ -40 °C to +85 °C
  • Humidity:​ 5 % – 95 % RH non-condensing
  • Installation:​ Insert into designated slot in GE Mark V control cabinet; secure with captive screws; ensure ESD precautions
  • Handling:​ Handle only by edges; use anti-static wrist strap
Application Scenarios:​ Gas and steam turbine control in power generation, oil & gas compression stations, combined-cycle plants — part of GE Frame 5/6/7/9 turbine control cabinets.
Notes / Precautions:
  • This board must be programmed with the correct PROM/EPROM set matching the turbine application — mismatched firmware will prevent proper operation.
  • Do not attempt field repair; faulty boards should be returned to GE-qualified service centers.
  • Verify proper seating in backplane before powering up; partial insertion can cause bus errors.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “GE DS200UCPBG6AFB”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

FOXBORO RH924WA Fieldbus Controller Module

Technical Specifications:
  • Processor Capacity: Equipped with a powerful processor capable of handling complex control algorithms and multiple tasks simultaneously.
  • Memory: Offers substantial memory for storing programs, historical data, and configuration settings.
  • Communication Interfaces: Supports various communication protocols including Ethernet, Modbus, and proprietary Foxboro protocols, ensuring compatibility with a wide range of devices and systems.
  • I/O Capabilities: Designed to interface with numerous input/output modules, enabling it to gather data from sensors and control actuators or other field devices.
  • Power Supply: Operates on standard industrial power supply voltages, with options for redundancy to ensure continuous operation in critical applications.
  • Environmental Tolerance: Built to withstand harsh industrial environments, featuring resistance to vibration, temperature extremes, and electromagnetic interference.
Read more
Quick view

GE IC698CPE010 – Control Processor Module

The GE IC698CPE010 (also referred to as the PACSystems RX7i VME CPU) is a high-performance industrial controller designed for real-time automation and process control in mission-critical environments. As part of GE’s PACSystems RX7i platform, it combines robust hardware with flexible programming capabilities to meet the demands of complex industrial applications.
Read more
Quick view

GE IS215UCVEH2AE

The GE IS215UCVEH2AE is a VMEbus-based controller card designed for mission-critical industrial control systems, particularly within GE's Mark VI Speedtronic Turbine Control System. It serves as the central processing unit (CPU) for managing real-time operations in gas and steam turbines, ensuring precise control and monitoring of rotational speed, load, and safety parameters.
Read more
Quick view

GE Multilin 369-H1-R-M-F-E-H-E – Motor Management Relay

The GE 369-HI-R-M-F-E-H-E (also referred to as the Multilin 369 Motor Management Relay) is a high-performance industrial device designed for advanced motor protection, monitoring, and control in mission-critical applications. As part of GE’s Multilin product line, it combines robust hardware with programmable logic to ensure reliability in harsh environments.
Read more
Quick view

GE PMC-0247RC-282000 350-93750247-282000F Compact Intelligent PLC & I/O Module for GE PACSystems RX3i

Technical Specifications:
  • Function Type: This module serves as a processor or input/output (I/O) interface component within the turbine control system, responsible for signal processing, data acquisition, and command execution.
  • Processor and Memory: Equipped with a high-speed digital signal processor (DSP) and sufficient onboard memory to support real-time control algorithms, diagnostics, and firmware operations.
  • Communication Interface: Supports high-speed communication via Ethernet or fiber optic links, enabling integration with the central control system and other field devices using protocols such as Profibus, Modbus, or proprietary GE control networks.
  • I/O Support: Designed to interface with analog and digital signals from sensors and actuators, including temperature, pressure, speed, and valve position feedback.
Read more
Quick view

GE VME7740-841 High-Performance VMEbus Single-Board Computer

Procurement Guidance

  1. Compatibility Notes
    • Valid for VMEbus Rev. C.1 systems; firmware suffixes denote processor variants (e.g., -841 = Pentium III).
    • Backward-compatible with legacy GE VersaPAC/VME systems .
  2. Critical Accessories
    • IC698ACC701 Lithium Battery: Mandatory for RAM backup .
    • Resolver/Encoder Modules (e.g., X6/X12 interfaces) for closed-loop control .
  3. Avoid Mismatches
    • High-channel I/O claims → Use GE VMIVME-5565 series.
    • Core i7 processors → Refer to GE IC698CPE030.
  4. Authenticity Verification
    • Holographic seals on factory-sealed units; 12-month warranty .
    • Cross-check part number 3BHE030579R0003 for industrial-grade variants .
Read more
Quick view

GE VMIVME-2540 Intelligent Counter/Controller

Technical Specifications:

  • Module Type: 16-channel analog-to-digital input module for VMEbus systems.
  • Input Resolution: 16-bit resolution ensures high accuracy and fine signal discrimination across the measurement range.
  • Input Voltage Ranges: Supports multiple selectable input ranges including ±10 V, ±5 V, 0–10 V, and 0–5 V, accommodating a wide variety of sensor and transducer outputs.
  • Sampling Rate: Capable of high-speed data acquisition with a per-channel sampling rate up to 100 kHz, enabling real-time monitoring of fast-changing signals.
  • Analog Inputs: Features 16 single-ended or 8 differential input channels, providing flexibility in signal connection and noise rejection.
Read more
Quick view

GE VMIVME-5576 High-Speed Fiber-Optic Reflective Memory Interface

Technical Specifications:

  • Processor: Equipped with a powerful processor that supports high-speed operation suitable for compute-intensive tasks. Depending on the specific configuration, it can feature processors like PowerPC or Intel architectures.
  • Memory: Offers significant RAM capacity, essential for running complex applications and multitasking efficiently. It also includes options for non-volatile memory for data retention without power.
  • Storage: Supports various storage options such as CompactFlash or SSD for storing operating systems, applications, and data.
  • I/O Interfaces: Comes with multiple I/O interfaces including USB ports, serial ports, Ethernet, and digital I/O, allowing connectivity to a wide range of peripherals and networks.
Read more
Quick view