WOODHEAD DRL-DPM-BKF - Image 1
WOODHEAD DRL-DPM-BKF - Image 2
WOODHEAD DRL-DPM-BKF - Image 3
Click to enlarge
WOODHEAD DRL-DPM-BKF
WOODHEAD DRL-DPM-BKF - Image 2
WOODHEAD DRL-DPM-BKF - Image 3
SIGMATEK DPS001
SIGMATEK DPS001
Back to products
GE DS200UCPBG6AFB
GE DS200UCPBG6AFB

WOODHEAD DRL-DPM-BKF

Product Introduction:​ The DRL-DPM-BKF with PC/104 bus interface (also referenced as PC104-DPIO or PC104-DP10 depending on the backplane variant) is an embedded communication module that enables a PC/104 or PC/104-Plus based industrial computer to act as a PROFIBUS-DP Master station. It offloads the entire PROFIBUS protocol stack to its onboard processor (typically Hilscher netX-class ASIC), minimizing host CPU load.

Category:
Description
Technical Specifications & Performance Parameters:
  • Host Bus Interface:​ PC/104 (ISA 16-bit I/O mapped); some variants support PC/104-Plus (PCI) — check exact P/N suffix
  • Fieldbus Protocol:​ PROFIBUS-DP V0/V1/V2 (Master mode; Slave mode supported on some firmware versions)
  • Data Rate:​ 9.6 kbps to 12 Mbps (auto baud detection configurable)
  • PROFIBUS Connector:​ 1 × D-Sub 9-pin female (RS-485, with optical isolation ≥ 1 kV)
  • Max. Slave Addresses:​ Up to 126 PROFIBUS stations (address space limited by application)
  • Dual-Port RAM / Mailbox:​ Onboard Dual-Port RAM for cyclic I/O data exchange with host
  • Diagnostics:​ Extensive status LEDs (PWR, RUN, ERR, BF), diagnostic buffers accessible via driver API
  • Supported OS Drivers:​ Windows (XP/7/10 Embedded), Linux, VxWorks, QNX
  • Power Requirement:​ +5 V DC from PC/104 bus (typ. 300 – 500 mA); optional +12 V for transceiver section
Material & Structural Features:
  • Form Factor:​ Standard PC/104 module (90 mm × 96 mm), stacking header connectors
  • Housing:​ No enclosure (board-level); components conform to IPC-A-610 Class 2/3
  • Indicators:​ 3–4 LEDs on top edge for bus and module status
  • Weight:​ Approx. 60 – 80 g
Operating Conditions & Installation Requirements:
  • Operating Temp.:​ 0 °C to +60 °C (commercial); extended temp. -40 °C to +85 °C on some batches
  • Humidity:​ 5 % – 95 % RH non-condensing
  • Installation:​ Stack directly onto PC/104 CPU board using bus spacers; secure with mounting hardware
  • Termination:​ PROFIBUS network requires 220 Ω termination resistor at each end (not on card)
Application Scenarios:​ Embedded controllers for machine tools, packaging lines, material handling — connecting PC-based soft-PLC or SCADA to PROFIBUS-DP field devices (drives, remote I/O, valves, analyzers).
Notes / Precautions:
  • Verify the exact P/N suffix: DRL-DPM-BKF may also appear in DIN-rail gateway format — this description applies to the PC/104 board version (PC104-DPIO).
  • Ensure proper GND reference between PC/104 system and PROFIBUS shield.
  • Firmware configuration is done via Brad/Hilscher SYCON.netor equivalent configuration tool.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “WOODHEAD DRL-DPM-BKF”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Amat 0010-44213

  • Precision Performance: Engineered for high-precision control, the AMAT 0010-44213 meets the stringent requirements of semiconductor manufacturing.
  • Environmental Resistance: Operates reliably in high-temperature and high-pressure environments, withstanding harsh industrial conditions.
  • Compatibility: Seamlessly integrates with various semiconductor devices, lithography machines, plasma etching equipment, and other advanced material processing technologies.
  • Interface and Control: Effectively interfaces with AMAT’s equipment modules and control systems, ensuring collaborative operation across the entire production line.
Read more
Quick view

CCC IOC-555-D 17-550555-001 Simplex I/O Card / Communication Control Board

Technical Specifications:
  • The module offers 16 serial input/output channels.
  • It integrates a processor, memory, and I/O interfaces into a compact form factor suitable for embedded systems.
  • It supports high computing performance with low power consumption characteristics.
  • Storage options include flash memory and RAM for storing the operating system, applications, and data.
Read more
Quick view

EATON XC-CPU202-EC4M-8DI-6DO-XV

  • Power Supply: 24 V DC, with an input power of 33 W and a supply voltage range of 20.4 - 28.8 V DC.
  • Dimensions: Length/Depth 100 mm, Height 100 mm, Width 60 mm.
  • Weight: 0.25 kg.
  • Processor: ARM 532 MHz.
  • Memory: 4 MB.
  • I/O Configuration: 8 digital inputs (DI) and 6 digital outputs (DO).
  • Communication Interfaces: Ethernet (100 Base - TX/10 Base - T), RS 232, CAN.
  • Certifications: EN 50178, IEC/EN 61131 - 2, EAC.
  • Protection Level: IP20.
  • Ambient Operating Temperature: 0 °C - 55 °C.
  • Ambient Storage Temperature: - 25 °C - 70 °C.
Read more
Quick view

Monico CDL-MCLE-FWM

Technical Specifications
  • Input Protocol: Caterpillar® CDL (Cat Data Link).
  • Output Protocols: Supports Modbus (RTU/TCP), CANopen, and other industrial protocols via configurable modules.
  • Data Polling Rate: High-speed, multi-threaded polling at 20–60 parameters per second for real-time monitoring.
  • Pre-configured Registers: Over 400 CDL-based registers for rapid deployment, with customizable mapping for specific applications.
Read more
Quick view

Motorola IPMC761-002

  • Processor: Equipped with an MPC7450 series PowerPC processor at 1 GHz, with 512 KB of on - chip L2 cache and 2 MB of L3 cache, and an Altivec coprocessor for high - performance computational applications.
  • Memory: Two banks of soldered flash memory.
  • Communication Interfaces: Includes 1 parallel port, 2 asynchronous serial ports, and 2 synchronous/asynchronous serial ports.
  • Bus Type: VME bus.
  • Power Supply: Draws +5 V and +3.3 V through the PMC connectors.
  • Dimensions: 263 × 58 × 28 mm.
  • Weight: 4.3 kg.
Read more
Quick view

REXROTH VT-VPCD-1-16/V0/1-P-1 R901089559

Product Introduction

The REXROTH VT - VPCD - 1 - 16/V0/1 - P - 1 (R901089559) is a state - of - the - art digital control electronics module. It is specifically designed for the precise control of axial piston pumps, especially the AVS type with HS control. This module plays a crucial role in managing the swivel angle, pressure control, and power limitation of the pump through an electrically controlled proportional valve.
Read more
Quick view

Yaskawa CACR-SR07BE12M

  • Input Voltage: Three - phase AC 200V - 230V
  • Output Current: 7A
  • Output Power: 1.5kW or 0.75kW
  • Control Method: Vector control
  • Communication Interface: RS - 485
  • Protection Level: IP20
  • Output Frequency Range: 0.1 - 400Hz
  • Overload Capacity: 150% of the rated current for 60 seconds
  • Dimensions: 150mm * 240mm * 350mm
  • Weight: Approximately 1.14kg
Read more
Quick view

ZYGO ZMI-2002 8020-0211-1-J Precision Measurement System

Technical Specifications:
  • The ZMI-2002 operates based on innovative interferometry principles, offering nanometer-level precision for surface form measurements.
  • It supports a wide range of optical configurations to accommodate diverse measurement needs.
  • Capable of providing high-resolution data, which ensures accurate characterization of surfaces and components.
Read more
Quick view