ProSoft Technology ILX34-MBS485 - Image 1
ProSoft Technology ILX34-MBS485 - Image 2
Click to enlarge
ProSoft Technology ILX34-MBS485
ProSoft Technology ILX34-MBS485 - Image 2
MOXA ICF-1280I-M-ST-T
MOXA ICF-1280I-M-ST-T
Back to products
Alstom ICP232 029.359325
Alstom ICP232 029.359325

ProSoft Technology ILX34-MBS485

Product Name:​ Modbus Serial Communication Module for Allen-Bradley 1734 Point I/O & CompactLogix L1
Product Introduction:​ Slot-in RS-485 Modbus RTU/ASCII master or slave module that bridges serial field devices (meters, VFDs, sensors) into Rockwell EtherNet/IP or ControlNet architectures via the 1734 Point I/O backplane. No external gateway required.
Category:
Description
Technical Specifications:
  • Serial Interface:​ 1 × RS-485 (3-terminal pluggable, half-duplex), optically isolated 2500 Vrms
  • Supported Protocols:​ Modbus RTU, Modbus ASCII; Master/Slave software-selectable
  • Baud Rate:​ 110 / 300 / 600 / 1200 / 2400 / 4800 / 9600 / 19200 / 38400 bps
  • Data Format:​ 7 or 8 data bits; 1 or 2 stop bits; None / Even / Odd parity
  • Node Capacity:​ Up to 31 slaves on one RS-485 bus; node address 1–247
  • Command Buffer:​ Up to 30 Modbus commands; max 36 registers per command; 2000-word input & output data cache
  • Backplane Current Draw:​ 75 mA @ 5 VDC (typical); external field power 10–28.8 VDC
  • Indicators:​ Module Status (Green/Red), Network Status (Green/Red), TXD (Green), RXD (Green)
  • Configuration:​ Studio 5000 Add-On Instruction (AOI) + ProSoft Configuration Builder; diagnostic tags visible in controller
  • Operating Temp:​ -20 °C to +55 °C (some datasheets cite -40 °C to +85 °C storage)
  • Dimensions (H×W×L):​ 56 × 12 × 75.5 mm; mounts on 1734-TB/TBS terminal base
  • Certifications:​ CE, cULus, RoHS
    Key Features:​ Hot-swap capable; UDT tag-based diagnostics (CRC errors, timeouts); up to 1219 m (4000 ft) RS-485 cable run.
    Applications:​ Water/wastewater SCADA, energy management, connecting temperature transmitters, power meters, VFDs to CompactLogix PLCs.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “ProSoft Technology ILX34-MBS485”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

ProSoft 5205-DFNT-PDPS

Product Brief Introduction

This standalone protocol conversion gateway is formally developed and produced by ProSoft Technology (United States), belonging to the standard ProLinx 5000 product series. The core design objective is realizing bidirectional real-time protocol translation between EtherNet/IP industrial Ethernet network and PROFIBUS DP-V0 Slave fieldbus network, establishing seamless data interaction between Rockwell EtherNet/IP master-side control equipment and Siemens PROFIBUS DP master host systems.
Read more
Quick view

ProSoft 6104-WA-PDPM Wireless PROFIBUS DP Gateway Master Module

Technical Specifications
  • Wireless Communication Parameters
    • It operates in the 2.4 GHz frequency band ranging from 2400 MHz to 2483.5 MHz and complies with the IEEE 802.11 b wireless standard.
    • The wireless data rate can reach up to 11 Mbps, with an output power of 32 mW (15 dBm) and a maximum open-air transmission distance of 400 meters.
    • It is equipped with two RP-SMA connectors that support antenna diversity, which enhances the stability of wireless signal reception and transmission.
  • PROFIBUS DP Related Parameters
    • It is equipped with an RS-485 PROFIBUS DP interface and supports PROFIBUS DP and DP-V1 protocols.
    • The communication baud rate of PROFIBUS DP ranges from 9.6 kbps to 12 Mbps, and it can support up to 125 PROFIBUS DP slave devices.
  • Power and Mechanical Parameters
    • It has a power supply requirement of 10 - 36 VDC, adapting to different industrial power supply environments.
    • It adopts a DIN rail mounting design with an IP20 protection rating, which fits the standard installation specifications of industrial control cabinets and prevents dust intrusion effectively.
Read more
Quick view

ProSoft MVI56-MNETR Modbus TCP

  • Technical Specifications
    • Mechanical and Power Parameters
      • It adopts a single-slot design compatible with the Controllogix 1756 backplane, enabling easy installation into Controllogix chassis without occupying excessive space.
      • The backplane current load reaches 800 mA under 5 VDC and 3 mA under 24 VDC, matching the power supply requirements of Controllogix systems for stable operation.
    • Communication Parameters
      • It is equipped with a 10/100 Mbps Ethernet interface with auto-crossover detection, using an RJ45 connector suitable for Cat5 cables, and it supports Ethernet/IP pass-through communication.
      • It supports storage and transfer of up to 5000 16-bit registers with the Controllogix processor through block transfer or side-connect interface. Client parameters are configurable, including a minimum response delay ranging from 0 to 65535 milliseconds, and it also supports floating-point data types.
    • Environmental and Display Parameters
      • The operating temperature ranges from 0 °C to 60 °C, and the storage temperature ranges from -40 °C to 85 °C. It can operate normally in 5% to 95% relative humidity environments without condensation.
      • It is equipped with a 4-character scrolling alphanumeric LED display that shows module version, IP address, application port settings and error information, along with LED indicators for module status, application status and error status.
Read more
Quick view

ProSoft MVI56-PDPS PROFIBUS DP Slave Communication Module for ControlLogix

Technical Specifications
  • Mechanical and Power Parameters
    • It adopts a single-slot design compatible with the ControlLogix 1756 backplane, supporting installation in both local and remote ControlLogix racks.
    • The power consumption parameters match ControlLogix chassis requirements: 5 VDC backplane current draw is 800 mA, and 24 VDC current draw is 3 mA, ensuring stable operation without overloading the chassis power supply.
  • PROFIBUS DP Communication Parameters
    • It complies with PROFIBUS DP V0 and V1 standards, supporting baud rates ranging from 9.6 kbps to 12 Mbps for flexible network configuration.
    • The module supports up to 244 bytes of input data and 244 bytes of output data for cyclic communication. For acyclic communication, it supports PROFIBUS DP V1 services, including parameterization, diagnosis and alarm handling.
    • It is equipped with a standard DB9 male PROFIBUS DP connector, compatible with standard PROFIBUS DP cables and connectors, and supports PROFIBUS DP slave addressing from 0 to 125.
Read more
Quick view

ProSoft MVI69-MNET Modbus TCP

  • Technical Specifications
    • Power and Mechanical Parameters
      • It has a maximum current load of 800 mA at 5 VDC power supply. It adopts a standard 1769 single-slot design and is compatible with the 1769 backplane, which can be smoothly installed into the corresponding CompactLogix chassis.
      • It is recognized as a standard input and output module by the CompactLogix system, enabling unobstructed access to processor memory for smooth data transfer between the processor and the module.
    • Communication Parameters
      • It is equipped with a 10/100 Base-T Ethernet-compatible interface. The server driver can support connections to up to five Modbus TCP/IP clients through service port 502 with standard MBAP messaging, and another five clients through Modbus RTU/ASCII on service port 2000.
      • The client driver can actively read and write data with Modbus TCP/IP-compatible devices, and a single client can support up to 100 commands that can be sent to one or multiple servers. All data mapping of the module starts from Modbus register 40001.
    • Compatibility Parameters
      • It is compatible with all CompactLogix and MicroLogix 1500 LRP controllers, but it cannot be used with 1769-QBFC1B, 1769-L16X and 1769-L18X models. It supports Enron, Daniels and other floating-point data types to meet diverse data processing needs.
Read more
Quick view

ProSoft PLX31-EIP-SIE EtherNet/IP to Siemens Industrial Ethernet Gateway

Core Function

  • Protocol Conversion: Bridges EtherNet/IP (CIP, PCCC) and Siemens Industrial Ethernet protocols for seamless interoperability between Rockwell controllers and Siemens PACs .
  • Data Exchange: Supports high-speed bidirectional transfers of up to 10,000 16-bit registers, ideal for large-scale industrial data synchronization .
Read more
Quick view

ProSoft PLX32-MBTCP-SIE

Product Name:​ ProSoft Technology PLX32-MBTCP-SIE Modbus TCP/IP to Siemens S7 Industrial Ethernet Communication Gateway
Product Introduction:​
An industrial protocol gateway that enables bidirectional data exchange between Modbus TCP devices (Client and/or Server) and Siemens S7 PLCs (S7-300/400/1200/1500) over Siemens Industrial Ethernet. Eliminates need for custom drivers in mixed-vendor automation networks.
Read more
Quick view

ProSoft RLX2-IHNF-A 802.11abgn Fast Industrial Hotspot

  • Technical Specifications
    • Physical and Environmental Parameters
      • It adopts a die-cast aluminum-plastic housing and DIN rail mounting. Its dimensions are 14.8 cm × 11.8 cm × 3.8 cm, and it weighs 499 grams, which is compact and easy to install in control cabinets.
      • The operating temperature range is -40°C to 70°C, and it can withstand up to 100% relative humidity without condensation. It complies with IEC 60068 anti-shock and anti-vibration standards, resisting 20g three-axis shock and 5g vibration from 10Hz to 150Hz.
    • Power Parameters
      • It supports 10 - 24 VDC power supply and is compatible with the 802.3af PoE standard. It can be powered by a PoE injector, reducing wiring complexity.
      • Its power consumption is less than 8W for Series C and less than 9W for Series B, featuring low energy consumption and adapting to long-term continuous operation in industrial systems.
    • Communication Parameters
      • It supports multiple wireless standards such as 802.11a, 802.11g, 802.11n, 802.11h and 802.11i, and is equipped with 3 RP-SMA antenna connectors for MIMO technology.
      • The adjustable transmit power ranges from 17 dBm to 22 dBm, and the receiver sensitivity is as low as -92 dBm at low transmission rates, ensuring stable signal reception.
      • It is equipped with one 10/100/1000 Base-T shielded RJ45 Ethernet port and one RS232 DB9 female serial port, supporting direct communication conversion between Modbus TCP/IP and Modbus RTU.
Read more
Quick view