ASYST HS80-01 9700-4774-01 - Image 1
ASYST HS80-01 9700-4774-01 - Image 2
Click to enlarge
ASYST HS80-01 9700-4774-01
ASYST HS80-01 9700-4774-01 - Image 2
SAACKE HMI10-M REV203
SAACKE HMI10-M REV203
Back to products
KEBA HT401-222-40
KEBA HT401-222-40

ASYST HS80-01 9700-4774-01

Manufacturer:​ ASYST Technologies (USA, now part of Brooks Automation / applied in SMIF / EFEM systems)
Product Brief:​ An industrial communication gateway used in semiconductor fab automation — interfaces ASYST SMIF (Standard Mechanical InterFace) pod openers, load ports, and wafer-handling robots with host tool controllers. Performs protocol conversion between SECS/GEM, EtherNet/IP, DeviceNet, and Modbus TCP.
Category:
Description
Key Technical Specifications:
  • Part Number:​ HS80-01, Material No. 9700-4774-01
  • Function:​ Multi-protocol smart communication node / SECS/GEM interface module
  • Supported Protocols:​ SECS-I / SECS-II / GEM (SEMI E30/E5), EtherNet/IP, Modbus TCP, DeviceNet
  • Network Interface:​ RJ45 10/100 Mbps Ethernet (auto-negotiate); optional serial (RS-232/485)
  • Power Supply:​ 24 V DC (typical semiconductor equipment standard)
  • Indicators:​ LEDs for Power, Run, Comms Tx/Rx, Fault
  • Housing:​ Metal enclosure, fanless, EMI-shielded for Class 100 cleanroom compatibility
  • Mounting:​ DIN rail or panel mount inside equipment control cabinet
  • Weight:​ Approx. 2.0 – 2.5 kg
  • Environmental:​ Designed for cleanroom ambient (0–50 °C, non-condensing)
  • Compatibility:​ Direct replacement for HS80-04 (9700-4774-04) in most systems
Functional Features:
  • Real-time protocol translation between fab host HSMS/SECS messages and local device I/O or fieldbus
  • Buffers and forwards wafer mapping / pod status data to tool controller
  • Web-based or PC configuration utility for network parameters and protocol mapping
  • Over-voltage / over-current protection on power input
Application Scenarios:​ SMIF-POD opener communication, EFEM (Equipment Front End Module) integration, wafer sorter / aligner networking in 200 mm / 300 mm fabs.
Installation & Notes:
  • Assign static IP consistent with fab network subnet; confirm HSMS active/passive mode matches host.
  • Ensure proper grounding to equipment chassis to meet SEMI E-84ESD requirements.
  • Firmware should be matched to the ASYST system software version installed on the tool.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “ASYST HS80-01 9700-4774-01”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

CUTLER HAMMER JD3250F – Industrial Molded Case Circuit Breaker Frame

Technical Specifications • Voltage Ratings: 600 VAC, 250 VDC • Current Rating: 250 A (frame only; trip unit ordered separately) • Poles: 3 • Interrupting Capacity: 65 kA @ 240 VAC / 35 kA @ 480 VAC / 25 kA @ 600 VAC • Trip Functions: LI (Long-Time & Instantaneous) via field-installable trip units • Mounting: Bolt-on or plug-on; suitable for reverse feed • Standards: UL 489, CSA, IEC 60947-2 • Dimensions: 4.13" × 10" × 4.06" (H×W×D) • Weight: ~3.5 kg (frame only)
Read more
Quick view

DEIF DLQ144-PC-NB

Technical Specifications:

  • Supply Voltage: 24 V DC (standard industrial voltage)
  • Power Consumption: Low consumption suitable for energy-efficient applications
  • Operating Temperature: -25°C to +70°C, ensuring performance in diverse environments
  • Storage Temperature: -40°C to +85°C
  • Humidity Range: 5% to 95% relative humidity, non-condensing
  • Communication Protocols: Supports Modbus RTU, Modbus TCP, and other standard protocols for integration with SCADA systems
  • Dimensions (WxHxD): Compact design suitable for mounting in switchgear cabinets or control panels
  • Certifications: CE, UL, and other relevant industry standards
Read more
Quick view

KONGSBERG MRU-E-JB3

Technical Specifications:
  • Measurement Axes: 6 DOF (Degrees of Freedom) - heave, surge, sway, roll, pitch, and yaw
  • Accuracy: High accuracy across all axes with minimal latency
  • Update Rate: Configurable up to 100 Hz for real-time applications
  • Operating Voltage: Typically 12 to 36 VDC
  • Power Consumption: Low power consumption suitable for extended operation
  • Operating Temperature: -40°C to +70°C, ensuring performance in extreme environments
  • Storage Temperature: -50°C to +85°C
  • Humidity Range: 0% to 100% relative humidity, waterproof design
  • Environmental Protection: IP68 rated for underwater use and protection against dust and water ingress
  • Communication Interfaces: RS-232, RS-422, Ethernet, NMEA 0183, and others depending on configuration
Read more
Quick view

KUKA KSD1-08 Servo Drive Module – Complete Technical Profile

Technical Specifications:
  • The KSD1-08 is part of a series of drive systems tailored for dynamic and efficient operation of robotic arms and similar machinery.
  • It supports various communication protocols essential for integration within complex automation systems.
  • Capable of handling significant power loads while maintaining high efficiency and minimal heat generation, ensuring reliable performance over extended periods.
Read more
Quick view

REXROTH VT-VPCD-1-16/V0/1-P-1 R901089559

Product Introduction

The REXROTH VT - VPCD - 1 - 16/V0/1 - P - 1 (R901089559) is a state - of - the - art digital control electronics module. It is specifically designed for the precise control of axial piston pumps, especially the AVS type with HS control. This module plays a crucial role in managing the swivel angle, pressure control, and power limitation of the pump through an electrically controlled proportional valve.
Read more
Quick view

XP POWER F8B6D4A3G3

Technical Specifications

  • Output Characteristics: It is a quad - output power supply, but specific output voltage and current values are not clearly provided in the existing information.
  • Dimensions: Approximately 15 × 11 × 7 inches (LxWxH).
  • Weight: About 8 lbs.
Read more
Quick view

Yaskawa CACR-SR07BE12M

  • Input Voltage: Three - phase AC 200V - 230V
  • Output Current: 7A
  • Output Power: 1.5kW or 0.75kW
  • Control Method: Vector control
  • Communication Interface: RS - 485
  • Protection Level: IP20
  • Output Frequency Range: 0.1 - 400Hz
  • Overload Capacity: 150% of the rated current for 60 seconds
  • Dimensions: 150mm * 240mm * 350mm
  • Weight: Approximately 1.14kg
Read more
Quick view

ZYGO ZMI-2002 8020-0211-1-J Precision Measurement System

Technical Specifications:
  • The ZMI-2002 operates based on innovative interferometry principles, offering nanometer-level precision for surface form measurements.
  • It supports a wide range of optical configurations to accommodate diverse measurement needs.
  • Capable of providing high-resolution data, which ensures accurate characterization of surfaces and components.
Read more
Quick view